Products
Showing 145–156 of 319 results
-
GM® Thermostat Wrench
$21.00Part No: 751CV
GM® Thermostat Wrench
$21.00The GM® Thermostat Wrench is designed to work on GM® 3.1 & 3.4 liter, V6 engines. A common job on these motors, as is in all motors, is thermostat replacement and to do this you must remove the thermostat housing. In these applications, the bottom housing bolt is almost inaccessible without removing other parts – until now.
- Unique shape and design allows users to remove and install housings quickly
- 13 mm
- 12-point with special bends
- Works on GM® 3.1 and 3.4 liter, V6 engines
UPC: 047084007518
Shipping weight: .4lbsQuick View -
FWD Wheel Bearing Tool Set
$166.91Part No: 904CV
FWD Wheel Bearing Tool Set
$166.91- For use on front wheel drive cars and light trucks
- Replace wheel bearings without having to remove the steering knuckle and strut assembly
- Eliminates the need for a front-end alignment once completed
UPC: 047084009048
Shipping weight: 25.2lbsQuick View -
Fuel Pump Locking Ring Tool
$43.95Part No: 25310CV
Fuel Pump Locking Ring Tool
$43.95The Fuel Pump Lock Ring Tool is designed to quickly remove and install fuel tank lock rings when servicing fuel pump or fuel sending unit replacement. Universal design fits to any 7.25″ O.D. metal or plastic lock rings found on Ford®, Chrysler® and GM® vehicles.
- Unique design fits on multiple makes and models of fuel tank lock rings
- Easily removes and installs fuel tank lock rings when servicing fuel pump or fuel sending unit
- Allow for greater clearance on the top of fuel sending units than other versions
- Easily attach 1/2″ drive ratchet or breaker bar
- Professional grade steel with black oxide finish to resist rust and corrosion
- Applications (not limited) :
- Dodge® Ram 1500 2500 3500 4500
- Dodge® Charger Dodge Challenger SXT
- Chevy® Silverado Malibu, Maxx, Colorado, Avalanche, Trailblazer, Camaro SS
- 2005 Mercury® Montego
- 2005-2006 Pontiac® Bonneville & G6
- 2006 Chrysler® 300c
- 2011 Kia® Sorento
- Jeep® Wrangler, TJ Jeep, Compass
- Ford® Explorer, Ford F-150, Ford Ranger
- Mercury® Mariner
UPC: 047084253106
Shipping Weight: 1.15lbsQuick View -
Fuel Line Pliers
$48.89Part No: 689
Fuel Line Pliers
$48.89- These pliers are designed for quick connect, slide and lock couplers found on fuel lines on a variety of European and Domestic vehicles
- Applications include Audi®, GM®, Mercedes® including M- class, Toyota® and VW® models
- Also can pull fuel and vacuum hoses on Mercedes®
UPC: 047084006894
Shipping weight: .7lbsQuick View -
Front End Service Kit
$150.00Part No: 185CV
Front End Service Kit
$150.00The Front End Service Kit Includes five tools used in the servicing of ball joints, pitman arms, and tie rods on most vehicles. Constructed from steel alloy and chrome plated for durability and longevity.
Contains:
- A large and small Pitman arm puller for ball Joint applications.
- Three different tie rod pullers
- One ball joint separator
- Comes in a sturdy blow molded case
UPC: 047084001851
Shipping Weight: 12.02lbsQuick View -
Ford® Triton Spark Plug Thread Repair Kit, 3 Valve
$175.00Part No: 39300
Ford® Triton Spark Plug Thread Repair Kit, 3 Valve
$175.00The spark plug tends to break off in the cylinder head during maintenance. If this problem is not repaired properly it can result in damaged or unusable spark plug threads and in extreme cases the possibility of a spark plug blowout. Applicable in three-valve 5.4L and 6.8L gasoline engines built before 10/9/07 and three-valve 4.6L engines built before 11/30/07 found in many 2004–2008 Ford®, Lincoln®, and Mercury® vehicles. Repair those damaged threads or blowouts in 30 minutes or less per cylinder!
- Provides an effective method to thoroughly extract broken porcelain and other possible debris that occurs when removing spark plugs on these Ford® engines, preventing damage or a failed repair
- This kit will allow the user, with simple step-by-step instructions, to repair those damaged threads in 30 minutes or less per cylinder
- Saves time and money
- Works with Ford® Triton Motors ’04 to ’08
- Works with 4.6L, 5.4L, and 6.8L engines
- 16mm x 1.5 insert
- 3/4″ – 16 OD
- 393-100 Replacement inserts, 3 Valve Replacement Insert
UPC: 047084393000
Shipping Weight: 1.38lbs39300 – Three Valve Ford Triton Insert Kit Instructions
Quick View -
Ford® Triton Spark Plug Thread Repair Kit, 2 Valve
$265.00Part No: 38900
Ford® Triton Spark Plug Thread Repair Kit, 2 Valve
$265.00Designed to aid in repairing Ford® Triton engines modular cylinders heads (1996-2003). Average repair time as short as 25 minutes.
- A quality foolproof repair system that is cost-effective and fast
- High-quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer
- Works with Ford® Triton Motors ’96 to ’03
- Works with 4.6L, 5.4L, and 6.8L engines
- 14mm x 1.25 insert
- 3/4″ – 16 OD
- 389-100 Replacement inserts, 2 Valve Replacement Insert
UPC: 047084389003
Shipping Weight: 3.03lbs38900CV – Ford Triton Insert Installer Instructions
38900 – Ford Triton Spark Plug Thread Repair Kit (Replacement Parts)
Quick View -
Ford® Triton Spark Plug Extractor Master Set
$110.65Part No: 39500
Ford® Triton Spark Plug Extractor Master Set
$110.65In some cases the porcelain will break off in the sleeve and will need to be extracted in order for the 39500 to function effectively. This Tool is used to extract the broken porcelain or seized sleeves from broken spark plugs in 2003 to current Ford® Triton Engines. Unlike other tools that tell you to push the porcelain through the sleeve (Ford® says specifically not to do this), this tool adheres to the porcelain using a special perma-bond and then allows a user to extract the broken porcelain from the sleeve. In combination with the porcelain extractor, this combo tool also works to extract frozen and broken off spark plug sleeves for the same model Ford® Triton Engines. Specially machined guide works with extra long tap and extractor to make sure the job is done easily and quickly.
UPC: 047084003950
Shipping weight: 1.5lbsQuick View -
Ford® Triton Spark Plug Extractor Kit
$60.00Part No: 39100
Ford® Triton Spark Plug Extractor Kit
$60.00- This item works to extract frozen and broken off spark plug sleeves in 2004 to present Ford® Triton Engines.
- Specially machined guide works with extra long tap and extractor to make sure the job is done right.
- This is a heavily requested application that will only get more popular
UPC: 047084391006
Shipping weight: 1.7lbsQuick View -
Ford® Spark Plug Porcelain Extractor Kit
$25.00Part No: 39200
Ford® Spark Plug Porcelain Extractor Kit
$25.00This tool is used to extract the broken porcelain from broken spark plugs in 2003 to current Ford® Triton Engines. In some cases, the porcelain will break off in the sleeve and will need to be extracted in order for the 39100 to function effectively. Unlike other tools that tell you to push the porcelain through the sleeve (Ford® says specifically not to do this), this tool adheres to the porcelain using a special perma-bond and then allows a user to extract the broken porcelain from the sleeve.
UPC: 047084392003
Shipping weight: .49lbsQuick View -
Ford® Harmonic Balancer Holder
$35.00Part No: 38110CV
Ford® Harmonic Balancer Holder
$35.00A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford® engines, or it can be used to turn the engine when doing timing work. The studs of the tool go into the open spans of the harmonic balancer to apply force against them, while a 1/2″ drive ratchet or breaker bar is inserted into the knockout hole of the face plate for leverage. The open faceplate allows a socket to be applied to the retaining bolt of the balancer. While holding the balancer in place, the bolt can be loosened or tightened without the crankshaft turning with it. This tool can also be utilized to turn the engine when a procedure requires alignment of timing marks.
- Designed to fit multiple Ford® vehicles ranging from 1992 – 2016
- The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
- The ½” drive knockout allows for the use of a ratchet or breaker bar
- Ideal for rotating the engine for timing-related jobs
- Will not warp balancer
- Heavy-duty construction
UPC: 047084381106
Shipping weight: 1.19lbsQuick View -
Ford® Fuel Filter Wrench
$18.00Part No: 25200
Ford® Fuel Filter Wrench
$18.00- Low profile that allows mechanics to access those tough fuel filters in tight quarters.
- Used for the installation and removal on Ford® Power Stroke Diesel and International-Navistar Diesel engines.
- Other wrenches sometimes break off points of the lid due to pressure not being distributed by the wrench, but this tool spreads the force over six points, preventing damage.
UPC: 047084252000
Shipping weight: 1lbQuick View
