Products
Showing 73–84 of 318 resultsSorted by popularity
-
Heavy-Duty Truck Oil Filter Wrench 5-5/32″ to 5-21/32″
$32.00Part No: 893
Heavy-Duty Truck Oil Filter Wrench 5-5/32″ to 5-21/32″
$32.00- Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
- Use with 1/2″ square drive tool.
- Fit fits filters 5-5/32″ to 5-21/32″ (130mm-143mm) in diameter
UPC: 047084008935
Shipping weight: 1.15lbAlso available:
Quick View -
Bushing Driver Set
$80.00Part No: 504
Bushing Driver Set
$80.00Remove or install bushings from 3/8″ to 1-3/8″ in diameter found in cars, trucks, tractors, construction equipment, electric motors, and many other components containing bushings.
- Includes sixteen bushing adapters ranging from 3/8″ – 1-3/8″ large, medium, and small driver handles.
- Comes in a blow-molded storage case.
UPC: 047084005040
Shipping Weight: 3.1lbsQuick View -
7-Ton Bar Type Puller Bearing Separator Set
$174.92Part No: 501CV
7-Ton Bar Type Puller Bearing Separator Set
$174.92- Includes a Bearing Splitter with 4″ capacity, two sets of hex push puller legs, and a 8″ bar type puller head mated with a custom thread forcing screw
- Professionals have a Puller-Bearing set for hard jobs up to 7-tons
- Larger applications and a greater reach 8″ to 16″
UPC: 047084005019
Shipping Weight: 17.05lbsQuick View -
Constant Tension Tube Cutter, 3/16″ – 7/8″
$28.00Part No: 157
Constant Tension Tube Cutter, 3/16″ – 7/8″
$28.00The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
- Cuts a range of tubing sizes from 3/16″ to 7/8″
- Spring loaded tube cutter
- Replaceable blade, part #157-600
- Patented design
UPC: 047084001578
Shipping Weight: .4lbs157 Constant Tension Tube Cutter Flyer
Also available:
158 Constant Pressure Tube Cutter 1/8″ – 1-1/8″
159 Mini-Mini Constant Tension Tube CutterQuick View -
Automotive Bubble Flare Kit
$30.00Part No: 155
Automotive Bubble Flare Kit
$30.00The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.
- In-Line 4.75mm Bubble Faring Tool Kit
- Makes Bubble flares on 4.75mm soft steel or copper tubing
- Inline design for factory quality flares and tight access applications
- Bars directly clamp over tubing for no push through
- Clamp and hex sleeve work together to ensure perfectly symmetrical flares
- Patent pending
UPC: 047084001554
Shipping Weight: .7lbsAlso available:
154 Metric In-Line Flaring Tool
156 Metric In-Line Bubble Flaring Kit
161 Automotive In-Line Flaring Tool
164 SAE In-Line Flaring Tool
165 Master In-Line Flaring SetQuick View -
1/2″ DR. 12 Pin Rear Axle Hub Nut Socket
$48.99Part No: 83970CV
1/2″ DR. 12 Pin Rear Axle Hub Nut Socket
$48.99The 1/2″ DR. 12 pin rear axle hub nut socket, is designed to remove and install rear spindle hub nuts on 2019 – current Dodge® Ram 3500 Dual rear wheel drive trucks, 4500 and 5500 chassis cab trucks.
- Remove and install rear axle retaining nuts on Dodge® Ram H.D. trucks
- Fits Rear Hubs on Ram 2019 and up 3500 dual rear wheel trucks, 4500, 5500 (D2, DD, DP) chassis cab trucks
- 1/2″ Female drive use with ratchets, breaker bars and torque wrenches
- Replaces factory OEM Tool #2066600030
- Not for use with an impact tool
UPC: 047084839706
Shipping weight: 2.01lbsQuick View -
Heavy Duty Yoke Puller
$325.00Part No: 497CV
Heavy Duty Yoke Puller
$325.00Simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions, and drive axles without damage to yokes or other components. Also, the caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks.
- Fits on multiple Spicer full and half round yokes
- Fits on Meritor (Rockwell) RPL 20 & 25 series
- Manufactured from high grade steel
- Removal on yokes with bearing diameters between 1-7/8″ – 2-3/16″
UPC: 047084004975
Shipping Weight: 12.75lbsQuick View -
Clutch Alignment Tool
$40.00Part No: 20CV
Clutch Alignment Tool
$40.00Used to align single disc clutches on most domestic and imported vehicles. Set contains 4 two-step SAE pilot bushings, 2 metric two-step pilot bushings, 1 center shaft, and a tapered alignment cone with a 1-1/8″ maximum diameter taper.
• Designed to align clutch plates and pilot bearings accurately
• Used to align single disc clutches on most domestic and imported vehicles
• Contains 4 SAE two-step pilot bushings, 4 metric two-step pilot bushings, a center shaft with knurled handle, and a tapered alignment cone for up to 1-1/8” diameters.UPC: 047084000205
Shipping Weight: 2.10lbs.Quick View -
Quick Change Wheel Stud Cleaner Kit
$59.00Part No: 16CV
Quick Change Wheel Stud Cleaner Kit
$59.00This kit is designed to quickly and easily clean debris and rust from vehicle wheel studs..
- Comes with a ½” Dr adapter and 6 brushes.
- Brush sizes include 12 mm (7/16”), 13 mm (1/2”), 14 mm (9/16”), 16 mm (5/8”), 22 mm (1/18”) and 28 mm (7/8”).
- Brushes are quick and easy to change to fit the user’s needs.
- Designed to be used with a cordless drill.
UPC: 47084000168
Shipping Weight: 1.6lbsQuick View -
Seal Puller
$42.69Part No: 49600
Seal Puller
$42.69This heavy duty seal puller removes metal or rubber, full lip seals.
- Recessed cone adapter to hold screw
- Locks screw into place enabling shaft to turn by handle to force screw through seal
- 17-in. long shaft enables high pulling force
UPC: 047084496008
Shipping weight: 2.95lbsAvailable on backorder
Quick View -
Swivel Oil Filter Wrench
$7.85Part No: 994 (243-1)
Swivel Oil Filter Wrench
$7.85- Tool features a swivel handle which allows user to get to filters in hard-to-reach areas.
- Wide, dimpled band securely grips filters without crushing.
- Easy grip vinyl handle.
- Also available:
- 995 Swivel Oil Filter Wrench fits filters 3-7/16″ to 3-3/4″ (87mm-95mm) diameter
UPC: 047084009949
Shipping weight: 1lbQuick View -
Inner Tie Rod Removal Tool
$22.23Part No: 946
Inner Tie Rod Removal Tool
$22.23The Inner Tie Rod Removal Tool, is essential when working with applications when inner tie rods have round ends, but can also be used for rounded with flats, hex end versions and great for inner tie rod ends with damaged surfaces.
- Turns smooth tie rods easily.
- Simply slide tool over the end and tighten collar to allow access with an extension.
- Can remove Inner tie rod without removing the outer tie rod
- No more bulky tool to store.
- Inexpensive and effective way to turn these smooth tie rod ends.
UPC: 047084009468
Shipping weight: .75lbQuick View
