CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

  • Ford® & Mazda® Engine Valve Timing Kit

    Ford® & Mazda® Engine Valve Timing Kit

    $53.15

    Part No: 38300

    Ford® & Mazda® Engine Valve Timing Kit

    $53.15

    This easy alignment tool takes place of pins needed in similar tools. Pins can be hard to access and add time to job in cases where other components are needed. This also eliminates the user error with pins that can lead to pins being bent and stuck.

    • For servicing the timing belt chains, head gaskets, or other valve train repairs on Ford®, Mercury®, and Mazda vehicles
    • Applications: 2.0L DOHC Zetec engines found in 1994-2003 Ford® and Mercury® vehicles and 2004-2012 2.5L DOHC, 2.3L DOHC 4V, and 2.0L DOHC engines that are found in Ford®, Mercury®, and Mazda® vehicles
    • Easy alignment tool is screwed into sparkplug hole and turned by wrench to align cams.
    • Tool positions number 1 cylinder to top dead center by holding number 2 or 3 cylinder to bottom dead center

    UPC: 047084383001
    Shipping weight: 1.45lbs

    38300 Camshaft Alignment Tool Instructions

    38300 Ford & Mazda Camshaft Alignment Kit Breakdown

    38300 Ford & Mazda Camshaft Alignment Tool Flyer

    Quick View
  • Ford® EcoBoost Long Reach Harmonic Balancer Installer

    Ford® EcoBoost Long Reach Harmonic Balancer Installer

    $53.15

    Part No: 38710CV

    Ford® EcoBoost Long Reach Harmonic Balancer Installer

    $53.15

    The Ford® EcoBoost™ Long Reach Balancer Installer was designed to achieve easy installation of harmonic balancers of Ford® EcoBoost and various other Ford®/Lincoln® engines from 2011 – 2018. This tool is perfect for hard to access areas, especially on FWD vehicles. The highlight of this tool, besides the ease of use, is the nut and bearing sleeve. This assembly reduces friction, ensuring proper fit during installation. Included spacer to fit into pulleys and limit interference. Can be used on 2.7L, 3.0L, 3.3L, 3.5L and even 5.0L engines in Ford/Lincoln cars, trucks, and SUVs.

    • Easily install the harmonic balancer on to the crankshaft of multiple Ford® Ecoboost® engines
    • Nut and bearing sleeve assembly reduces friction while ensuring a proper fit
    • Accesses hard to reach areas
    • Upper threads: M14x1.5. Lower threads: M12x1.5

    Applications:

    • Ford® Edge equipped with 2.7L EcoBoost (238kW/324PS) model years 2015, 2016, 2017, and 2018.
    • Ford® F-150 equipped with 2.7L EcoBoost (238kW/324PS) or 5.0L 32V Ti-VCT model years 2015, 2016, 2017, and 2018.
    • Ford® F-150 equipped with 3.3L Duratec – V6 model year 2018.
    • Ford® F-150 and Mustang equipped with 5.0L (4V) model years 2011, 2012, 2013, and 2014.
    • Ford® Fusion equipped with 2.7L EcoBoost (238kW/324PS) model years 2017 and 2018.
    • Ford® Mustang equipped with 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS) or 5.2L 32V Ti-VCT model years 2015, 2016, 2017, and 2018.
    • Lincoln® Continental equipped with 2.7L EcoBoost (238kW/324PS) or 3.0L EcoBoost model years 2017 and 2018.
    • Lincoln® MKX equipped with 2.7L EcoBoost (238kW/324PS) model years 2016, 2017, and 2018.
    • Lincoln® MKZ equipped with 3.0L EcoBoost model years 2017 and 2018.

    UPC: 047084387108
    Shipping weight: 1.25lbs

    38710 Ford EcoBoost Balancer Installer Breakdown

    38710 Ford EcoBoost Balancer Installer Flyer

    Also available:
    38500 – Master Harmonic Balancer & Pulley Installer
    38700 – Long Reach Harmonic Balancer and Pulley Installer
    38800 – Harmonic Balancer Installer

    Quick View
  • 5 PC Trim and Panel Clip Tool Set

    5 PC Trim and Panel Clip Tool Set

    $53.15

    Part No: 113CV

    5 PC Trim and Panel Clip Tool Set

    $53.15

    Too many times we use the wrong tool for the job, making things worse. When it comes to clips and fasteners, this is almost always the case. This set has the rights tools. Each one is designed for maximum leverage and with varying spreads to make removing almost any clip, fastener, or panels easier than ever before. They have ergonomic, cushioned grips for comfort and chrome finished to last.

    • Ideal tool set for removing plastic fasteners, plastic clips, upholstery, or door panels
    • Five different offsets with a range of three spreads (5mm, 7.5mm, and 11mm)
    • High-polish chrome finish and rubberized handles for additional grip
    • Includes a foam organization tray

    UPC: 047084001134
    Shipping Weight: 1.44lbs

    113 – 5 PC Trim and Panel Clip Tool Set Breakdown

    113 5PC Clip Lifter Set Flyer

    Also available:
    114 – 3 PC XL Trim and Panel Clip Lifter Tool Set

    Quick View
  • Brake Fluid Tester (DOT 4 only)

    Brake Fluid Tester (DOT 4 only)

    $53.26

    Part No: 62CV

    Brake Fluid Tester (DOT 4 only)

    $53.26

    This tester can be used as a digital brake fluid tester, suitable for determining brake fluid quality.

    • Used to quickly and accurately gauge moisture content of DOT 4 brake fluid
    • Fluid quality is indicated on an easy to read LED gauge
    • For professional use in automotive repair and maintenance

    UPC: 047084000625
    Shipping Weight: .6lbs

    62 Brake Fluid Tester Flyer

    Quick View
  • Bolt Retained Cup Installer

    Bolt Retained Cup Installer

    $53.46

    Part No: 18510CV

    Bolt Retained Cup Installer

    $53.46

    Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6-8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.

    • Easily and quickly installs the U joint bearing cups on series 1610-1880 yokes on class 6-8 vehicles
    • Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
    • Eliminates damage to cups, seals, or needle bearings
    • Impact rated

    Applications: 1610-1880 Series full round yokes/Class 6-8 vehicles

    UPC: 047084185100
    Shipping weight: 1.5lbs

    18510 Instructions

    18510 Parts Breakdown

    18510 Bolt Retained Bearing Cup Installer Flyer

    Quick View
  • Fuel Line Pliers

    Fuel Line Pliers

    $53.73

    Part No: 689

    Fuel Line Pliers

    $53.73

    These pliers are designed for quick connect, slide and lock couplers found on fuel lines on a variety of European and Domestic vehicles.

    • Applications include Audi®, GM®, Mercedes® including M- class, Toyota® and VW® models
    • Also can pull fuel and vacuum hoses on Mercedes®

    UPC: 047084006894
    Shipping weight: .7lbs

    689 Fuel Line Pliers Flyer

    Quick View
  • 1/2″ DR. 12 Pin Rear Axle Hub Nut Socket

    1/2″ DR. 12 Pin Rear Axle Hub Nut Socket

    $53.84

    Part No: 83970CV

    1/2″ DR. 12 Pin Rear Axle Hub Nut Socket

    $53.84

    The 1/2″ DR. 12 pin rear axle hub nut socket, is designed to remove and install rear spindle hub nuts on 2019 – current Dodge® Ram 3500 Dual rear wheel drive trucks, 4500 and 5500 chassis cab trucks.

    • Remove and install rear axle retaining nuts on Dodge® Ram H.D. trucks
    • Fits Rear Hubs on Ram 2019 and up 3500 dual rear wheel trucks, 4500, 5500 (D2, DD, DP) chassis cab trucks
    • 1/2″ Female drive use with ratchets, breaker bars and torque wrenches
    • Replaces factory OEM Tool #2066600030
    • Not for use with an impact tool

    UPC: 047084839706
    Shipping weight: 2.01lbs

    83970 Dodge 12-Pin Rear Axle Hub Nut Socket Flyer

    Quick View
  • Exhaust Tail Pipe Cutter

    Exhaust Tail Pipe Cutter

    $53.85

    Part No: 764

    Exhaust Tail Pipe Cutter

    $53.85

    The exhaust tail pipe cutter is comprised of thirteen, large diameter (19mm) cutting wheels that cut deep into exhaust pipes.

    • Will not leave burrs.
    • Ideal for heavier-walled European-type exhaust pipes.
    • Cuts pipe from 3/4″ to 3-1/4″ (19mm – 83mm) in diameter.
    • Only 1/4″ turn needed to cut.
    • Works well in hard to reach places.

    UPC: 047084007648
    Shipping weight: 1.2lbs

    764 Exhaust Tail Pipe Cutter Flyer

    Quick View
  • Hub Tool

    Hub Tool

    $53.85

    Part No: 90100

    Hub Tool

    $53.85

    This tool is designed for removing the hub assembly from Ford® 4-Wheel Drive Pickup Trucks when replacing ball joints without causing damage to the wheel bearings.

    • Enables the technician to drive wheel bearings out from the back of the hub assembly by threading the tool over the hub assembly stud.
    • The tool has threads that match those of the four 1/2″ hub assembly studs.
    • Includes adapter for Dodge® applications.
    • Patent pending.

    UPC: 047084901007
    Shipping weight: 1.35lbs

    90100 Hub Tool Breakdown

    90100 Hub Tool Flyer

    Quick View
  • New!3 PC Heavy-Duty Tie Rod End Remover Set

    3 PC Heavy-Duty Tie Rod End Remover Set

    $54.00

    Part No: 18200CV

    3 PC Heavy-Duty Tie Rod End Remover Set

    $54.00

    The 3PC Heavy-Duty Tie Rod End Remover Set comes with the three most popular tie rod end sizes commonly found on class 3-8 trucks and equipment. Designed to provide the safest method to remove tie rods without risk of damage to threaded areas, rubber seals and grease nipples.

    • Safest method to loosen tie rod ends without risk of thread damage
    • Set includes most popular sizes:
      • 7/8″-14
      • 3/4″-16
      • M20 x 1.5
    • Manganese Phosphate coating resists corrosion
    • Tie rods commonly found on class 3-8 trucks and equipment

    UPC: 047084182002
    Shipping weight: 2.25lbs

    18200CV 3PC HD Tie Rod End Remover Flyer

    Available on backorder

    Quick View
  • Ripple Quick Tester

    Ripple Quick Tester

    $54.95

    Part No: 73

    Ripple Quick Tester

    $54.95

    In many vehicles, the alternator is in a difficult to access location, making direct testing methods problematic. The Quick Ripple Tester is designed to easily and efficiently test alternators for a variety of issues, including excessive ripple, through the DC outlet cigarette lighter.

    • Allows the user to test an alternator for bad diodes, bad stators, and intermittent diodes or stators without ever lifting the hood.
    • Simply plug the tester into the vehicles DC port and the tester will give results in a series of LED flashes to pinpoint exact problem.
    • Cuts alternator diagnostic time drastically.
    • Patent Pending

    UPC: 047084000731
    Shipping Weight: .25lbs

    73 Ripple Quik Tester Flyer

    Quick View
  • 11 PC Trim Tool Kit

    11 PC Trim Tool Kit

    $54.95

    Part No: 118CV

    11 PC Trim Tool Kit

    $54.95

    The 11 Piece Trim Tool Set includes 11 specialty tools made of durable, impact-resistant nylon designed to remove trim strips, panels, wheel caps, bezels, liners, shrouds, fascia, etc.

    • Constructed of durable, impact-resistant nylon that will not damage non-metal interior trim surfaces.
    • Cloth pouch rests flat on a dashboard or fender for easy access to tools and then folds up with tools inside for storage.
    • Multiple applications

    UPC: 047084001189
    Shipped Weight: 1.4lbs

    118 – Eleven Piece Trim Tool Kit Breakdown

    118 11 PC Trim Fastener Molding Remover Set Flyer

    Also available:
    117 – 5 PC Trim Fastener & Molding Remover Set

    Quick View