Products
Showing 217–228 of 317 resultsSorted by popularity
-
Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″
$39.84Part No: 892
Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″
$39.84- Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
- Use with 1/2″ square drive tool.
- Fits filters 4-21/32″ to 5-5/32″ (118mm-130mm) in diameter
UPC: 047084008928
Shipping weight: 1.2lbAlso available:
Quick View -
6PT Oxygen Sensor Wrench
$37.36Part No: 843CV
6PT Oxygen Sensor Wrench
$37.36The Flex head design offers essential clearance for removal or installation of oxygen sensors when it is positioned upward and inward to the floorboard or when leverage is needed around an exhaust pipe.
- Designed for all oxygen sensors with 7/8″ hex.
- For numerous applications including Ford® Contours 4.6L and 5.4L Ford® Modular engines
- Also works on 7/8″and 22mm knock sensors used on mid-sized trucks, SUVs, and vans.
- Incorporates a harness pass-thru in socket
UPC: 047084008430
Shipping weight: .9lb843 Oxygen Sensor Wrench Flyer
Also available:
844 – 6PT and 12PT Flex Oxygen Sensor WrenchQuick View -
6 PC 4WD Locknut Socket Set
$152.84Part No: 839CV
6 PC 4WD Locknut Socket Set
$152.84This high-quality steel, six-piece socket set features 1/2” square drives that enable technicians to use ratchets, breaker bars, and torque wrenches in their applications. This convenient set will cover the most common light truck and SUV applications and includes:
- 4-lug socket
- 6-lug socket
- GM® locknut socket
- Toyota® 4-lug locknut socket
- Ford® 4-lug locknut socket
- FWD front spindle puller
UPC: 047084008393
Shipping weight: 13.15lbsQuick View -
13 PC Alternator Coupler Pulley (ADP) Kit
$89.74Part No: 753CV
13 PC Alternator Coupler Pulley (ADP) Kit
$89.74The 13 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.
- To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
- Covers most US Euro makes and models with both on and off vehicle applications included, but not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler® Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz®, Pontiac®, Porsche®, Saturn®, Scion®, Toyota®, VW®.
- Eliminates the need to shop around for hard-to-find OWC and OAD tools
UPC: 047084007532
Shipping weight: 2.65lbsQuick View -
GM® Thermostat Wrench
$23.08Part No: 751CV
GM® Thermostat Wrench
$23.08The GM® Thermostat Wrench is designed to work on GM® 3.1 & 3.4 liter, V6 engines. A common job on these motors, as is in all motors, is thermostat replacement and to do this you must remove the thermostat housing. In these applications, the bottom housing bolt is almost inaccessible without removing other parts – until now.
- Unique shape and design allows users to remove and install housings quickly
- 13 mm
- 12-point with special bends
- Works on GM® 3.1 and 3.4 liter, V6 engines
UPC: 047084007518
Shipping weight: .4lbsQuick View -
Serpentine Belt Tool Set
$87.91Part No: 738
Serpentine Belt Tool Set
$87.91- Designed to remove and install serpentine belts on vehicles with spring-loaded belt tensioners
- Eases removal and installation of serpentine belt
- Extension bar for hard to access areas
- Fits tensioner pulleys with 13mm-16mm, 18mm hex, or 3/8″ and 1/2″ square drives.
- For hard to access tensioners, there are 13mm and 15mm, 12-point wrenches built into the handle.
- 13mm, 14mm, and 15mm crows foot wrenches also included.
UPC: 047084007389
Shipping weight: 4.57lbsQuick View -
The Grabber Serpentine Belt Tool
$31.87Part No: 734
The Grabber Serpentine Belt Tool
$31.87- Clamping jaw allows user to position serpentine belt without the belt slipping out of the tool.
- Tru-grip and long reach allows belt routing in tight access areas that would normally be difficult if not impossible.
- Body made of light-weight alloy steel for durability and strength.
- Ergonomic handle provides comfort and ease in use acting as an extension of the users hand.
- Patent Pending
UPC: 047084007341
Shipping weight: .95lbQuick View -
Disc Brake Piston Remover
$11.23Part No: 722
Disc Brake Piston Remover
$11.23- Rotates the parking brake-activated piston back into caliper cylinder when replacing worn pads.
- Used on most import Ford®, Chrysler®, and some GM® vehicles equipped with four wheel disc brakes.
- Use with 3/8″ drive.
UPC: 047084007228
Shipping weight: .15lbQuick View -
Line Quick Disconnect Tools
$12.73Part No: 684
Line Quick Disconnect Tools
$12.73- For spring lock coupling/snap lock air conditioning lines, late model fuel lines and automatic transmission cooler lines found on GM®, Ford®, and Chrysler® vehicles.
- Also works on Ford® transmission and radiator cooler lines.
- Six popular sizes fit the following tubing O.D. sizes: 5/16″ (8mm), 3/8″ (9mm), 1/2″ (13mm), 5/8″ (16mm), 3/4″ (19mm), and 7/8″ (22mm)
- Color coded and stamped with tool size for quick identification
UPC: 047084006849
Shipping weight: .05lbsQuick View -
Battery Terminal Clamp Spreader
$30.89Part No: 549CV
Battery Terminal Clamp Spreader
$30.89- Designed to both spread battery cable clamp and clean terminal in one swift operation.
- Forged and heat treated jaws.
- 7-1/2″ overall length.
UPC: 047084005491
Shipping Weight: .65lbQuick View -
Flange Type Axle & Front Wheel Hub Puller
$48.64Part No: 526
Flange Type Axle & Front Wheel Hub Puller
$48.64- For use on domestic and import cars and light trucks.
- Range is 3-3/4″ – 4-1/2″
- For use on 4, 5, or 6 bolt stud design and all non-C Lock GM axles.
UPC: 047084005262
Shipping Weight: 2.95lbsQuick View -
Disc Brake & Small Engine Hone
$22.52Part No: 357
Disc Brake & Small Engine Hone
$22.52- Adjustable tension flex shaft cylinder hone covers 1-1/4″ to 3-1/2″ (32mm – 89mm) diameter cylinders.
- Use on most compact cars, as well as, cycles, lawnmowers, and outboard motors.
- Includes three 2″ (51mm) Medium grit stones, part 357-1.
- Replacement Stones:
- 357-1 Replacement Stones 2″ (51mm) Medium Grit, 220-240 Grit. Set of 3.
- 357-3 Replacement Stones 2″ (51mm) Fine Grit, 400 Grit. Set of 3.
- To hone disc brake cylinders larger than 1-1/4″ (32mm): 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003572
Shipping Weight: .25lbsQuick View
