General Hand Tools
Showing 49–60 of 74 resultsSorted by price: high to low
-
2-3/8″ LED Lighted Inspection Mirror
$20.55Part No: 32CV
2-3/8″ LED Lighted Inspection Mirror
$20.55View and thoroughly inspect dark, hard to reach areas with an integrated LED light and large, fully-articulated mirror and up to 37″ of extension.
- Head swivels nearly 360˚ to inspect hidden and hard-to-reach areas
- LED lighted head illuminates dark recesses with replaceable batteries
- Ball-joint connection is sturdy enough to hold the head at nearly any angle
- Closed the unit is 6-1/2″ and the stainless-steel handle extends to 37″
- Features an ergonomic, textured grip
- Batteries included (2-CR2016)
Applications:
Numerous applications in the automotive field, especially useful when you do not have access to a borescope.UPC: 047084000328
Shipping Weight: .75lbsQuick View -
Heavy Duty Pinch Off Pliers
$20.23Part No: 16500
Heavy Duty Pinch Off Pliers
$20.23- Eliminates the need to drain systems when servicing cooling systems.
- Pliers squeeze heater or radiator hoses shut and jaws swivel for parallel clamping.
- Automatic locking ratchet.
- May also be used to pinch off vacuum lines and fuel lines.
- For use on wire reinforced radiator hoses.
UPC: 047084165003
Shipping weight: 1.15lbsQuick View -
Tube Bend Mirror Adapters
$20.22Part No: 75902
Tube Bend Mirror Adapters
$20.22These adapters allow users to easily create matching bends and angles on two lines at the same time or use an existing tube to guide the creation of a replacement line. Remove the guesswork and do it right the first time.
- Adapters used to mirror or match the brake line runs for duplication of bends.
- Allows users to precisely match proper angles and points on run to make bends.
- For steel, copper, and plastic-coated brake lines with diameters of 3/16” (4.75mm) or ¼” (6.3mm)
UPC: 047084759028
Shipping Weight: .09lbQuick View -
3 PC Drive Adapters Set
$19.54Part No: 487
3 PC Drive Adapters Set
$19.54- Set of drive adapters that step
- Available in a set or individually
- Part 487-1: 1/4″F x 3/8”M
- Part 487-2: 3/8”F x 1/2″M
- Part 487-3: 1/2″F x 3/4″M
UPC: 047084004876
Shipping Weight: .64lbsQuick View -
Twin Spin Drive Converter 3/8″ – 1/2″
$19.28Part No: 489
Twin Spin Drive Converter 3/8″ – 1/2″
$19.28- Can be used to use a 3/8″ drive socket on a 1/2″ ratchet or a 1/2″ drive socket on a 3/8″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004890
Shipping Weight: .3lbsQuick View -
Drop and Drive Spring Loaded Bit Holder
$18.86Part No: 494
Drop and Drive Spring Loaded Bit Holder
$18.86Presenting the patented magnetic bit driver with a guide that retracts and extends on its own every time, unlike any driver on the market! For use anywhere, inside and out, from putting up drywall and cement board to hanging sheathing or installing decking. Reloads faster, drop the fastener in and drive it.
- Spring-loaded bit adapter that guides it drives
- Guide will not only retract but will also extend back
- Guide locks to easily interchange bits
- Internal magnet holds bits in place
- For use with power tools including impact drivers
- Accepts existing, common 1/4″ hex bits
- Limited lifetime warranty
UPC: 047084004944
Shipping Weight: .13lbs494 Drop and Drive Sales Sheet
Quick View -
Twin Spin Drive Converter 1/4″ – 3/8″
$18.45Part No: 488
Twin Spin Drive Converter 1/4″ – 3/8″
$18.45- Can be used to use a 1/4″. drive socket on a 3/8″ ratchet or a 3/8″ drive socket on a 1/4″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004883
Shipping Weight: .45lbsQuick View -
Fluted Screw Extractor Set
$17.00Part No: 441
Fluted Screw Extractor Set
$17.00Made from forged alloy steel, this this tapered style extractor can be used to extract broken studs, screws, pipe and pipe fittings.
- Has gradual taper and long flutes.
- Available as individuals:
Part 441-1 – For Removing Screw/Stud/Bolt – 1/4″, 5/16″
Part 441-2 – For Removing Screw/Stud/Bolt – 3/8″
Part 441-3 – For Removing Screw/Stud/Bolt – 7/16″
Part 441-4 – For Removing Screw/Stud/Bolt – 1/2″, 9/16″
Part 441-5 – For Removing Screw/Stud/Bolt – 5/8″
UPC: 047084004418
Shipping Weight: .3lbsQuick View -
Mini Finger Ratchet
$16.82Part No: 108-BLUE
Mini Finger Ratchet
$16.82- New finger Style Ratchet
- Small size great for tight areas
- Aluminum Knurled outer ring for sure grip
- Reversible Ratchet
- 1/4″ Drive on one side to 1/4″ Hex Drive on other side
- Blue Anodized aluminum
UPC: 047084001080
Shipping Weight: .15lbsQuick View -
90 Degree Gearless Angle Drive 3/8″
$16.00Part No: 483
90 Degree Gearless Angle Drive 3/8″
$16.00- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
UPC: 047084004838
Shipping Weight: .45lbsQuick View -
90 Degree Gearless Angle Drive 1/4″
$16.00Part No: 482
90 Degree Gearless Angle Drive 1/4″
$16.00- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
UPC: 047084004821
Shipping Weight: .3lbsQuick View -
4 PC Spiral Screw Extractor Set
$15.28Part No: 438
4 PC Spiral Screw Extractor Set
$15.28Made from forged alloy steel, this spiral style extractor can be used to extract broken studs or screws.
- Correct drill size for hole in part to be extracted is indicated on the tool.
- Available as individuals:
Part 431 – For Removing Screws Shank – 3/16″
Part 432 – For Removing Screws Shank – 1/4″
Part 433 – For Removing Screws Shank – 5/16″
Part 434 – For Removing Screws Shank – 7/16″
UPC: 047084004388
Shipping Weight: .2lbsQuick View
