Pullers and Installers

Product categories

Showing 1–12 of 43 resultsSorted by price: high to low

Heavy Duty Yoke Puller
$357.14
Part No: 497CV
Heavy Duty Yoke Puller
$357.14
Simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions, and drive axles without damage to yokes or other components. Also, the caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks.
- Fits on multiple Spicer full and half round yokes
- Fits on Meritor (Rockwell) RPL 20 & 25 series
- Manufactured from high grade steel
- Removal on yokes with bearing diameters between 1-7/8″ – 2-3/16″
UPC: 047084004975
Shipping Weight: 12.75lbs

497 Parts Breakdown

497CV Instructions

497 HD Yoke Puller Flyer
Available on backorder

Heavy Duty Yoke Puller quantity
Quick View
In-Line Dowel Pin Puller Master Set
$274.73
Part No: 95400
In-Line Dowel Pin Puller Master Set
$274.73
No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.
- A simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Contains:
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm

UPC: 047084954003
Shipping Weight: 4.61lbs

95200, In-Line Dowel Pin Puller Set, SAE Only
95300, In-Line Dowel Pin Puller Metric, Metric Only

95400 In-Line Dowel Pin Puller Master Set Breakdown

95400 Dowel Pin Puller Instructions
In-Line Dowel Pin Puller Master Set quantity
Quick View
Blind Hole Puller Set
$219.78
Part No: 29CV
Blind Hole Puller Set
$219.78
- Designed for removing bearings from a recessed location, such as a pilot bearing.
- Set includes a 2-1/2 lbs. slide hammer with T-handle and four collets, for a wide range of applications with 3/8″– 1-1/4″ (10mm to 32mm) inner diameter holes
- Easy to operate. Choose the appropriate collet by application, insert the collet into the inner portion of the bearing, expand the collet, thread on the slide hammer to attach, and remove the bearing.
29 Blind Hole Puller Set Breakdown

Cal-Van 29 – Instruction Manual

29 Blind Hole Bearing Puller Flyer
Blind Hole Puller Set quantity
Quick View
Sheppard M110 Pitman Arm Puller
$219.77
Part No: 18630CV
Sheppard M110 Pitman Arm Puller
$219.77
Our M110 Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M110 steering gears found on many class 6 – 8 vehicles.
- Replaces less effective and often destructive methods to remove pitman arms
- Constructed of high-strength materials for increased pulling power
- Rated for usage with up to a 3/4″ drive impact for faster removal
- Applicable to highway transportation vehicles, RVs, buses, and equipment
UPC: 047084186305
Shipping weight: 11lbs

18630 – Sheppard M110 Pitman Arm Puller Instructions

18630 Sheppard M110 Pitman Arm Puller Flyer

Also available:
18620 Sheppard M100 Pitman Arm Puller
18640 Intermediate Pitman Arm Puller
Sheppard M110 Pitman Arm Puller quantity
Quick View
Ball Joint Removal & Installation Set
$213.07
Part No: 196
Ball Joint Removal & Installation Set
$213.07
The ball joint super set includes tools needed to remove and install press-fit parts such as ball joints, universal joints, and truck brake anchor pins. Impact rated.

Contains:
- 3 receiver tubes
  
  2- 3/4″ ID X 3″ OD
  
  2- 1/4″ ID x 2 1/2″ OD
  
  1- 3/4″ ID X 2″ OD
- Installation and removing adapters
  
  1 installing cup
  
  1 receiving cup
  
  1 installing adapter
UPC: 047084001967
Shipping Weight: 14.83lb

196 – Ball Joint Removal & Installation Set Breakdown

196 Ball Joint Super Set Flyer
Ball Joint Removal & Installation Set quantity
Quick View
Heavy-Duty U-Joint Puller
$195.60
Part No: 199CV
Heavy-Duty U-Joint Puller
$195.60
A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
- Manufactured from high-grade materials for strength and durability
- Engineered for use up to a 1″ Impact wrench
- Reduces damage to the driveshaft, yokes, joints or bearing cups
- Eliminates dangerous vice-and-socket or hammering removal methods
- Applications:
  
  U-Joints with bearing cups 1.5″ to 2.2″ O.D
  
  Spicer 1610, 1710, 1760, 1810, 1880 Series
  
  Spicer SPL 140, 170, & 250 Life Series
  
  Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
  
  Meritor RPL 20, 25 Permalube™ Series
UPC: 047084001998
Shipping Weight: 11.85lbs

199 Breakdown

199 Heavy-Duty U-Joint Puller Instructions

199 Heavy Duty U-Joint Puller Flyer
Available on backorder

Heavy-Duty U-Joint Puller quantity
Quick View
7-Ton Bar Type Puller Bearing Separator Set
$192.22
Part No: 501CV
7-Ton Bar Type Puller Bearing Separator Set
$192.22
This Puller/bearing separator set was created for difficult jobs. With the capacity for larger applications up to 7-tons, it also has a greater reach of 8 to 16 inches.
- Includes a Bearing Splitter with 4″ capacity, two sets of hex push puller legs, and an 8″ bar-type puller head mated with a custom thread forcing screw
- Professionals have a Puller-Bearing set for hard jobs up to 7-tons
- Larger applications and a greater reach 8″ to 16″
UPC: 047084005019
Shipping Weight: 17.05lbs

501 – Bearing Separator and Puller Set Breakdown

501 7-Ton Bearing Separator and Puller Set Flyer
7-Ton Bar Type Puller Bearing Separator Set quantity
Quick View
Heavy-Duty Bearing Cup Installer
$181.32
Part No: 20300CV
Heavy-Duty Bearing Cup Installer
$181.32
Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints. The press plate and specific adapters make proper installation easy every time while also reducing the risk of damage to the driveshaft, yokes, and joints.
- Three adapters to fit SPL 140, 170, 250 Series drivelines
- Use on quick disconnect universal joint only
- Safer alternative to makeshift methods
- Can be used with hand and air tools
- Great partner tool for Heavy Duty U-Joint Puller (Part No.199) and Heavy Duty Yoke Puller (Part No. 497)
- Applications:
  
  Dana®/Spicer® SPL 140, 170, and 250 Series U-joints found in class 6-8 commercial vehicles and equipment
UPC: 047084203002
Shipping weight: 12.5lbs

20300CV Heavy Duty Bearing Cup Installer Instructions

20300 Heavy Duty Bearing Cup Installer Replacement Parts

20300 Heavy Duty Bearing Cup Installer Flyer
Heavy-Duty Bearing Cup Installer quantity
Quick View
In-Line Dowel Pin Puller St, Metric
$175.82
Part No: 95300
In-Line Dowel Pin Puller St, Metric
$175.82
No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel.
- Simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm

UPC: 047084953006
Shipping Weight: 3.65lbs

95200, In-Line Dowel Pin Puller Set, SAE
95400, In-Line Dowel Pin Puller Master Set (SAE and Metric combined)

95300 – Metric Dowel Pin Puller Breakdown

95300 Dowel Pin Puller Instructions
In-Line Dowel Pin Puller St, Metric quantity
Quick View
In-Line Dowel Pin Puller Set, SAE
$175.82
Part No: 95200
In-Line Dowel Pin Puller Set, SAE
$175.82
No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use outer sleeve and nut to extract the dowel.
- Simple and effective method for removing dowel pins
- Can be used with air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow molded case
- Patent pending
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″

UPC: 047084952009
Shipping Weight: 3.65lbs

95300, In-Line Dowel Pin Puller Metric, Metric
95400, In-Line Dowel Pin Puller Master Set

95200 Breakdown

95200 Dowel Pin Puller Instructions
In-Line Dowel Pin Puller Set, SAE quantity
Quick View
Bearing Splitter, Large
$159.34
Part No: 511
Bearing Splitter, Large
$159.34
Designed to pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 4″ – 6″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- Universal application
- Max spread: 8.375″
UPC: 047084005118
Shipping weight: 12lbs

511 Large Bearing Splitter Breakdown

511 Large Bearing Splitter Flyer

Also available:

508 – Bearing Splitter, Small
509 – Bearing Splitter, Medium
Bearing Splitter, Large quantity
Quick View
9 Way Slide Hammer Puller Set
$159.34
Part No: 956
9 Way Slide Hammer Puller Set
$159.34
The 9 Way Slide Hammer Puller Set pulls flange-type rear axles and most front wheel drive hubs. The internal and external jaws provide a variety of combinations to pull bearings, seals and gears.
- Two and three-way cross blocks and cones provide the perfect jaw configuration for most jobs
- Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements
UPC: 047084009567
Shipping weight: 17.35lbs

956 9 Way Slide Hammer Puller Set Flyer

956 – 9-Way Slide Hammer Puller Set Replacement Parts
9 Way Slide Hammer Puller Set quantity
Quick View