CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

General Hand Tools

Showing 37–48 of 59 results

  • Tube Bend Mirror Adapters

    $20.22

    Part No: 75902

    Tube Bend Mirror Adapters

    $20.22

    These adapters allow users to easily create matching bends and angles on two lines at the same time or use an existing tube to guide the creation of a replacement line. Remove the guesswork and do it right the first time.

    • Adapters used to mirror or match the brake line runs for duplication of bends.
    • Allows users to precisely match proper angles and points on run to make bends.
    • For steel, copper, and plastic-coated brake lines with diameters of 3/16” (4.75mm) or ¼” (6.3mm)

    Quick View
  • Drive Adapters

    $19.54

    Part No: 487

    Drive Adapters

    $19.54

    FEATURES

    Set of drive adapters that step
    ¼” to 3/8”
    3/8” to ½”
    ½” to ¾”
    Available in a set or individually

    Quick View
  • Twin Spin Drive Converter 3/8″ – 1/2″

    $19.28

    Part No: 489

    Twin Spin Drive Converter 3/8″ – 1/2″

    $19.28

    FEATURES

    • Can be used to use a 3/8 in. drive socket on a 1/2in. ratchet or a 1/2in. drive socket on a 3/8in. ratchet.
    • Can withstand higher torque than traditional adapters.
    • Can be used as a small extension or hand drive for tight access.
    • Patented
    Quick View
  • Drop and Drive

    $18.86

    Part No: 494

    Drop and Drive

    $18.86

    Presenting the patented magnetic bit driver with a guide that retracts and extends on its own every time, unlike any driver on the market! For use anywhere, inside and out, from putting up drywall and cement board to hanging sheathing or installing decking. Reloads faster, drop the fastener in and drive it.

    FEATURES

    • Spring-loaded bit adapter that guides it drives
    • Guide will not only retract but will also extend back
    • Guide locks to easily interchange bits
    • Internal magnet holds bits in place
    • For use with power tools including impact drivers
    • Accepts existing, common ¼” hex bits
    • Backed by a limited lifetime warranty
    Quick View
  • Twin Spin Drive Converter 1/4″ – 3/8″

    $18.45

    Part No: 488

    Twin Spin Drive Converter 1/4″ – 3/8″

    $18.45

    FEATURES

    • Can be used to use a 1/4 in. drive socket on a 3/8in. ratchet or a 3/8in. drive socket on a 1/4in. ratchet.
    • Can withstand higher torque than traditional adapters.
    • Can be used as a small extension or hand drive for tight access.
    • Patented
    Quick View
  • Tamper Resistant Square Drive Torx Bit Set

    $17.15

    Part No: 914

    Tamper Resistant Square Drive Torx Bit Set

    $17.15

    FEATURES

    • Designed for installing and removing tamper-proof Torx fasteners.
    • Set includes: T-10, T-15, T-20, T-25, T-27, T-30, and T-40 plus bit holder and 14in x 14in stored in vinyl pouch.
    Quick View
  • Finger Ratchet 3/8″

    $16.33

    Part No: 109

    Finger Ratchet 3/8″

    $16.33

    FEATURES

    • New finger Style Ratchet
    • Small size great for tight areas
    • Aluminum Knurled outer ring for sure grip
    • Reversible Ratchet
    • 3/8″ Drive on one side 1/4″ Hex Drive on other
    • Available in Blue Anodized aluminum
    Quick View
  • Spiral Screw Extractor Set

    $15.28

    Part No: 438

    Spiral Screw Extractor Set

    $15.28

    FEATURES

    • Forged alloy steel this this spiral style extractor can be used to extract broken studs or screws.
    • Correct drill size for hole in part to be extracted is indicated on the tool.
    • Available as individuals:
      No. 431 – For Removing Screws Shank – 316
      No. 432 – For Removing Screws Shank – 14
      No. 433 – For Removing Screws Shank – 516
      No. 434 – For Removing Screws Shank – 716
    Quick View
  • Versa-Drive Adapters

    $14.43

    Part No: 490

    Versa-Drive Adapters

    $14.43

    FEATURES

    The Versa-Drive adapters allow users to easily switch between sockets and hex bits without having to switch adapters.
    Unlike current 1/4” hex-to-square socket adapters, the Versa-Drive incorporates the hex drive into the square socket head itself allowing users to go back and forth between bit and socket without ever removing the adapter from the tool.
    Used with 1/4” hex drive tools like impact drivers or 1/4” drill chucks the Versa-Drive is a real time saver in a variety of applications.

    1/4” Hex shank adapters
    3/8” Drive adapter with 1/4” hex for bits (Part No. 491)
    1/2” Drive adapter with 5/16” hex for bits (Part No. 492)
    Enables users to easily switch between sockets and hex bits
    Impact rated for use in 1/4” cordless and pneumatic impact drivers
    For torques up to 167 ft/lbs or 2,000 in/lbs

    Quick View
  • Light Bulb Pliers

    $13.59

    Part No: 47

    Light Bulb Pliers

    $13.59

    Removing or installing small automotive bulbs should not be a hassle. They are fragile and easily broken. Sometimes it is hard to reach a bulb with just your fingers. The other concern could be corrosion. These pliers make it easy to handle small bulbs in any scenario, and the extended bulb grippers give you the ability to get into hard-to-reach areas.

    •Fits most mini and small bulbs
    •Rubber-coated tips designed to grip bulbs safely
    •Extended reach for recessed, corroded, and broken bulbs
    •Scissor design for easy handling
    •Cushioned grips

    Applications:
    Mini and some small bulb sizes

    Quick View
  • Magnetic Pick-Up Tool and LED Pen Light

    $12.54

    Part No: 33

    Magnetic Pick-Up Tool and LED Pen Light

    $12.54

    Use the LED flashlight to view dark and dim recesses and use the extendable magnet end to retrieve items from hard-to-reach areas. Has a convenient pocket clip to keep with you for whenever you need it.

    FEATURES

    • Magnet on one end to retrieve items from hard-to-reach areas
    • Durable aluminum body with a LED flashlight
    • Closed the unit is 7-¼” and the telescoping stainless-steel inner tube extends to 27-¼”
    • Convenient pocket clip
    • Batteries included (4-LR41)

    Applications:
    Numerous applications in the automotive field, a great daily companion

    Quick View
  • Magnetic Extendable Pick-up Tool

    $12.54

    Part No: 30

    Magnetic Extendable Pick-up Tool

    $12.54

    Get the reach and strength you need with a telescoping magnet pick-up tool with a cushioned, textured grip and over two pounds of lifting capacity.

    FEATURES

    • Shielded magnet with 2-½ lbs. of lifting power
    • Closed the unit is 5-½” and the stainless-steel handle extends to 25-½”
    • Features an ergonomic textured grip
    • Pen-style clip and compact design make it easy to carry with you daily

    Applications: Numerous applications to pick up metal objects in hard-to-reach areas.

     

    Quick View