Products
Showing 1–12 of 316 resultsSorted by latest
-
New!
Magnetic Field Indicator
$21.99Part No: 82000CV
Magnetic Field Indicator
$21.99- Immediately verify an active or inactive ignition coil by putting the tip near the coil.
- A blue LED light will display every time a magnetic field is detected.
UPC: 047084820001
Shipping weight: .11lbs82000 – Magnetic Field Indicator Flyer
Quick View -
11PC Impact Adapter Socket Set
$159.00Part No: 48200CV
11PC Impact Adapter Socket Set
$159.00- 8 adapters with four drive sizes
- 3 universal joint that come in three drive sizes
- Secure connection with detent ball and pin and ring capacities
UPC: 047084482001
Shipping Weight: 3.95lbsQuick View -
Light Duty Yoke Puller
$74.99Part No: 49750CV
Light Duty Yoke Puller
$74.99This puller is used to removal automotive yokes on drive shafts and transmissions while reducing the risk of damage to the yokes.
- Made from high quality steel to provide reliable use for years
- Used on Ford F150/F350, Chevrolet 1500/3500, Dodge RAM 1500/3500
UPC: 047084497500
Shipping Weight: .43lbsQuick View -
Fuel Pump Locking Ring Tool
$43.95Part No: 25310CV
Fuel Pump Locking Ring Tool
$43.95The Fuel Pump Lock Ring Tool is designed to quickly remove and install fuel tank lock rings when servicing fuel pump or fuel sending unit replacement. Universal design fits to any 7.25″ O.D. metal or plastic lock rings found on Ford, Chrysler and G.M. vehicles.
- Unique design fits on multiple makes and models of fuel tank lock rings
- Easily removes and installs fuel tank lock rings when servicing fuel pump or fuel sending unit
- Allow for greater clearance on the top of fuel sending units than other versions
- Easily attach 1/2″ drive ratchet or breaker bar
- Professional grade steel with black oxide finish to resist rust and corrosion
Applications: (not limited) :
- Fits for Dodge Ram 1500 2500 3500 4500
- Dodge Charger Dodge Challenger SXT
- Chevy Silverado Malibu, Maxx, Colorado, Avalanche, Trailblazer, Camaro SS
- Fits 2005 Mercury Montego
- 2005-2006 Pontiac Bonneville & G6
- 2006 Chrysler 300c
- 2011 Kia Sorento
- Jeep Wrangler, TJ Jeep, Compass
- Ford Explorer, Ford F-150, Ford Ranger
- Mercury Mariner
UPC: 047084253106
Shipping Weight: 1.15lbsQuick View -
Tie Rod End Puller
$22.52Part No: 194
Tie Rod End Puller
$22.52Designed to easily separate tie rod ends and separate pitman arms from steering gears. Can be used to remove both tie rod ends and pitman arms on many small domestic rear wheel drive cars and light trucks.
- Cap screw has a 3/8″ Female drive
- 1-15/16″ of pull travel and over 1″ of jaw opening
- Replacement center screw: Part 194-1
UPC: 047084001943
Shipping Weight: 1lbQuick View -
Outer Tie Rod Remover
$47.74Part No: 188
Outer Tie Rod Remover
$47.74The Outer Tie Rod Tool comes with specially designed jaws and cup style end on forcing screw that removes the chance of damage caused by other less effective methods like hammering.
- Our most versatile puller can be used on a wide array of tie rod ends and ball joints.
- Working range of 4″ of spread and a reach of 3-5/8″
- Replacement center screw: 188-1
- Replacement swivel: 188-2
UPC: 047084001882
Shipping Weight: 2.5lbsQuick View -
Ball Joint Separator
$33.09Part No: 184
Ball Joint Separator
$33.09This ball joint separator is used to separate ball joints from spindle support arms on almost all domestic and import, front wheel drive vehicles. This tool has two different joint positions that is adjustable up to 2″ for different sized ball joint applications.
- Use to separate ball joints from spindle
- Threaded forcing screw allow the tool to be used on different size ball joints
- Fits on virtually all domestic and import vehicles
- 13/16″ opening
- Replacement pin assembly: 184-1
- Replacement screw: 184-2
UPC: 047084001844
Shipping Weight: 2.75lbsQuick View -
Tie Rod End Tool Open Jaw 19mm
$38.15Part No: 182
Tie Rod End Tool Open Jaw 19mm
$38.15The tie rod end tool is designed to force out tie rod ends from spindles and steering arm on virtually all domestic and import cars with tie rod screw diameter up to 3/4″. Comes with a swivel head cup style end that removes the chance of damage and frustration caused by other less effective methods like hammering.
- Force out tie rod ends from spindles with tie rod screw diameter up to 3/4″
- Forces steering arms on virtually all domestic and import cars
- Opens to 1-5/8″
- Replacement center screw and swivel: 182-1
- For larger jobs use our 188 or 194 tie rod pullers
UPC: 047084001820
Shipping Weight: 1.5lbsQuick View -
DEBURRING CHAMFER TOOL BIT
$24.00Part No: 49100CV
DEBURRING CHAMFER TOOL BIT
$24.00Designed to clean and repair damaged bolts and fasteners. Can be used for hard steel applications with lubricating oil to improve tool performance. NOT recommended for use with Impact driver.
- Applicable for use on threads from 1/4″ to 3/4″ in diameter.
- 72 Degree deburring capacity
- 3-HSS blades
- 1/4″ bit Dr. to fit any drill type
UPC: 047084491003
Shipping Weight: .16lbsQuick View -
Dodge Wheel Hub Removal Adapter
$21.03Part No: 90300CV
Dodge Wheel Hub Removal Adapter
$21.03- Designed to easily remove the front hubs of Dodge 2500 and 3500 trucks
- Uses the force of the power steering system to loosen the hub assembly, instead of having to other methods which can possibly damage the hub assembly
- Quickly adapts for Ford and Dodge applications
- Hub Bolt size 3/4″–19MM
Quick View -
10 Ton Push Puller
$139.95Part No: 18100CV
10 Ton Push Puller
$139.95The 10 Ton Push Puller is designed to push or pull depending on how the puller is set up. Ideally to be used with various pulling attachments when needing to remove press fitted parts such as bearings, gears and other components.
- Designed to remove and install press to fit parts, gears, bearing and shafts
- Can be used with bearing pullers and pulley pulling attachments
- 10 Ton Capacity
- Cross Bar spread range 2-1/8″-7-1/4″
- Maximum reach of 8-1/4″
- Heavy Duty Truck Applications
UPC: 047084181003
Shipping weight: 7.25lbsQuick View -
Sheppard M110 Pitman Arm Puller
$199.99Part No: 18630CV
Sheppard M110 Pitman Arm Puller
$199.99- Replaces less effective and often destructive methods to remove pitman arms
- Constructed of high-strength materials for increased pulling power
- Rated for usage with up to a 3/4″ drive impact for faster removal
- Applicable to highway transportation vehicles, RVs, buses, and equipment
UPC: 047084186305
Shipping weight: 11lbsQuick View