CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

  • Exhaust Tail Pipe Cutter

    Exhaust Tail Pipe Cutter

    $49.00

    Part No: 764

    Exhaust Tail Pipe Cutter

    $49.00
    • Comprised of thirteen, large diameter (19mm) cutting wheels that cut deep into exhaust pipes.
    • Will not leave burrs.
    • Ideal for heavier-walled European-type exhaust pipes.
    • Cuts pipe from 3/4″ to 3-1/4″ (19mm – 83mm) in diameter.
    • Only 1/4″ turn needed to cut.
    • Works well in hard to reach places.

    UPC: 047084007648
    Shipping weight: 1.2lbs

    Quick View
  • Euro Stretch Belt Installation Tool

    Euro Stretch Belt Installation Tool

    $18.97

    Part No: 735

    Euro Stretch Belt Installation Tool

    $18.97
    • Larger with different pin configuration to accommodate larger pulleys with different designs found on many European vehicles.
    • Quickly and easily installs stretch belts.
    • Will not damage stretch belts during installation.
    • Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
    • Eliminates the belt tensioner.
    • Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
    • Patented

    UPC: 047084007358
    Shipping weight: .2lbs

    Quick View
  • Euro & GM® Oil Socket Set

    Euro & GM® Oil Socket Set

    $32.58

    Part No: 996

    Euro & GM® Oil Socket Set

    $32.58

    A set of metric-socket oil filter wrenches covering a broad range of applications on both domestic vehicles and imports such as Audi®, BMW®, GM® and VW®. These durable and high-quality forged 3/8″ drive sockets are designed to last.

    • This versatile three piece socket set includes 6 point oil filter sockets:
      • Part #996-1: 27 mm Socket
        • Applications: Mercedes-Benz® 1.8L I4 Cadillac® STS 3.2L V6
      • Part #996-2: 32 mm Socket
        • Applications: Saabs® 2.2L GM® Ecotec
      • Part #996-3: 36 mm Socket
        • Applications: BMW® M52 M60 M62 M70 and M73 engines; M-B OM604 605 and 606 engines; Audi® and VW® VR6 engines.
    • Sockets can be used with a 3/8″ drive ratchet or breaker bar.

    UPC: 047084009963
    Shipping weight: 1.2lbs

    Quick View
  • Engine Cylinder Hone

    Engine Cylinder Hone

    $36.88

    Part No: 360

    Engine Cylinder Hone

    $36.88

    Extremely versatile hone for 2″ – 7″ (56mm – 178mm) diameter cylinders found on cars, trucks, buses, tractors, industrial engines and small, air-cooled engines.

    • Adjustable to all diameters within its range.
    • Flexible shaft controlled spring action; spread control limiters are features that contribute to faster changing from one cylinder to another with the fastest cutting action.
    • Includes 4″ (102mm) Medium Grit Stones.
    • Operate with a high or low speed drill.
    • Replacement Stones:
      • 361 Replacement Stone Medium Grit, 220-240 Grit. Set of 3
      • 361-01 Replacement Stone Fine Grit, 400 Grit. Set of 3
      • 361-02 Replacement Stone Coarse Grit, 100 Grit. Set of 3

    UPC: 047084003602
    Shipping Weight: 1.1lbs

    Quick View
  • Dual View WiFi Borescope

    Dual View WiFi Borescope

    $150.00

    Part No: 86

    Dual View WiFi Borescope

    $150.00

    Most borescopes use mirrors to achieve alternate viewing angles. Our newest borescope utilizes dual hi-res cameras, bright LED illumination, and up to three times zoom to give users superior viewing and video capture capabilities.

    • Hi-Res 1080p cameras provide front and side video and image capture
    • The camera, lens, and cable are IP 67 rated water resistance
    • Ultra-bright lighting provided by seven total LEDs
    • Flexible semi rigid 58″ cable
    • Unit transmits and connects to devices via an independent Wi-Fi signal up to 30ft away, giving it the freedom to be used everywhere
    • Replacement attachment kit: 86-1
    • 1 year warranty

    UPC: 047084000861
    Shipping Weight: .4lbs

    86 Dual View WiFi Borescope Cal-Van Manual

    86 Dual View WiFi Borescope Flyer

    Also available:
    85 Pistol Grip WiFi Borescope
    84 WiFi Borescope

    Available on backorder

    Quick View
  • Drop and Drive Spring Loaded Bit Holder

    Drop and Drive Spring Loaded Bit Holder

    $18.86

    Part No: 494

    Drop and Drive Spring Loaded Bit Holder

    $18.86

    Presenting the patented magnetic bit driver with a guide that retracts and extends on its own every time, unlike any driver on the market! For use anywhere, inside and out, from putting up drywall and cement board to hanging sheathing or installing decking. Reloads faster, drop the fastener in and drive it.

    • Spring-loaded bit adapter that guides it drives
    • Guide will not only retract but will also extend back
    • Guide locks to easily interchange bits
    • Internal magnet holds bits in place
    • For use with power tools including impact drivers
    • Accepts existing, common 1/4″ hex bits
    • Limited lifetime warranty

    UPC: 047084004944
    Shipping Weight: .13lbs

    494 Drop and Drive Sales Sheet

     

    Quick View
  • Drain Plug Repair Kit

    Drain Plug Repair Kit

    $96.00

    Part No: 38400CV

    Drain Plug Repair Kit

    $96.00

    The drain plug repair kit designed to repair aluminum oil pans with damaged drain plug threads size M12x1.75, commonly found in GM®, Ford® and Mazda®.

    • Inserts allow for original drain plug to be used instead of aftermarket plug
    • Works with drain plugs commonly found in but not limited to: GM®, Ford® and Mazda® aluminum Oil Pans. General Motors® vehicles 1999-2004 CK Engine ASM V8/LR4/4. 8V, LM7/5.3T, LQ4/6.0U
    • REPAIRS: General Motors® vehicles 2003 – 2005 ST1 Engine ASM-4.3L V6/ LU3/4.3X
    • Kit contains: Drill, counter bore, tap, driver guide, (5) 12mm length inserts

    UPC: 047084384008
    Shipping weight: 1.35lbs

    38400 Instructions

    38400 – Drain Plug Repair Kit Replacement Parts

    38400 Drain Plug Repair Kit Flyer

    Quick View
  • Double Deburr Tool

    Double Deburr Tool

    $25.27

    Part No: 169

    Double Deburr Tool

    $25.27

    The success of creating a flare with a good seal depends on more than the flaring tool you use. It often comes down to preparation and finish. This tool can clean the inner and outer edges before you begin and clear up and remaining debris after. It is the perfect companion to any of our flaring tools and an upgrade to the one supplied in certain kits.

    • For removing burrs of inner and outer tube diameters when performing secondary operations to tubing, steel or copper
    • Aluminum, lightweight, body and a sharp, high-speed, steel cutting edges to hold up in any environment
    • Inner reamer is a retractable for safety
    • Works with tubing range of 1/8″ – 1/2″ (3mm – 12mm)

    UPC: 047084001691
    Shipping Weight: .44lbs

    169 Double Deburr Flyer

    Quick View
  • Double & Bubble Flaring Tool Set

    Double & Bubble Flaring Tool Set

    $105.17

    Part No: 82900

    Double & Bubble Flaring Tool Set

    $105.17

    This set contains the tools necessary to create single or double flares, as well as Bubble Flares, on soft steel and copper tubing.

    • 2-in-1 kit contains the Double Flare Tool (163) and the Bubble Flare Tool (82700) in one convenient blow molded case.
    • Single & Double Flares 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing.
    • Bubble Flares 4.75mm, 6mm, 8mm, 10mm tubing.
    • Includes Tube Cutter (151).

    UPC: 047084829004
    Shipping weight: 4.4lbs

    Quick View
  • Dodge® Wheel Hub Removal Adapter

    Dodge® Wheel Hub Removal Adapter

    $21.03

    Part No: 90300CV

    Dodge® Wheel Hub Removal Adapter

    $21.03
    • Designed to easily remove the front hubs of Dodge® 2500 and 3500 trucks
    • Uses the force of the power steering system to loosen the hub assembly, instead of having to other methods which can possibly damage the hub assembly
    • Quickly adapts for Ford and Dodge applications
    • Hub Bolt size 3/4″-19MM

    UPC: 047084903001
    Shipping weight: 1.3lbs

    Quick View
  • Dodge® Hub Removal Tool

    Dodge® Hub Removal Tool

    $35.95

    Part No: 90701CV

    Dodge® Hub Removal Tool

    $35.95

    Uses the force from the vehicle’s power steering system to easily free the front wheel hubs, without damaging the hub or other components.

    • Designed to remove the front hubs of 3/4-ton (2500) and 1-ton (3500) Dodge trucks
    • Reduces the time it takes to complete front-end related jobs such as hub removal, replacing axle shafts, U-joint, and axle seals
    • Replaces the 90300CV

    UPC: 047084907016
    Shipping weight: 1.04lbs

    Quick View
  • Dodge® Hub Nut Socket

    Dodge® Hub Nut Socket

    $14.25

    Part No: 90703CV

    Dodge® Hub Nut Socket

    $14.25

    Fits rear axle lock nuts of Dodge®/ Ram®trucks with six holes. Use this tool when removing and installing rear wheel hubs without the struggles and potential of damage other methods cause.

    • Dodge® / Ram®Trucks 1500 -5500 model years 2006 –2014
    • Reduces damage to components
    • Great tool to use when torqueing rear wheel bearings
    • Heavy-duty, one-piece construction
    • Direct comparison to Mopar® 8954A
    • Rust resistant finish
    • Utilizes a 3/8″ square drive

    Detailed Applications: (Chassis Codes: D2, DC, DD, DH, DJ, DP, DR, DS)
    2006 (Ram) –System (3-differential and driveline)
    2007 (Ram) –System (3-differential and driveline)
    2008 (Ram) –System (3-differential and driveline)
    2009 (Ram 2500/3500) –System (3-differential and driveline)
    2010 (Ram Cab Chassis, 1500, 2500, 4500) –System (3-differential and driveline)
    2011 (Ram 1500) –System (3-differential and driveline)
    2012 (Ram 1500) –System (3-differential and driveline)
    2013 (Ram HD, Cab Chassis, 2500, 4500) –System (3-differential and driveline)
    2014 (Ram HD, Cab Chassis, 2500, 4500, 4500/5500 Cab Chassis) –System (3-differential and driveline)

    UPC: 047084907030
    Shipping Weight: .8lbs

    90703 Dodge Front Hub Locknut Socket Flyer

    Quick View