CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

  • Body Dent & Seal Puller

    Body Dent & Seal Puller

    $40.78

    Part No: 49500

    Body Dent & Seal Puller

    $40.78

    Tool used to pull dented sheet metal back into position.

    • Equipped with a 2-1/2 lb slide hammer
    • 13″ long shaft enables high pulling force

    UPC: 047084495001
    Shipping weight: 3lbs

    Available on backorder

    Quick View
  • Magnetic Spray Can Holder

    Magnetic Spray Can Holder

    $41.10

    Part No: 90943CV

    Magnetic Spray Can Holder

    $41.10

    The magnetic spray can and screwdriver toolbox shelf tray, comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds 3 spray cans and 7 various sized screwdrivers and a holding weight capacity of 20.7LBS. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • 3 spray can holder tray with 7 various sized screwdriver holes ranging from 0.28″-0.46″
    • 20.7LBS Weight Capacity

    UPC: 047084909430
    Shipping weight: 2.75lbs
    • Spray Can diameter is 2.97″

    Quick View
  • Magnetic Paper Towel Holder

    Magnetic Paper Towel Holder

    $41.10

    Part No: 90944CV

    Magnetic Paper Towel Holder

    $41.10

    This pair of magnetic paper towel holders is perfect for mechanics and comes with heavy duty, non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds a common sized roll of paper towel, roll of shop towels by any work area, with a 9.47lbs holding weight capacity. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • Paper Towel holder will adjust any any length roll
    • 9.47LBS Weight Capacity

    UPC: 047084909447
    Shipping weight: 1.75lbs

    Quick View
  • Magnetic Glove Box Holder

    Magnetic Glove Box Holder

    $41.10

    Part No: 90945CV

    Magnetic Glove Box Holder

    $41.10

    The magnetic glovebox holding tray helps you to keep glove boxes neat and where you need them the most. Comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds 3 spray cans and 7 various sized screwdrivers and a holding weight capacity of 9.47LBS. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • Adjustable side springs to hold glove boxes in place
    • 9.47LBS Weight Capacity

    UPC: 047084909454
    Shipping weight: 2.4lbs

    Quick View
  • 12 PC Master Back Probe Set

    12 PC Master Back Probe Set

    $41.62

    Part No: 61500CV

    12 PC Master Back Probe Set

    $41.62

    The 12PC Electrical back probe set allows easy access to electrical circuits from the back side of connectors. Designed for repair diagnostic troubleshooting, automotive testing, voltage and amperage testing while connector is plugged in. Includes two new flexible back probes that can be bent or angled in all positions without damaging the soft pvc sleeve and a 30 volt testing capacity. Set also includes two curved back probes with a 25 volt or 10 AMP test rating. All back probes are compatible with a standard 4MM plug and come with a 1 year warranty.

    • Allows easy access to electrical circuits from the back side of connectors
    • Compatible with standard 4MM plugs
    • Easy access to check voltage or amperage while connector is plugged in
    • New and improved flexible backprobes for testing up to 30 volts
    • 2 curved back probes with 25 volt or 10 AMP rating
    • 4MM standard banana male plugs

    UPC: 047084615003
    Shipping weight: .26lbs

    61500 12 PC Back Probe Master Set Flyer

    Also available:
    611 – 17 PC Electrical Back Probe Kit
    613 – 20 PC Electrical Back Probe Kit

    Quick View
  • Hose Clamp Pliers

    Hose Clamp Pliers

    $41.87

    Part No: 59CV

    Hose Clamp Pliers

    $41.87
    • Special tip designed to grip almost any hose clamp from any direction
    • Locking, ratcheted jaws enable user to keep pliers locked onto clamps
    • Extra-long reach, 11″ overall length
    • Great for coolant tank ventilation line clamps, radiator hose clamps, transmission cooler lines and other applications
    • Repair Kit: Part #58-2 includes thumb screw, spring, and lever.

    UPC: 047084000595
    Shipping Weight: 1.02lbs

    59 Hose Clamp Pliers Flyer

    Quick View
  • SAE In-Line Flaring Tool

    SAE In-Line Flaring Tool

    $42.00

    Part No: 164

    SAE In-Line Flaring Tool

    $42.00

    The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping, keeps flares centered, and makes the job of flaring easier. Superior to bar type flaring tools.

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • Will do 3/16″, 1/4″ and 5/16″ flares
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE (164), Metric (154) and Auto-Specific Set (161)
    • Patent Pending

    UPC: 047084001646
    Shipping Weight: 1.5lbs

    164 – In Line Flaring Instructions

    Quick View
  • Stud Removal and Installation Kit- SAE

    Stud Removal and Installation Kit- SAE

    $42.00

    Part No: 95600CV

    Stud Removal and Installation Kit- SAE

    $42.00

    Using make-shift methods to remove and install studs is often ineffective and has a higher possibility to causing damage to the studs, meaning more work. This set is specifically designed to make it easier to do it the right way every time.

    SAE version includes five installers and five removers in multiple sizes.

    • Specifically designed to make stud removal and installation easier
    • Eliminates the potential for damage to studs other methods often cause
    • Contains common thread sizes

    SAE thread sizes:5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14

    UPC: 047084956007
    Shipping Weight: 2lbs

    95600 Instructions

    95600 Stud Removal and Installation Kit Flyer

    Quick View
  • Seal Puller

    Seal Puller

    $42.69

    Part No: 49600

    Seal Puller

    $42.69

    This heavy duty seal puller removes metal or rubber, full lip seals.

    • Recessed cone adapter to hold screw
    • Locks screw into place enabling shaft to turn by handle to force screw through seal
    • 17-in. long shaft enables high pulling force

    UPC: 047084496008
    Shipping weight: 2.95lbs

    Available on backorder

    Quick View
  • Fuel Pump Locking Ring Tool

    Fuel Pump Locking Ring Tool

    $43.95

    Part No: 25310CV

    Fuel Pump Locking Ring Tool

    $43.95

    The Fuel Pump Lock Ring Tool is designed to quickly remove and install fuel tank lock rings when servicing fuel pump or fuel sending unit replacement. Universal design fits to any 7.25″ O.D. metal or plastic lock rings found on Ford®, Chrysler® and GM® vehicles.

    • Unique design fits on multiple makes and models of fuel tank lock rings
    • Easily removes and installs fuel tank lock rings when servicing fuel pump or fuel sending unit
    • Allow for greater clearance on the top of fuel sending units than other versions
    • Easily attach 1/2″ drive ratchet or breaker bar
    • Professional grade steel with black oxide finish to resist rust and corrosion
    • Applications (not limited) :
      • Dodge® Ram 1500 2500 3500 4500
      • Dodge® Charger Dodge Challenger SXT
      • Chevy® Silverado Malibu, Maxx, Colorado, Avalanche, Trailblazer, Camaro SS
      • 2005 Mercury® Montego
      • 2005-2006 Pontiac® Bonneville & G6
      • 2006 Chrysler® 300c
      • 2011 Kia® Sorento
      • Jeep® Wrangler, TJ Jeep, Compass
      • Ford® Explorer, Ford F-150, Ford Ranger
      • Mercury® Mariner

    UPC: 047084253106
    Shipping Weight: 1.15lbs

     

    Quick View
  • Flange Type Axle & Front Wheel Hub Puller

    Flange Type Axle & Front Wheel Hub Puller

    $44.26

    Part No: 526

    Flange Type Axle & Front Wheel Hub Puller

    $44.26
    • For use on domestic and import cars and light trucks.
    • Range is 3-3/4″ – 4-1/2″.
    • For use on 4, 5, or 6 bolt stud design and all non-C Lock GM axles.

    UPC: 047084005262
    Shipping Weight: 2.95lbs

    Quick View
  • 8″ Angled Electrician Scissors

    8″ Angled Electrician Scissors

    $44.50

    Part No: 55206CV

    8″ Angled Electrician Scissors

    $44.50

    The 55206 8″ Angled Electrician Scissors, are professional-grade electrician’s scissors that provide fit, form and function for any automotive electrical job. Allows user to easily cut through wire, cables, ties, tape and loom.

    • High Hardness, precision blades
    • Cuts up to 10AWG aluminum/copper wire
    • Also cuts cable ties, tape and wire looms
    • Integrated cable cutter, cuts soft cable up to 000 (3/0) AWG
    • Full Tang, stainless steel frame with anti-slip handles
    • Built in stripper and crimper
    • Angled handle design provides long reach and superior leverage
    • Built in spring and safety lock feature
    • Plastic Sheath with belt clip for safe storage

    UPC: 047084552063
    Shipping weight: .75lbs

    55206 8 Angled Electrician Scissors Flyer

    Also available:
    55200 – 6.25″ Electrician Scissors
    55203 – 6.75″ Multi-Grip Electrical Scissors

    Quick View