Products
Showing 301–312 of 319 resultsSorted by price: low to high
-
Heavy-Duty Bearing Cup Installer
$181.32Part No: 20300CV
Heavy-Duty Bearing Cup Installer
$181.32Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints. The press plate and specific adapters make proper installation easy every time while also reducing the risk of damage to the driveshaft, yokes, and joints.
- Three adapters to fit SPL 140, 170, 250 Series drivelines
- Use on quick disconnect universal joint only
- Safer alternative to makeshift methods
- Can be used with hand and air tools
- Great partner tool for Heavy Duty U-Joint Puller (Part No.199) and Heavy Duty Yoke Puller (Part No. 497)
- Applications:
- Dana®/Spicer® SPL 140, 170, and 250 Series U-joints found in class 6-8 commercial vehicles and equipment
UPC: 047084203002
Shipping weight: 12.5lbs20300CV Heavy Duty Bearing Cup Installer Instructions
Quick View -
Brake Bleeder Tank
$183.21Part No: 855
Brake Bleeder Tank
$183.21This lightweight and easy-to-use, portable tank fills and bleeds both standard and power brakes in a single operation. Tank is easily pressurized with just a few strokes of the built-in hand pump.
- Eliminates the need for a compressor
- One (1) gallon capacity features extra-long hose, quick disconnect coupler, shut-off valve and pressure gauge
UPC: 047084008553
Shipping weight: 5.4lbs855 – Brake Bleeder Tank Manual
Quick View -
FWD Wheel Bearing Tool Set
$183.42Part No: 904CV
FWD Wheel Bearing Tool Set
$183.42The FWD Wheel Bearing Tool Set is a comprehensive kit of tools for the fast and effective removal and installation of wheel bearings on front wheel drive vehicles.
- For use on front wheel drive cars and light trucks
- Replace wheel bearings without having to remove the steering knuckle and strut assembly
- Eliminates the need for a front-end alignment once completed
- Reduces the changes of damage to hub and bearing
- Impact rated
- Also suitable for removing and installing large industrial bearings
UPC: 047084009048
Shipping weight: 25.2lbs904 – Wheel Bearing Tool Instructions
Quick View -
7-Ton Bar Type Puller Bearing Separator Set
$192.22Part No: 501CV
7-Ton Bar Type Puller Bearing Separator Set
$192.22This Puller/bearing separator set was created for difficult jobs. With the capacity for larger applications up to 7-tons, it also has a greater reach of 8 to 16 inches.
- Includes a Bearing Splitter with 4″ capacity, two sets of hex push puller legs, and an 8″ bar-type puller head mated with a custom thread forcing screw
- Professionals have a Puller-Bearing set for hard jobs up to 7-tons
- Larger applications and a greater reach 8″ to 16″
UPC: 047084005019
Shipping Weight: 17.05lbsQuick View -
Heavy-Duty U-Joint Puller
$195.60Part No: 199CV
Heavy-Duty U-Joint Puller
$195.60A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
- Manufactured from high-grade materials for strength and durability
- Engineered for use up to a 1″ Impact wrench
- Reduces damage to the driveshaft, yokes, joints or bearing cups
- Eliminates dangerous vice-and-socket or hammering removal methods
- Applications:
- U-Joints with bearing cups 1.5″ to 2.2″ O.D
- Spicer 1610, 1710, 1760, 1810, 1880 Series
- Spicer SPL 140, 170, & 250 Life Series
- Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
- Meritor RPL 20, 25 Permalube™ Series
UPC: 047084001998
Shipping Weight: 11.85lbsQuick View -
Relay Circuit Tester
$203.30Part No: 76CV
Relay Circuit Tester
$203.30The Relay Circuit Tester tests an entire circuit from the battery to the component in question as well as determining if the relay itself is functioning properly. With the push of a button, the technician has the ability to instantly determine the problem, with the circuit without the use of a multi-meter.
- Comes in a blow molded case with a high-density foam insert
- Works with both 12 and 24-volt systems
- Easily accessible ports for use with other diagnostic tools
- Patent pending
- 1 year warranty
UPC: 047084000762
Shipping Weight: 2.75lbs76 – Relay Circuit Pro – Replacement Parts
Quick View -
Dent Puller & Knocker Set
$208.78Part No: 49800CV
Dent Puller & Knocker Set
$208.78The paintless dent repair kit comes with the most popular adapters used for auto body pulling applications. Heavy duty 9-1/2LBS hammer easily helps pulling dents without strain or any need for extra specialty tools. All adapter attachments are heat treated and plated for strength, longevity and durability.
- Kit comes with the most popular adapters for auto body pulling applications
- Comes with 9-1/2 LBS slide hammer
- All attachments are heat treated and plated for strength and longevity
UPC: 047084498002
Shipping weight: 23lbsQuick View -
Ball Joint Removal & Installation Set
$213.07Part No: 196
Ball Joint Removal & Installation Set
$213.07The ball joint super set includes tools needed to remove and install press-fit parts such as ball joints, universal joints, and truck brake anchor pins. Impact rated.
Contains:
- 3 receiver tubes
- 2- 3/4″ ID X 3″ OD
- 2- 1/4″ ID x 2 1/2″ OD
- 1- 3/4″ ID X 2″ OD
- Installation and removing adapters
- 1 installing cup
- 1 receiving cup
- 1 installing adapter
UPC: 047084001967
Shipping Weight: 14.83lbQuick View - 3 receiver tubes
-
11 PC Deutsch Terminal Service Set
$218.68Part No: 55000CV
11 PC Deutsch Terminal Service Set
$218.68The 11PC Master Terminal Service kit is for use on Deutsch open and closed barrel terminals, Weather Pack, Metri Pack, and other terminals. It is designed to crimp and release the Deutsch terminals found through various industries.
Contains:
- 3 Terminal crimping tools
- 1 Open barrel crimping tools for 14-24 gauge wire and seals
- Weather Pack crimping tool
- Weather Pack release tools
- Terminal release tools
UPC: 047084550007
Shipping weight: 6lbs55000 11 PC. Deutsch Terminal Service Set Flyer
55000 11PC Deutsch Terminal Service Kit Breakdown
Also available:
55100 – 6 PC Deutsch Terminal Service SetQuick View -
Sheppard M100 Pitman Arm Puller
$218.68Part No: 18620CV
Sheppard M100 Pitman Arm Puller
$218.68Our M100 pitman arm puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M100 steering gears found on many class 6 –8 vehicles.
- Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
- Constructed of high-strength materials for increased pulling power and superior durability
- Rated for usage with up to a 3/4″ drive impact wrench
- Simple and effective design with a wide application range
Applications: Class 6 –8 vehicles, including but not limited to highway transportation vehicles, buses, RVs, and other equipment
Warranty: Limited Lifetime Against Defects
UPC: 047084186206
Shipping weight: 4.02lbs18620 Sheppard M100 Pitman Arm Puller Flyer
Also available:
18630 Sheppard M110 Pitman Arm Puller
18640 Intermediate Pitman Arm PullerQuick View -
Sheppard M110 Pitman Arm Puller
$219.77Part No: 18630CV
Sheppard M110 Pitman Arm Puller
$219.77Our M110 Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M110 steering gears found on many class 6 – 8 vehicles.
- Replaces less effective and often destructive methods to remove pitman arms
- Constructed of high-strength materials for increased pulling power
- Rated for usage with up to a 3/4″ drive impact for faster removal
- Applicable to highway transportation vehicles, RVs, buses, and equipment
UPC: 047084186305
Shipping weight: 11lbs18630 – Sheppard M110 Pitman Arm Puller Instructions
18630 Sheppard M110 Pitman Arm Puller Flyer
Also available:
18620 Sheppard M100 Pitman Arm Puller
18640 Intermediate Pitman Arm PullerQuick View -
Blind Hole Puller Set
$219.78Part No: 29CV
Blind Hole Puller Set
$219.78- Designed for removing bearings from a recessed location, such as a pilot bearing.
- Set includes a 2-1/2 lbs. slide hammer with T-handle and four collets, for a wide range of applications with 3/8″– 1-1/4″ (10mm to 32mm) inner diameter holes
- Easy to operate. Choose the appropriate collet by application, insert the collet into the inner portion of the bearing, expand the collet, thread on the slide hammer to attach, and remove the bearing.
29 Blind Hole Puller Set Breakdown
Quick View
