Products
Showing 109–120 of 319 results
-
Light Duty Yoke Puller
$74.99Part No: 49750CV
Light Duty Yoke Puller
$74.99- Used to remove automotive yokes on drive shafts and transmissions
- Reduces the risk of damaging yokes
- Made from high quality steel to provide reliable use for years
- Used on Ford® F150/F350, Chevrolet® 1500/3500, Dodge® RAM 1500/3500
UPC: 047084497500
Shipping Weight: .43lbsQuick View -
Light Bulb Pliers
$12.00Part No: 47CV
Light Bulb Pliers
$12.00Removing or installing small automotive bulbs should not be a hassle. They are fragile and easily broken. Sometimes it is hard to reach a bulb with just your fingers. The other concern could be corrosion. These pliers make it easy to handle small bulbs in any scenario, and the extended bulb grippers give you the ability to get into hard-to-reach areas.
•Fits most mini and small bulbs
•Rubber-coated tips designed to grip bulbs safely
•Extended reach for recessed, corroded, and broken bulbs
•Scissor design for easy handling
•Cushioned gripsApplications:
Mini and some small bulb sizesUPC: 047084000472
Shipping Weight: .7lbsQuick View -
LCD Test Light
$65.86Part No: 78
LCD Test Light
$65.86The LCD Test Light can be used for testing both power and ground voltage on 6v, 12v, 24v, and 48v DC circuits. Equipped with a coiled cord that can extend up to 12 ft.
- Backlit LCD display, lights red and green depending on test
- Stainless steel probe
- Long reach cord, up to 12ft
- For use on 6v, 12v, 24v, and 48v DC systems.
- Warning: For use with DC circuits only.
- Instructions:
- Test for Power
1) Connect lead to a good ground.
2) Touch probe to circuit terminal or wire.
3) LCD should light red and will display voltage in circuit. - Test for Ground
1) Connect lead to a good power supply.
2) Touch probe terminals, wires or chassis to locate ground.
3) LCD should light green and display voltage at good ground connection.
- Test for Power
UPC: 047084000786
Shipping Weight: .5lbsAlso available:
70 Heavy Duty Circuit Tester
81 Logic Light Circuit TesterQuick View -
Large and Small OFW Set
$84.29Part No: 29200
Large and Small OFW Set
$84.29Combination set of the 302 and 29200 oil filter wrenches:
- Part #302 – Adjustable Oil Filter Pliers: Self-adjusting, spring action (NOT a slip joint) oil filter pliers allow for a full range of filter applications. Heavy-duty, forged construction with textured grip add both strengthened leverage to the tool. Fits filters from 2-1/4″ to 6″ (57mm-152mm).
- Part #29900 – Truck & Tractor Oil Filter Pliers: Spring loaded adjustable pliers can easily adjust from 3-3/4″ to 7-1/2″. Heavy forged construction creates leverage for high torque applications. Can be used in one hand applications. 299-REPAIR kit is available.
UPC: 047084292006
Shipping weight: 4.95lbsQuick View -
Jumbo Oil Filter Pliers
$63.20Part No: 29900CV
Jumbo Oil Filter Pliers
$63.20- Spring loaded, adjustable pliers can easily adjust from 3-3/4″ to 7-1/2″
- Heavy-duty, forged construction creates leverage for high torque applications
- Features gripping teeth to easily remove stubborn spin-on oil filters
- Can be used in one hand applications
- 299-REPAIR kit available
UPC: 047084299005
Shipping weight: 3.15lbsQuick View -
Intermediate U-Joint Puller
$105.59Part No: 907CV
Intermediate U-Joint Puller
$105.59The ideal solution for disassembling seized, stubborn U-joints quickly and easily of virtually all cars, light-duty trucks and farm machinery. This piller eliminates dangerous vise-and-socket or hammering removal methods. It will allow the user to remove U-joints without damaging the driveshaft, yokes, joints or bearing cups. It also eliminates the possibility of injury using other unsafe methods. Applications for this tool include U-joints with bearing cups 1.25” to 1.7” O.D. Our pullers are made of high-grade materials to ensure durability and strength.
• For disassembling seized U-joints of virtually all truck, medium-duty trucks, buses, and farm equipment
• Applicable to bearing cups 1.25” – 1.7” outer diameter
• Each component is manufactured from high-grade materials for strength and durability
• Eliminates the needs to employ dangerous and less effective methods like hammer-and-vise with a higher potential of damaging componentsUPC: 047084009079
Shipping Weight: 5.5lbsQuick View -
Intermediate Pitman Arm Puller
$155.00Part No: 18640CV
Intermediate Pitman Arm Puller
$155.00Our intermediate pitman arm puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from the steering gear found on many medium-duty vehicles.
- Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
- Constructed of high-strength materials for increased pulling power and superior durability
- Rated for usage with up to a 1/2″ drive impact wrench
- Simple and effective design wide a wide application range
Applications: Heavy-duty pickups (1-ton and 2-ton), medium-duty trucks, box trucks, cab-and-chassis, and school buses
UPC: 047084186404
Shipping weight: 5.51lbs18640 Intermediate Pitman Arm Puller Flyer
Also available:
18620 Sheppard M100 Pitman Arm Puller
18630 Sheppard M110 Pitman Arm PullerQuick View -
Inner Tie Rod Removal Tool
$22.23Part No: 946
Inner Tie Rod Removal Tool
$22.23The Inner Tie Rod Removal Tool, is essential when working with applications when inner tie rods have round ends, but can also be used for rounded with flats, hex end versions and great for inner tie rod ends with damaged surfaces.
- Turns smooth tie rods easily.
- Simply slide tool over the end and tighten collar to allow access with an extension.
- Can remove Inner tie rod without removing the outer tie rod
- No more bulky tool to store.
- Inexpensive and effective way to turn these smooth tie rod ends.
UPC: 047084009468
Shipping weight: .75lbQuick View -
In-Line Dowel Pin Puller St, Metric
$160.00Part No: 95300
In-Line Dowel Pin Puller St, Metric
$160.00No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel.
- Simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm
UPC: 047084953006
Shipping Weight: 3.65lbs95200, In-Line Dowel Pin Puller Set, SAE
95400, In-Line Dowel Pin Puller Master Set (SAE and Metric combined)Quick View -
In-Line Dowel Pin Puller Set, SAE
$160.00Part No: 95200
In-Line Dowel Pin Puller Set, SAE
$160.00No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use outer sleeve and nut to extract the dowel.
- Simple and effective method for removing dowel pins
- Can be used with air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow molded case
- Patent pending
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
UPC: 047084952009
Shipping Weight: 3.65lbs95300, In-Line Dowel Pin Puller Metric, Metric
95400, In-Line Dowel Pin Puller Master Set95200 Dowel Pin Puller Instructions
Quick View -
In-Line Dowel Pin Puller Master Set
$250.00Part No: 95400
In-Line Dowel Pin Puller Master Set
$250.00No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.
- A simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Contains:
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mmUPC: 047084954003
Shipping Weight: 4.61lbs95200, In-Line Dowel Pin Puller Set, SAE Only
95300, In-Line Dowel Pin Puller Metric, Metric OnlyQuick View -
Ignition Point Files
$3.35Part No: 693
Ignition Point Files
$3.35- Quality, double-cut ignition files guaranteed to file tungsten and platinum contact points.
- Made of super hard, high-quality steel with Rockwell hardness of 65
UPC: 047084006931
Shipping weight: .05lbsQuick View
