Products
Showing 49–60 of 319 results
-
SAE In-Line Flaring Tool
$42.00Part No: 164
SAE In-Line Flaring Tool
$42.00The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping, keeps flares centered, and makes the job of flaring easier. Superior to bar type flaring tools.
- Make Perfect Flares Every Time!
- Use to make single and double flares
- Will do 3/16″, 1/4″ and 5/16″ flares
- Low profile design allows for use on or off the vehicle
- Designed to be used with a ratchet to make flares easier
- In line design makes a more accurate flare
- Double clamp and hex screw design keeps tubing locked tightly in position
- For use on thin walled steel and copper tubing
- Available in SAE (164), Metric (154) and Auto-Specific Set (161)
- Patent Pending
UPC: 047084001646
Shipping Weight: 1.5lbsQuick View -
SAE Double Flaring Tool
$55.00Part No: 163
SAE Double Flaring Tool
$55.00This 45 degree double flaring tool set is designed to withstand the high pressure necessary to double flare soft steel tubing as well as single flare soft copper aluminum and brass tubing.
- Includes: Five (5) double flare adapters drop forged compressor yoke and bar assembly w/ size capacity – 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″
- Also available in Metric, Part #153
UPC: 047084001639
Shipping Weight: 2.65lbsQuick View -
Ripple Quick Tester
$50.00Part No: 73
Ripple Quick Tester
$50.00In many vehicles, the alternator is in a difficult to access location, making direct testing methods problematic. The Quick Ripple Tester is designed to easily and efficiently test alternators for a variety of issues, including excessive ripple, through the DC outlet cigarette lighter.
- Allows the user to test an alternator for bad diodes, bad stators, and intermittent diodes or stators without ever lifting the hood.
- Simply plug the tester into the vehicles DC port and the tester will give results in a series of LED flashes to pinpoint exact problem.
- Cuts alternator diagnostic time drastically.
- Patent Pending
UPC: 047084000731
Shipping Weight: .25lbsQuick View -
Relay Circuit Pro
$185.00Part No: 76CV
Relay Circuit Pro
$185.00The Relay Circuit Pro tests an entire circuit from the battery to the component in question as well as determining if the relay itself is functioning properly. With the push of a button, the technician has the ability to instantly determine the problem, with the circuit without the use of a multi-meter.
- Comes in a blow molded case with a high-density foam insert
- Works with both 12 and 24-volt systems
- Easily accessible ports for use with other diagnostic tools
- Patent pending
- 1 year warranty
UPC: 047084000762
Shipping Weight: 2.75lbs76 – Relay Circuit Pro – Replacement Parts
Quick View -
Rectangular Inspection Mirror with Dual LED Lights
$10.64Part No: 35CV
Rectangular Inspection Mirror with Dual LED Lights
$10.64Use the long-reach and dual LED lights to view dark and dim recesses during inspections and when checking for leaks.
- Head swivels nearly 360°to inspect hidden and hard-to-reach areas
- ABS plastic shroud with dual LEDs to brighten dim or dark areas for better visibility
- Ball joint connection is sturdy enough to hold the head at nearly any angle
- Unit closes to 6-3/4″ and stainless-steel tubes extend to 30“
- Features an ergonomic, textured grip
- Batteries included (2-CR2032)
Applications:
Numerous applications in the automotive field, ideal for when a borescope is not available.UPC: 047084000359
Shipping Weight: .25lbsQuick View -
Recessed Body Clip Pliers
$30.45Part No: 56CV
Recessed Body Clip Pliers
$30.45These Recessed Body Clip Pliers are designed with the ability to remove push pins and body clips from bumpers and other areas of the vehicle that are recessed or have limited access.
- Features a long reach with specially designed ends that help pop the clip off so that the user does not damage the clip by twisting or prying.
- Handles made of glass filled nylon to prevent scratches.
- Works great on almost all push pins or body clips.
UPC: 047084000564
Shipping Weight: .35lbsQuick View -
Rear Seal Repair Kit
$325.00Part No: 499CV
Rear Seal Repair Kit
$325.00Safely and easily remove and install rear main seals and crankshaft wear rings for Ford® 7.3 Powerstroke™ engines.
- Designed to fit 1994-2003 Ford® 7.3L diesel engines in 3/4 and 1- Ton Trucks (not for Navistar engines)
- Complete kit with the tools you need to correctly remove and install the rear main oil seal and wear ring on the crankshaft
- Eliminates makeshift methods for seal removal and install that could potentially damage the new seal or crankshaft
UPC: 047084004999
Shipping Weight: 12.95lbsQuick View -
Rear Axle Bearing Puller Set
$85.00Part No: 91800CV
Rear Axle Bearing Puller Set
$85.00Designed to remove flange type, semi-floating rear axle bearings in most late model, rear-wheel drive cars and light-trucks.
• Includes 3 bearing pullers with a range from 1″ – 2-7/8″
• For flange-type, semi-floating bearings
• Designed to capture rear axle bearings firmly
• Comes in a blow-molded caseUPC: 047084918005
Shipping Weight: 2.9lbsQuick View -
Ratcheting Harmonic Balance Puller
$88.00Part No: 38000CV
Ratcheting Harmonic Balance Puller
$88.00Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.
- Three ratcheting legs with puller feet eliminate the need for bolts
- No need to remove the radiator or other components with this compact design
- Legs quickly adjust and hold their position
- Push turn click design
Applications:
FORD 5.0 Coyote
GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
MISC Most three and six spoke harmonic balancers/pulleysUPC: 047084380000
Shipping Weight: 2.5lbsQuick View -
Ratcheting Chain Wrench
$45.00Part No: 878
Ratcheting Chain Wrench
$45.00The ratcheting chain wrench has the versatility to be used on any object with a diameter range from 5/8″ to 5″. You can apply to various shapes such as round, square, hexagon and octagon objects. Features an ergonomic soft grip, 13″ handle.
- Chain wrench can be used on any object with a diameter from 5/8″ to 5″
- Allows turning in any direction without removal from work area
- Grips any shape from round, square, hex and octagon
- Ratcheting action allows regripping without removal from work
- 16″ chain length
- 13″ handle with ergonomic soft grip
- Designed for confined areas when an ordinary pipe wrench will not fit
UPC: 047084008782
Shipping weight: 2.15lbsQuick View -
Rapid Wire Strippers
$68.77Part No: 55210CV
Rapid Wire Strippers
$68.77The 55210 Rapid Wire Stripper, consistently create professional results every time, by piercing the wires insulation and removing it in one squeeze of the handles. Use with multiple automotive and home wiring ranging from 8-30AWG. The integrated wire cutter is capable of cutting up to 10 AWG wire.
- Fits and Adjusts to a variety of wire sizes
- Adjustable blade tension setting for insulation thickness and temperature variations
- Hardened steel stripping blades and grooved steel clamping plates
- Mechanical wire release for trouble-free operation
- Rubberized grips on handle for comfort
- Built-in wire cutter
UPC: 047084552100
Shipping weight: .75lbs55210 Wire Rapid Strippers Flyer
Also available:
55310 – Low Profile Wire StripperQuick View -
Radiator Hose Pinch Off Pliers
$11.80Part No: 16000
Radiator Hose Pinch Off Pliers
$11.80- Eliminates the need to drain systems when servicing cooling systems.
- Pliers squeeze heater or radiator hoses shut and jaws swivel for parallel clamping.
- Automatic locking ratchet.
- May also be used to pinch off vacuum lines and fuel lines.
- Caution: Not for use on wire reinforced radiator hoses.
UPC: 047084160008
Shipping weight: .85lbsQuick View
