CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Pullers and Installers

  • Light Duty Yoke Puller

    Light Duty Yoke Puller

    $82.41

    Part No: 49750CV

    Light Duty Yoke Puller

    $82.41
    • Used to remove automotive yokes on drive shafts and transmissions
    • Reduces the risk of damaging yokes
    • Made from high quality steel to provide reliable use for years
    • Used on Ford® F150/F350, Chevrolet® 1500/3500, Dodge® RAM 1500/3500

    UPC: 047084497500
    Shipping Weight: .43lbs

    49750 Breakdown

    49750 Light Duty Yoke Puller Flyer

    Available on backorder

    Quick View
  • Bolt Retained Cup Installer

    Bolt Retained Cup Installer

    $53.46

    Part No: 18510CV

    Bolt Retained Cup Installer

    $53.46

    Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6-8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.

    • Easily and quickly installs the U joint bearing cups on series 1610-1880 yokes on class 6-8 vehicles
    • Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
    • Eliminates damage to cups, seals, or needle bearings
    • Impact rated

    Applications: 1610-1880 Series full round yokes/Class 6-8 vehicles

    UPC: 047084185100
    Shipping weight: 1.5lbs

    18510 Instructions

    18510 Parts Breakdown

    18510 Bolt Retained Bearing Cup Installer Flyer

    Quick View
  • Rear Axle Bearing Puller Set

    Rear Axle Bearing Puller Set

    $93.41

    Part No: 91800CV

    Rear Axle Bearing Puller Set

    $93.41

    Designed to remove flange type, semi-floating rear axle bearings in most late model, rear-wheel drive cars and light-trucks.

    • Includes 3 bearing pullers with a range from 1″ –  2-7/8″
    • For flange-type, semi-floating bearings
    • Designed to capture rear axle bearings firmly
    • Comes in a blow-molded case

    UPC: 047084918005
    Shipping Weight: 2.9lbs

    91800 Parts Breakdown

    91800 Instructions

    Quick View
  • Blind Hole Puller Set

    Blind Hole Puller Set

    $219.78

    Part No: 29CV

    Blind Hole Puller Set

    $219.78
    • Designed for removing bearings from a recessed location, such as a pilot bearing.
    • Set includes a 2-1/2 lbs. slide hammer with T-handle and four collets, for a wide range of applications with 3/8″– 1-1/4″ (10mm to 32mm) inner diameter holes
    • Easy to operate. Choose the appropriate collet by application, insert the collet into the inner portion of the bearing, expand the collet, thread on the slide hammer to attach, and remove the bearing.

    29 Blind Hole Puller Set Breakdown

    Cal-Van 29 – Instruction Manual

    29 Blind Hole Bearing Puller Flyer

    Quick View
  • 5-1/2″ Adjustable Two-Jaw Puller, 7″ Spread

    5-1/2″ Adjustable Two-Jaw Puller, 7″ Spread

    $66.84

    Part No: 942

    5-1/2″ Adjustable Two-Jaw Puller, 7″ Spread

    $66.84

     

    • 5 ton
    • Designed with forged yokes, heat treated jaws, and plated for years of dependable use.
    • Center screws heat treated and finished in black oxide
    • 5-1/2″, 7″ spread, Adjustable, Center Screw 9/16″ – 20 x 6-3/8″

    UPC: 047084009420
    Shipping weight: 2.15lbs

    Quick View
  • 3-1/2″ Reversible Two-Jaw Puller, 6″ Spread

    3-1/2″ Reversible Two-Jaw Puller, 6″ Spread

    $63.11

    Part No: 941

    3-1/2″ Reversible Two-Jaw Puller, 6″ Spread

    $63.11
    • 5 Ton
    • Designed with forged yokes, heat treated jaws, and plated for years of dependable use.
    • Center screws heat treated and finished in black oxide.
    • 3-1/2”, 6” spread, Center Screw 9/16” – 20 x 6-3/8″

    UPC: 047084009413
    Shipping weight: 2.5lbs

    Also, available: 
    5-1/2″ Adjustable Two-Jaw Puller, 7″ Spread

    Quick View
  • BMW® AC Belt Installation Tool

    BMW® AC Belt Installation Tool

    $33.57

    Part No: 732

    BMW® AC Belt Installation Tool

    $33.57
    • Used for the installation of AC Belts on BMW® cars
    • Specifically crafted for BMW® years 2006 – 2010 & 2012 – 2015 vehicles.
    • Designed for use on BMW® V8 N62 Vehicles

    UPC: 047084007327
    Shipping weight: .2lb

    Quick View
  • Bearing Splitter, 4 1/4″ Capacity

    Bearing Splitter, 4 1/4″ Capacity

    $67.75

    Part No: 503

    Bearing Splitter, 4 1/4″ Capacity

    $67.75

    For removing generator gears, bearing cones, bearings, and similar parts that ordinary puller jaws cannot reach.

    • 4-1/4″ capacity
    • Knife edges are flush on one side for easy pulling
    • Bolts are heat treated for added strength

    UPC: 047084005033
    Shipping Weight: 1lb

    503 Large Bearing Splitter Breakdown

    503 Bearing Splitter Flyer

    Quick View
  • Ball Joint Removal & Installation Set

    Ball Joint Removal & Installation Set

    $213.07

    Part No: 196

    Ball Joint Removal & Installation Set

    $213.07

    Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.

    Contains:

    • 3 receiver tubes
      • 2- 3/4″ ID X 3″ OD
      • 2- 1/4″ ID x 2 1/2″ OD
      • 1- 3/4″ ID X 2″ OD
    • Installation and removing adapters
      • 1 installing cup
      • 1 receiving cup
      • 1 installing adapter

    UPC: 047084001967
    Shipping Weight: 14.83lb

    196 – Ball Joint Removal & Installation Set Breakdown

    196 Ball Joint Super Set Flyer

    Quick View