Shop
Showing 28–36 of 319 results
-
22 PC Alternator Coupler Pulley (ADP) Kit
$130.00Part No: 750
22 PC Alternator Coupler Pulley (ADP) Kit
$130.00The 22 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.
- To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
- Will service vehicles included, but are not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler®, Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz® Opel®, Pontiac®, Peugeot®, Porsche®, Renault®, Saturn®, Seat®, Scion®, Toyota®, and VW®
- Eliminates the need to shop around for hard-to-find OWC and OAD tools
UPC: 047084007501
Shipping weight: 4.7lbsQuick View -
24″ Urethane Cut Out Knife
$26.53Part No: 17
24″ Urethane Cut Out Knife
$26.53- Composed of rigid aluminum that will not flex.
- Centered blade so tool can be used from either side.
- Flush securing screws prevent dash and molding damage.
UPC: 047084000175
Shipping Weight: .75lbsQuick View -
25 PC Multi Spline Screw Extractor Set
$74.99Part No: 44200CV
25 PC Multi Spline Screw Extractor Set
$74.99- Ideal set to remove broken screws, bolts, nuts, fittings, threaded rods
- Chamfered bit ensures a smooth fit into damaged fasteners
- High-density spiral design to remove fasteners quickly
- Professional grade, hardened Chrome Molybdenum steel
- Can be used with power and hand tools
UPC: 047084442005
Shipping weight: 4.07lbsQuick View -
3 PC Drive Adapters Set
$19.54Part No: 487
3 PC Drive Adapters Set
$19.54- Set of drive adapters that step
- Available in a set or individually
- Part 487-1: 1/4″F x 3/8”M
- Part 487-2: 3/8”F x 1/2″M
- Part 487-3: 1/2″F x 3/4″M
UPC: 047084004876
Shipping Weight: .64lbsQuick View -
3 PC XL Trim and Panel Clip Lifter Tool Set
$53.74Part No: 114CV
3 PC XL Trim and Panel Clip Lifter Tool Set
$53.74It is often more difficult than it should be working with clips and fasteners. It is a job that rewards using the right tool. The 3PC XL Trim and Panel Clip Tool Set is a heavy duty trim and clip remover designed for the most stubborn and hard to reach clips. Hardened steel with high polish chrome finish gives the set durability over the competition. The rubber grip allows the user keep positive grip on tool in a shop environment. Each tool in this kit has a unique offset and uses one of two different spreads, making sure you have the tool that works best.
- Great for removing plastic fasteners, clips, and retainers when working with interior and body panels
- Three offsets with two spreads (5mm and 11mm)
- Hardened steel with high polish chrome finish and rubberized handles for better feel and grip
- Eva foam tray included
UPC: 047084001141
Shipping Weight: 3lbsAlso available:
113 – 5 PC Trim and Panel Clip Tool SetQuick View -
3 Piece Non-Marring Pick Set
$8.11Part No: 112CV
3 Piece Non-Marring Pick Set
$8.11While metal picks can be useful, they often cause accidental damage like scratching a soft surface. This pick set is a balance of strength and forgiveness.
- Access hard-to-reach areas such as panels, remove O-rings, clips, and small seals and gaskets
- Diverse usage ranging from engine work to interiors
- Ideal for intricate jobs and when working with delicate surfaces
- Stored in a vinyl pouch
Components:
112-1 Small Non-Marring Pick
112-2 Large Non-Marring Hook Pick
112-3 Straight Non-Marring PickUPC: 047084001127
Shipping Weight: .1lbsQuick View -
3 Pin Adjustable Brake Caliper Turn Back Tool
$29.00Part No: 726
3 Pin Adjustable Brake Caliper Turn Back Tool
$29.00This adapter allows you to rewind the pistons in brake calipers, and works by allowing the rotation of the piston at the same time as pushing the piston back into the caliper.
- Replaces larger kits containing up to 20 parts
- Rotates brake pistons back into the caliper on vehicles with self-adjusting parking breaks
- Use with a 3/8″ drive ratchet or breaker bar
- Fits most domestic and import vehicles
- Applications include: Alfa Romeo®, Audi®, Citroen®, Ford®, Honda®, Jaguar®, Land Rover®, Mazda®, Mercedes®, Mini®, Mitsubishi®, Nissan®, Lancer®, Toyota®, VW®, Volvo®
- 726 – 3 Pin Brake Rewind Tool
- Min: .75”
- Max: 1.6”
UPC: 047084007266
Shipping weight: .15lbAlso available:
723 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool
724 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool Set
725 – 2 Pin Adjustable Brake Caliper Turn Back ToolQuick View -
3 Valve Replacement Insert
$15.80Part No: 393-100
3 Valve Replacement Insert
$15.80Replacement insert for the 3 Valve Ford® Triton Engine kit, part 39300.
- 16mm x 1.5
- 3/4″-16 OD
- Works with 2004-2008 Three Valve Ford® Triton Engines
- Sold individually
- Steel alloy insert with black oxide finish
UPC: 047084393109
Shipping Weight: .05lbsQuick View -
3-1/2″ Reversible Two-Jaw Puller, 6″ Spread
$57.43Part No: 941
3-1/2″ Reversible Two-Jaw Puller, 6″ Spread
$57.43- 5 Ton
- Designed with forged yokes, heat treated jaws, and plated for years of dependable use.
- Center screws heat treated and finished in black oxide.
- 3-1/2”, 6” spread, Center Screw 9/16” – 20 x 6-3/8″
UPC: 047084009413
Shipping weight: 2.5lbsAlso, available:
5-1/2″ Adjustable Two-Jaw Puller, 7″ SpreadQuick View
