Products
Showing 229–240 of 318 resultsSorted by popularity
-
Two & Three Jaw Combination Puller, 4″ Spread
$54.57Part No: 134
Two & Three Jaw Combination Puller, 4″ Spread
$54.57These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 2-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 3-1/2″, 4″ spread, center screw 3/8″ – 24″ x 4-1/4″
UPC: 047084001349
Shipping Weight: 1.4lbsAlso available:
951 Two & Three Jaw Combination Reversible Puller
952 Two & Three Jaw Adjustable Combination PullerQuick View -
LCD Test Light
$65.86Part No: 78
LCD Test Light
$65.86The LCD Test Light can be used for testing both power and ground voltage on 6v, 12v, 24v, and 48v DC circuits. Equipped with a coiled cord that can extend up to 12 ft.
- Backlit LCD display, lights red and green depending on test
- Stainless steel probe
- Long reach cord, up to 12ft
- For use on 6v, 12v, 24v, and 48v DC systems.
- Warning: For use with DC circuits only.
- Instructions:
- Test for Power
1) Connect lead to a good ground.
2) Touch probe to circuit terminal or wire.
3) LCD should light red and will display voltage in circuit. - Test for Ground
1) Connect lead to a good power supply.
2) Touch probe terminals, wires or chassis to locate ground.
3) LCD should light green and display voltage at good ground connection.
- Test for Power
UPC: 047084000786
Shipping Weight: .5lbsAlso available:
70 Heavy Duty Circuit Tester
81 Logic Light Circuit TesterQuick View -
Pilot Bearing Puller
$53.15Part No: 31
Pilot Bearing Puller
$53.15- When working space is limited this puller is needed to remove flywheel pilot bearings from automobile trucks and tractors.
- Can also be used to pull bushings or bearings from generators or starters
- Only 7-1/2″ long
- Includes 1/2” – 1-1/4″ I.D. capacity jaws
UPC: 047084000311
Shipping Weight: 2.3lbsQuick View -
Pilot Bearing Puller with Slide Hammer
$64.09Part No: 28
Pilot Bearing Puller with Slide Hammer
$64.09- Removes bearings or bushings on flywheels, pumps, generators, etc.
- 1/2“ – 1-3/8″ (13mm-32mm) I.D. capacity jaws.
- Includes 3lb. Slide Hammer
- The middle rod stretches forged steel jaws, pushing them out against the bearing for effortless extraction of bearing or any other parts that are in confined spaces
UPC: 047084000281
Shipping Weight: 3.65lbsQuick View -
Magnetic Field Indicator
$27.99Part No: 82000CV
Magnetic Field Indicator
$27.99- Immediately verify an active or inactive ignition coil by putting the tip near the coil.
- A blue LED light will display every time a magnetic field is detected.
UPC: 047084820001
Shipping weight: .11lbs82000 – Magnetic Field Indicator Flyer
Quick View -
11 PC Impact Adapter Socket Set
$159.00Part No: 48200CV
11 PC Impact Adapter Socket Set
$159.00- 8 adapters with four drive sizes
- 3 universal joint that come in three drive sizes
- Secure connection with detent ball and pin and ring capacities
UPC: 047084482001
Shipping Weight: 3.95lbsQuick View -
Light Duty Yoke Puller
$74.99Part No: 49750CV
Light Duty Yoke Puller
$74.99- Used to remove automotive yokes on drive shafts and transmissions
- Reduces the risk of damaging yokes
- Made from high quality steel to provide reliable use for years
- Used on Ford® F150/F350, Chevrolet® 1500/3500, Dodge® RAM 1500/3500
UPC: 047084497500
Shipping Weight: .43lbsAvailable on backorder
Quick View -
Tie Rod End Puller
$22.52Part No: 194
Tie Rod End Puller
$22.52Designed to easily separate tie rod ends and separate pitman arms from steering gears. Can be used to remove both tie rod ends and pitman arms on many small domestic rear wheel drive cars and light trucks.
- Cap screw has a 3/8″ Female drive
- 1-15/16″ of pull travel and over 1″ of jaw opening
- Replacement center screw: Part 194-1
UPC: 047084001943
Shipping Weight: 1lbQuick View -
Ball Joint Separator
$33.09Part No: 184
Ball Joint Separator
$33.09This ball joint separator is used to separate ball joints from spindle support arms on almost all domestic and import, front wheel drive vehicles. This tool has two different joint positions that is adjustable up to 2″ for different sized ball joint applications.
- Use to separate ball joints from spindle
- Threaded forcing screw allow the tool to be used on different size ball joints
- Fits on virtually all domestic and import vehicles
- 13/16″ opening
- Replacement pin assembly: 184-1
- Replacement screw: 184-2
UPC: 047084001844
Shipping Weight: 2.75lbsQuick View -
Tie Rod End Tool Open Jaw 19mm
$38.15Part No: 182
Tie Rod End Tool Open Jaw 19mm
$38.15The tie rod end tool is designed to force out tie rod ends from spindles and steering arm on virtually all domestic and import cars with tie rod screw diameter up to 3/4″. Comes with a swivel head cup style end that removes the chance of damage and frustration caused by other less effective methods like hammering.
- Force out tie rod ends from spindles with tie rod screw diameter up to 3/4″
- Forces steering arms on virtually all domestic and import cars
- Opens to 1-5/8″
- Replacement center screw and swivel: 182-1
UPC: 047084001820
Shipping Weight: 1.5lbsAlso available:
188 Outer Tie Rod Remover
194 Tie Rod End PullerQuick View -
Deburring Chamfer Tool Bit
$24.00Part No: 49100CV
Deburring Chamfer Tool Bit
$24.00Designed to clean and repair damaged bolts and fasteners. Can be used for hard steel applications with lubricating oil to improve tool performance. NOT recommended for use with Impact driver.
- Applicable for use on threads from 1/4″ to 3/4″ in diameter.
- 72 Degree deburring capacity
- 3-HSS blades
- 1/4″ bit Dr. to fit any drill type
UPC: 047084491003
Shipping Weight: .16lbsQuick View -
Dodge® Wheel Hub Removal Adapter
$21.03Part No: 90300CV
Dodge® Wheel Hub Removal Adapter
$21.03- Designed to easily remove the front hubs of Dodge® 2500 and 3500 trucks
- Uses the force of the power steering system to loosen the hub assembly, instead of having to other methods which can possibly damage the hub assembly
- Quickly adapts for Ford and Dodge applications
- Hub Bolt size 3/4″-19MM
UPC: 047084903001
Shipping weight: 1.3lbsQuick View
