Shop
Showing 118–126 of 318 results
-
Brake Line Bending Tool
$25.82Part No: 76110CV
Brake Line Bending Tool
$25.82The 76110, Brake line bending tool, is designed to align, bend and adjust brake lines up to 3/6″/4.75MM in diameter. Comes with two 90 degree bending width options and a 6MM female hex slot for a secure hold while bending brake lines. Ergonomic design is suitable for one-handed operation.
- Design to bend brake lines with a 3/16″ – 4.75mm maximum diameter
- Fitted with a 15/64″ – 6mm hex slot for holding and bending brake lines
- Two 90 degree bending width options
- Coated with an anti-corrosion electrophoretic black paint
- Ergonomic design is suitable for one handed operation
- Compact features allows user to complete brake line bends in tight fitting applications
UPC: 047084761106
Shipping Weight: .35lbsAlso available:
75902 – Tube Bend Mirror AdaptersQuick View -
Brake Line Flaring Tool
$72.37Part No: 160CV
Brake Line Flaring Tool
$72.37The Pistol Grip Brake Flaring Tool is an adaptable tool to allow easy flaring. It can be used on the vehicle or in a vise by simply removing the handle.
- Pistol grip handle and lock on clamps to allow easy flaring
- Can be used on the vehicle or in a vise by simply removing the handle
- For use with steel, nickel and copper lines
- For making double and bubble flares on 3/16” and 4.75mm tubing
UPC: 047084001608
Shipping Weight: .85lbsQuick View -
Bushing Driver Set
$87.91Part No: 504
Bushing Driver Set
$87.91Remove or install bushings from 3/8″ to 1-3/8″ in diameter found in cars, trucks, tractors, construction equipment, electric motors, and many other components containing bushings.
- Includes sixteen bushing adapters ranging from 3/8″ – 1-3/8″, large, medium, and small driver handles.
- Comes in a blow molded storage case.
UPC: 047084005040
Shipping Weight: 3.1lbsQuick View -
Clutch Alignment Tool
$43.96Part No: 20CV
Clutch Alignment Tool
$43.96Used to align single disc clutches on most domestic and imported vehicles. Set contains 4 two-step SAE pilot bushings, 2 metric two-step pilot bushings, 1 center shaft, and a tapered alignment cone with a 1-1/8″ maximum diameter taper.
• Designed to align clutch plates and pilot bearings accurately
• Used to align single disc clutches on most domestic and imported vehicles
• Contains 4 SAE two-step pilot bushings, 4 metric two-step pilot bushings, a center shaft with knurled handle, and a tapered alignment cone for up to 1-1/8” diameters.UPC: 047084000205
Shipping Weight: 2.10lbs.Quick View -
Coil Spring Clamps
$97.24Part No: 91000
Coil Spring Clamps
$97.24- Three piece, heavy-duty tool allows for easy removal or installation, where removal of spring through the center is not possible.
- Set clamps in any position.
- Tool comes with three safety U-Bolts.
- Not for use with impact tools.
UPC: 047084910009
Shipping weight: 6.45lbsQuick View -
Coil Spring Compressor
$90.11Part No: 510
Coil Spring Compressor
$90.11This tool removes and installs coil springs quickly and safely
- Compress coil springs on all passenger cars and pick-up trucks
- Instructions included
- Not for use with impact tools
This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.
UPC: 047084005101
Shipping Weight: 3.25lbsQuick View -
Constant Tension Tube Cutter, 1/8″ – 1-1/8″
$49.45Part No: 158CV
Constant Tension Tube Cutter, 1/8″ – 1-1/8″
$49.45The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
- Cuts a range of tubing sizes from 1/8″ – 1-1/8″
- Spring loaded tube cutter
- Patented design
- Replaceable blade, part #157-600
UPC: 047084001585
Shipping Weight: .6lbs158 Constant Tension Tube Cutter Flyer
Also available:
157 Constant Tension Tube Cutter, 3/16″ – 7/8″
159 Mini-Mini Constant Tension Tube CutterQuick View -
Constant Tension Tube Cutter, 3/16″ – 7/8″
$30.77Part No: 157
Constant Tension Tube Cutter, 3/16″ – 7/8″
$30.77The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
- Cuts a range of tubing sizes from 3/16″ to 7/8″
- Spring loaded tube cutter
- Replaceable blade, part #157-600
- Patented design
UPC: 047084001578
Shipping Weight: .4lbs157 Constant Tension Tube Cutter Flyer
Also available:
158 Constant Pressure Tube Cutter 1/8″ – 1-1/8″
159 Mini-Mini Constant Tension Tube CutterQuick View -
Crank Bolt Socket Set
$98.90Part No: 980
Crank Bolt Socket Set
$98.90- Deep counter-weighted sockets to add more torque to break loose stubborn crank bolts specifically for Honda® and Toyota®. The set includes 17mm, 19mm, 21mm.
- Applications:
- Honda/Acura®, models: Accord, Civic, Pilot, CRV, Odyssey, CL TL Integra, MDX, vehicles
- Toyota/Lexus® models: Camry, Corolla, 4Runner, Sequoia, ES300, LS400 vehicles
- Any vehicle with a 17, 19, or 21mm crank bolt
UPC: 047084009802
Shipping weight: 6.25lbsQuick View
