Products
Showing 181–192 of 319 results
-
Disc Brake Piston Remover
$10.22Part No: 722
Disc Brake Piston Remover
$10.22- Rotates the parking brake-activated piston back into caliper cylinder when replacing worn pads.
- Used on most import Ford®, Chrysler®, and some GM® vehicles equipped with four wheel disc brakes.
- Use with 3/8″ drive.
UPC: 047084007228
Shipping weight: .15lbQuick View -
Disc Brake Pad Spreader
$35.72Part No: 703
Disc Brake Pad Spreader
$35.72- Used for easy efficient brake pad installation
- Works on all standard and four-piston caliper disc brakes
- Cuts installation time dramatically
- Tool fits between the two new pads being installed then expands to retract the piston
- Leaves both hands free to slide the caliper over the rotor
- After it’s started, the spreader is removed and you can slide the caliper over the rotor
UPC: 047084007037
Shipping weight: .6lbsQuick View -
Disc Brake Pad Spreader
$11.63Part No: 702
Disc Brake Pad Spreader
$11.63- Facilitates the quick and easy changing of disc brake pads
- Spreader will compress inner pad and reset piston for easy pad replacement
- Heavy duty construction
UPC: 047084007020
Shipping weight: .55lbsQuick View -
Disc Brake & Small Engine Hone
$20.49Part No: 357
Disc Brake & Small Engine Hone
$20.49- Adjustable tension flex shaft cylinder hone covers 1-1/4″ to 3-1/2″ (32mm – 89mm) diameter cylinders.
- Use on most compact cars, as well as, cycles, lawnmowers, and outboard motors.
- Includes three 2″ (51mm) Medium grit stones, part 357-1.
- Replacement Stones:
- 357-1 Replacement Stones 2″ (51mm) Medium Grit, 220-240 Grit. Set of 3.
- 357-3 Replacement Stones 2″ (51mm) Fine Grit, 400 Grit. Set of 3.
- To hone disc brake cylinders larger than 1-1/4″ (32mm): 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003572
Shipping Weight: .25lbsQuick View -
Disc Brake & Caliper Hone
$14.52Part No: 358
Disc Brake & Caliper Hone
$14.52- Equipped with special size Fine Grit Stones to hone disc brake calipers, providing that the diameter of the bore is not increased over .002″ (5mm).
- Adjustable tension capacity 3/4″ – 2-1/2″ (19mm-64mm)
- Includes three 3/4″ (19mm) Fine Grit Stones
- Replacement Stones:
- 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003589
Shipping Weight: .2lbsQuick View -
Diesel Exhaust Fluid Tester
$15.81Part No: 610
Diesel Exhaust Fluid Tester
$15.81• Designed to work on Semi trucks, as well as some trucks and cars
• Easy to read discs provide indication DEF quality determined by water concentration levels
• Tests for DEF concentration levels within tank
• Works on petcock and capped type tanksUPC: 047084006108
Shipping Weight: .06lbsQuick View -
Dent Puller & Knocker Set
$189.99Part No: 49800CV
Dent Puller & Knocker Set
$189.99The paintless dent repair kit comes with the most popular adapters used for auto body pulling applications. Heavy duty 9-1/2LBS hammer easily helps pulling dents without strain or any need for extra specialty tools. All adapter attachments are heat treated and plated for strength, longevity and durability.
- Kit comes with the most popular adapters for auto body pulling applications
- Comes with 9-1/2 LBS slide hammer
- All attachments are heat treated and plated for strength and longevity
UPC: 047084498002
Shipping weight: 23lbsQuick View -
DEBURRING CHAMFER TOOL BIT
$24.00Part No: 49100CV
DEBURRING CHAMFER TOOL BIT
$24.00Designed to clean and repair damaged bolts and fasteners. Can be used for hard steel applications with lubricating oil to improve tool performance. NOT recommended for use with Impact driver.
- Applicable for use on threads from 1/4″ to 3/4″ in diameter.
- 72 Degree deburring capacity
- 3-HSS blades
- 1/4″ bit Dr. to fit any drill type
UPC: 047084491003
Shipping Weight: .16lbsQuick View -
Cup Type Oil Filter Wrench 93mm
$6.31Part No: 791
Cup Type Oil Filter Wrench 93mm
$6.31- These cup-type filters are made of 7 and 16 gauge construction and can withstand up to 85 ft. lbs. of torque.
- Cup-type design grips like a socket thus minimizing the possibility of crushing filters.
- Use with 3/8″ drive.
- 93mm (3-21/32″) – 15 flutes – 1 step
- Fits: Casite, Champ, Champion, GM, Fram, Hastings, Purolator, Wix, Nissan, VW, Porsche, Renault
UPC: 047084007914
Shipping weight: .35lbsAlso available:
Quick View -
Cup Type Oil Filter Wrench 76mm
$6.31Part No: 789
Cup Type Oil Filter Wrench 76mm
$6.31- These cup-type filters are made of 7 and 16 gauge construction and can withstand up to 85 ft. lbs. of torque.
- Cup-type design grips like a socket thus minimizing the possibility of crushing filters.
- Use with 3/8″ drive.
- 76mm (3″) – 14 flutes – 1 step
- Fits: Champion, Champ, Lee, Purolator, Mopar, VW, Porsche, Mercedes, BMW.
UPC: 047084007891
Shipping weight: .3lbsAlso available:
Quick View -
Cup Type Oil Filter Wrench 74mm – 76mm
$6.31Part No: 788
Cup Type Oil Filter Wrench 74mm – 76mm
$6.31- These cup-type filters are made of 7 and 16 gauge construction and can withstand up to 85 ft. lbs. of torque.
- Cup-type design grips like a socket thus minimizing the possibility of crushing filters.
- Use with 3/8″ drive.
- 74mm – 76mm (2-29/32″) – 15 flutes – 2 step
- Fits: Fram, AC, Saturn.
UPC: 047084007884
Shipping weight: .3lbsAlso available:
Quick View -
Cup Type Oil Filter Wrench 65mm
$6.85Part No: 785
Cup Type Oil Filter Wrench 65mm
$6.85- These cup-type filters are made of 7 and 16 gauge construction and can withstand up to 85 ft. lbs. of torque.
- Cup-type design grips like a socket thus minimizing the possibility of crushing filters.
- Use with 3/8″ drive.
- 65mm (2-9/16″) – 14 flutes – 1 step
- Fits: Champ, Hastings, FM/AC, Wix, Napa, Purolator, Daihatsu, Toyota
UPC: 047084007853
Shipping weight: .25lbsAlso available:
Quick View
