Products
- You cannot add "Light Duty Slide Hammer and Puller Set, 14 Piece" to the cart because the product is out of stock.
Showing 49–60 of 310 results
-
Ford & Mazda Crankshaft Holder
$40.00Part No: 38100
Ford & Mazda Crankshaft Holder
$40.00A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt on many popular Ford and Mazda vehicles, or it can be used to turn the engine when doing timing work.
- Adapter securely fits the crankshaft tokeep it from rotating when loosening the pulley bolt
- The ½” drive tab allows for the use of a ratchet or breaker bar
- Ideal for timing-related jobs
- Heavy-duty construction and a rust resistant finish
Applications: Ford/Mazda 2005 2011 2.0L/2.3L/2.5L (including some Mercury and Volvo applications) (Hybrid models also)
Models: (Ford) Focus, Fusion, Escape, Ranger, Transit; (Mazda) MX 2,MX 3, MX 5, MX 6; CX 5, CX 9; (Mercury) Milan, MKZ, Mariner
Warranty: Lifetime Against Defects
Quick View -
Ford Harmonic Balancer Holder
$35.00Part No: 38110
Ford Harmonic Balancer Holder
$35.00A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford engines, or it can be used to turn the engine when doing timing work.
- Designed to fit multiple Ford vehicles ranging from 1992 to 2016
- The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
- The ½” drive knockout allows for the use of a ratchet or breaker bar
- Ideal for rotating the engine for timing-related jobs
- Will not warp balancer
- Heavy-duty construction
Quick View -
Snap Ring Pliers- Straight
$28.97Part No: 49CV
Snap Ring Pliers- Straight
$28.97Strong enough to remove U-joint snap rings with the precision for plastic clips
on interior and body panels, these pliers are available in both 75˚offset (48)
and straight design (49).FEATURES
- Designed for removing U-joint snap rings
- Great for removing interior clips and body panel fasteners
- 75˚ offset head (48) for use in confined areas
Quick View -
Snap Ring Pliers- 75˚ Offset
$31.08Part No: 48CV
Snap Ring Pliers- 75˚ Offset
$31.08Strong enough to remove U-joint snap rings with the precision for plastic clips
on interior and body panels, these pliers are available in both 75˚offset (48)
and straight design (49).FEATURES
- Designed for removing U-joint snap rings
- Great for removing interior clips and body panel fasteners
- 75˚ offset head (48) for use in confined areas
Quick View -
Adjustable Indexing Trim Clip Pliers
$55.00Part No: 54
Adjustable Indexing Trim Clip Pliers
$55.00FEATURES
- Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation
- Adjustable head design allows access to difficult or otherwise unreachable areas when trying to use other similar pliers
- Steel construction with a double-dipped textured, grip
Quick View -
Universal Torsion Bar Unloading Tool
$130.00Part No: 200
Universal Torsion Bar Unloading Tool
$130.00Use this tool to take the pressure off the torsion bar arm and allow for removal of the torsion bar on GM and non-GM vehicles
Durable blow-molded case included.
FEATURES
- Includes an adapter for using tool on non-GM applications
- Durable blow-molded case included
APPLICATIONS:
- 1988 and up GMC and Chevrolet 1/2-ton, 3/4-ton, and 1-ton trucks
- 2011 and up GM HD trucks, S-10 Blazers, S-15 Jimmys, and 4WD trucks with 4.3L engines
- GM K-3500 series with HD chassis, including GM 5-lug, 6-lug, and 8-lug vehicles
Quick View -
BEARING CUP INSTALLER
$105.33Part No: 20200
BEARING CUP INSTALLER
$105.33FEATURES
An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip.
- Install two bearing cups in one procedure on virtually all medium and light duty U-joints
- Manufactured from high-grade steel for strength and durability. Simple to use for instant results
Applications:
Light Duty to Medium Duty U joints.Parts Breakdown:
20201 C Frame
20202 Forcing Screw
20203 Flat Press Adapter
20204 O RingDimensions: 11.50″ x 1.85″ x 5.17″
Quick View -
Bolt Retained Cup Installer
$48.65Part No: 18510
Bolt Retained Cup Installer
$48.65Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6 8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.
• Easily and quickly installs the U joint bearing cups on series 1610 1880 yokes on class 6 8 vehicles
• Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
• Eliminates damage to cups, seals, or needle bearingsApplications:
1610 1880 Series full round yokes/Class 6 8 vehiclesComponents:
18511 Bolt Retained Body
18512 Center Screw
18513Guide Bolts (2)Quick View -
45° Universal Hose Clamp Pliers
$50.00Part No: 58
45° Universal Hose Clamp Pliers
$50.00There are times when removing a clamp is more difficult than it should be, and you shouldn’t need a handful of pliers until you find the right one. These hose clamps pliers cover nearly all the clamps with one tool and give better access than standard pliers.
– Angled head and extra-long reach to allow access to even some of the most obstructed clamps.
– Special tip designed to grip almost any hose clamp from any direction.
– Locking ratcheted jaws enable the user to keep pliers locked onto clamps.
– Great for coolant tank ventilation line clamps, radiator hose clamps, transmission cooler lines, and other applications.Quick View -
Ratcheting Harmonic Balance Puller
$88.00Part No: 38000
Ratcheting Harmonic Balance Puller
$88.00Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.
• Three ratcheting legs with puller feet eliminate the need for bolts
• No need to remove the radiator or other components with this compact design
• Legs quickly adjust and hold their position
• Push turn click design
• Dimensions: 3.7 6 ” x 4.8 2 ” x 3.6 5Applications:
FORD 5.0 Coyote
GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
MISC Most three and six spoke harmonic balancers/pulleysParts Breakdown:
38001
Ratcheting Yoke
38002
Forcing Screw
38003
Harmonic Jaws 3 Pcs.
38004 Flat Press Adaptor with O RingQuick View -
Light Duty Slide Hammer and Puller Set, 14 Piece
$90.00Part No: 49700
Light Duty Slide Hammer and Puller Set, 14 Piece
$90.00A versatile tool that can be used in many ways. The 2 lb slide hammer and an array of attachments can be utilized to aid in pulling seals, bearings, pressed studs, or even for straightening body panels.
- Slide hammer and accessories can be used in many applications
- Capable of inside spreads from 3/8″ to 1 ¼“ and outer spreads up to 3″
- Puller reaches depths up to 2 ½”All components are in a blow-molded case for easy storage and organization
Components:
49701 Slide Hammer
49702 Threaded Rod
49703 Screw Adapter
49704 Square Hook
49705 Jaw Adapter
49706 Two-Jaw Puller
49707 Hook Puller
49708 Locking Pins
49709 Cone Rod
49710 Small Jaws (2 pcs)
49711 Large Jaws (2 pcs)
49712 T-Handle
49713 Blow-Molded Storage CaseOut of stock
Quick View -
3 Piece Non-Marring Pick Set
$8.11Part No: 112
3 Piece Non-Marring Pick Set
$8.11While metal picks can be useful, they often cause accidental damage like scratching a soft surface. This pick set is a balance of strength and forgiveness.
•Access hard-to-reach areas such as panels, remove O-rings, clips, and small seals and gaskets
•Diverse usage ranging from engine work to interiors
•Ideal for intricate jobs and when working with delicate surfacesComponents:
112-1Small Non-Marring Pick
112-2Large Non-Marring Pick
112-3Straight Non-Marring Pick
Vinyl PouchQuick View