Products
Showing 205–216 of 318 resultsSorted by popularity
-
8 PC Stripped Hex Screw Set, SAE
$47.42Part No: 440CV
8 PC Stripped Hex Screw Set, SAE
$47.42This SAE Stripped Hex Bit Socket set comes with a full range of the most common-sized hex sockets to remove rounded or stripped fasteners, with internal hex drive heads.
- Can also be used on new screws
- Reverse twist in the hex key bites into stripped out hex for easy removal.
- Full range to remove most common sizes:
- 3/8″ DR: 3/16″, 7/32″, 1/4″
- 1/2″ DR: 5/16″, 3/8″, 1/2″, 9/16″, 5/8″
UPC: 047084004401
Shipping Weight: 2lbsQuick View -
4″ Replacement Stone for Part 360, Fine
$13.49Part No: 361-01
4″ Replacement Stone for Part 360, Fine
$13.49Replacement stones for the Part 360
- 4″ Stone
- Fine Grit, 400 Grit
- Set of 3
- Cotter Pins Included
- Hone not included
UPC: 047084361016
Shipping Weight: .25lbsQuick View -
Heavy Duty U-Joint Puller
$178.00Part No: 199CV
Heavy Duty U-Joint Puller
$178.00A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
- Manufactured from high-grade materials for strength and durability
- Engineered for use up to a 1″ Impact wrench
- Reduces damage to the driveshaft, yokes, joints or bearing cups
- For U-Joints with bearing cups 1.5″ to 2.2″ O.D.
- Eliminates dangerous vice-and-socket or hammering removal methods
Applications:
- U-Joints with bearing cups 1.5″ to 2.2″ O.D
- Spicer 1610, 1710, 1760, 1810, 1880 Series
- Spicer SPL 140, 170, & 250 Life Series
- Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
- Meritor RPL 20, 25 Permalube™ Series
UPC: 047084001998
Shipping Weight: 11.85lbsQuick View -
Adjustable Three-Legged Puller
$103.86Part No: 957
Adjustable Three-Legged Puller
$103.86- 3 jaw, adjustable puller
- 2” to 5” Diameter
- 2″ Depth
- Jaws stay put before tension is applied for ease of use
- Low profile to reach into tight places
- A versatile puller for all your pulling needs
UPC: 047084009574
Shipping weight: 2lbsQuick View -
Timing Pulley Puller
$107.20Part No: 181
Timing Pulley Puller
$107.20The Face Groove Timing Pulley Puller is designed for removing drive pulleys with face grooves with 3, 6, or 9 slots. With adjustable legs, the tool is adaptable to different pulley diameters ranging from 42mm – 82mm.
- Removes a pulley absolutely free of any risk of damage
- Adaptable to different pulley diameters, as the legs are adjustable
- For removing pulleys with 3, 6, 9 slots
- Range: 42 -82mm
UPC: 047084001813
Shipping Weight: 2.35lbsQuick View -
Double & Bubble Flaring Tool Set
$105.17Part No: 82900
Double & Bubble Flaring Tool Set
$105.17This set contains the tools necessary to create single or double flares, as well as Bubble Flares, on soft steel and copper tubing.
- 2-in-1 kit contains the Double Flare Tool (163) and the Bubble Flare Tool (82700) in one convenient blow molded case.
- Single & Double Flares 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing.
- Bubble Flares 4.75mm, 6mm, 8mm, 10mm tubing.
- Includes Tube Cutter (151).
UPC: 047084829004
Shipping weight: 4.4lbsQuick View -
Ford® & Mazda® Engine Valve Timing Kit
$48.37Part No: 38300
Ford® & Mazda® Engine Valve Timing Kit
$48.37This easy alignment tool takes place of pins needed in similar tools. Pins can be hard to access and add time to job in cases where other components are needed. This also eliminates the user error with pins that can lead to pins being bent and stuck.
- For servicing the timing belt chains, head gaskets, or other valve train repairs on Ford®, Mercury®, and Mazda vehicles
- Applications: 2.0L DOHC Zetec engines found in 1994-2003 Ford® and Mercury® vehicles and 2004-2012 2.5L DOHC, 2.3L DOHC 4V, and 2.0L DOHC engines that are found in Ford®, Mercury®, and Mazda® vehicles
- Easy alignment tool is screwed into sparkplug hole and turned by wrench to align cams.
- Tool positions number 1 cylinder to top dead center by holding number 2 or 3 cylinder to bottom dead center
UPC: 047084383001
Shipping weight: 1.45lbsQuick View -
Swivel Oil Filter Wrench
$7.85Part No: 995 (241-1)
Swivel Oil Filter Wrench
$7.85- Tool features a swivel handle which allows user to get to filters in hard-to-reach areas.
- Wide, dimpled band securely grips filters without crushing.
- Easy grip vinyl handle.
- Also available:
- 994 Swivel Oil Filter Wrench fits filters 2-7/8″ to 3-1/4″ (73mm – 83mm) diameter
UPC: 047084009956
Shipping weight: 1lbQuick View -
8 PC 1/2″ DR. Axle Nut Socket Set, 12-PT
$145.00Part No: 976CV
8 PC 1/2″ DR. Axle Nut Socket Set, 12-PT
$145.00This set features eight heavy-duty metric sockets that fit axle nuts and automatic transmission tail output shafts on Toyota®, Lexus®, Chrysler®, Dodge®, Jeep®, Audi®, Volkswagen®, and BMW® as well as many other makes.
- 12 point sockets
- 1/2″ drive
- Includes socket sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm
- Comes with a durable blow-molded case
UPC: 047084009765
Shipping weight: 11.56lbs976 12PT Metric Axle Nut Socket Set Flyer
976 12 PT Metric Axle Nut Socket Set Breakdown
Also available:
966 – 8 PC, 1/2″ DR. Axle Nut Socket Set, 6-PTQuick View -
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17Part No: 951
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 5-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 3-1/2″, 7″ spread, center screw 9/16″ – 20″ x 6-3/8″
UPC: 047084009512
Shipping weight: 3.7lbsAlso available:
134 Two & Three Jaw Combination Puller, 4″ Spread
952 Two & Three Jaw Adjustable Combination Puller, 8″ SpreadQuick View -
Extra-Long Torx Screwdriver Set, Tamper-Proof
$45.00Part No: 917
Extra-Long Torx Screwdriver Set, Tamper-Proof
$45.00- Long shaft for hard to reach areas.
- Made of S-2 steel for strength.
- Tamper proof design
- Set Includes: T-10, T-15, T-20, T-25, T-27, and T-30.
UPC: 047084009178
Shipping weight: 2.05lbs917 Tamperproof Extra Long Torx Screwdriver Set Breakdown
Also available: 912 Extra-Long Torx Screwdriver Set
Quick View -
Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″
$36.25Part No: 892
Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″
$36.25- Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
- Use with 1/2″ square drive tool.
- Fits filters 4-21/32″ to 5-5/32″ (118mm-130mm) in diameter
UPC: 047084008928
Shipping weight: 1.2lbAlso available:
Quick View