Brake Tools
Showing 25–35 of 35 resultsSorted by latest
-
Brake Bleeder Tank
$183.21Part No: 855
Brake Bleeder Tank
$183.21This lightweight and easy-to-use, portable tank fills and bleeds both standard and power brakes in a single operation. Tank is easily pressurized with just a few strokes of the built-in hand pump.
- Eliminates the need for a compressor
- One (1) gallon capacity features extra-long hose, quick disconnect coupler, shut-off valve and pressure gauge
UPC: 047084008553
Shipping weight: 5.4lbs855 – Brake Bleeder Tank Manual
Quick View -
Sub-Compact Brake Cylinder Hone
$16.70Part No: 762
Sub-Compact Brake Cylinder Hone
$16.70Used to recondition the inside of brake cylinders by removing rust, grim, and glaze to create a smooth surface for new seals to function properly.
- Recommended for cylinder bores 1/2″ to 2-1/4″ (13mm – 57mm) in diameter
- Offers fast, easy cutting with high or low speed drills
- Self-aligning and self-centering
- Flex joint drive with adjustable tension
- Includes: Two 1-1/8″ (29mm) Medium Grit Stones
- 220-240 grit
- Replacement Stones: Part#763 1-1/8″ (29mm) Medium Grit Stones
UPC: 047084007624
Shipping weight: .2lbsQuick View -
2 and 3 Pin Adjustable Brake Caliper Turn Back Tool
$65.93Part No: 723
2 and 3 Pin Adjustable Brake Caliper Turn Back Tool
$65.93The two and three pin adjustable brake caliper turn back tool is designed to rotate brake pistons back into the caliper on vehicles with self-adjusting parking brakes.
- Tool has one side with 2 pins and other side has 3 pins
- Replaces kits that contain up to 20 parts by having universally adjustable 2 and 3 pin configurations
- Use with 1/4″ ratchet or breaker bar
- Works on both right and left hand pistons
- Will work on most domestic and import vehicles
- Closed spread O.D.: 21mm (.826″)
- Open spread O.D.: 40mm (1.574″)
UPC: 047084007235
Shipping weight: .4lbs723 Two & Three Pin Brake Tool Flyer
Also available:
724 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool Set
725 – 2 Pin Adjustable Brake Caliper Turn Back Tool
726 – 3 Pin Adjustable Brake Caliper Turn Back ToolQuick View -
Disc Brake Piston Remover
$11.23Part No: 722
Disc Brake Piston Remover
$11.23- Rotates the parking brake-activated piston back into caliper cylinder when replacing worn pads.
- Used on most import Ford®, Chrysler®, and some GM® vehicles equipped with four wheel disc brakes.
- Use with 3/8″ drive.
UPC: 047084007228
Shipping weight: .15lbQuick View -
Disc Brake Pad Spreader
$39.25Part No: 703
Disc Brake Pad Spreader
$39.25- Used for easy efficient brake pad installation
- Works on all standard and four-piston caliper disc brakes
- Cuts installation time dramatically
- Tool fits between the two new pads being installed then expands to retract the piston
- Leaves both hands free to slide the caliper over the rotor
- After it’s started, the spreader is removed and you can slide the caliper over the rotor
UPC: 047084007037
Shipping weight: .6lbsQuick View -
Universal Brake Pad Spreader
$35.45Part No: 700
Universal Brake Pad Spreader
$35.45- Allows installer to easily compress both pistons at once
- Facilitates both single and dual piston applications
- Applications: Ford® F-150 & F-250, Ford® & GM® front wheel drive vehicles
UPC: 047084007006
Shipping weight: 1.8lbsQuick View -
Toyota® Brake Spring Tool
$20.88Part No: 364
Toyota® Brake Spring Tool
$20.88The low-profile design of this tool, allows the user to put the tip of this tool through the access hole and engage the parking brake spring cup, turn and release the pin on a variety of Toyota® vehicles.
- Special tip is designed to engage the shoe hold down spring cup
- Lower profile brake spring tool with a longer reach
- 2000 and current Tacoma, Tundra, FJ Cruiser, 4Runner, Land Cruiser, and Camry
UPC: 047084003640
Shipping Weight: .25lbsQuick View -
Adjustable Brake Cylinder Hone
$17.30Part No: 362
Adjustable Brake Cylinder Hone
$17.30Finest “full range” hone on the market covering sizes from 3/4″ to 2-1/2″ (19mm-64mm).
- Knurled nut controls tension for honing, deglazing throughout full range.
- Hones clear to end in step-cut and blind end cylinders.
- Flexible shaft for easy use right on car.
- Includes set of three 1-1/8″ (29mm) Medium Grit Stones, 220-240, Grit. Replacement part: 363.
- Can also use replacement stones, 363-01 (fine grit) or 363-02 (coarse grit).
UPC: 047084003626
Shipping Weight: .2lbsQuick View -
Disc Brake & Caliper Hone
$15.96Part No: 358
Disc Brake & Caliper Hone
$15.96- Equipped with special size Fine Grit Stones to hone disc brake calipers, providing that the diameter of the bore is not increased over .002″ (5mm).
- Adjustable tension capacity 3/4″ – 2-1/2″ (19mm-64mm)
- Includes three 3/4″ (19mm) Fine Grit Stones
- Replacement Stones:
- 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003589
Shipping Weight: .2lbsQuick View -
Disc Brake & Small Engine Hone
$22.52Part No: 357
Disc Brake & Small Engine Hone
$22.52- Adjustable tension flex shaft cylinder hone covers 1-1/4″ to 3-1/2″ (32mm – 89mm) diameter cylinders.
- Use on most compact cars, as well as, cycles, lawnmowers, and outboard motors.
- Includes three 2″ (51mm) Medium grit stones, part 357-1.
- Replacement Stones:
- 357-1 Replacement Stones 2″ (51mm) Medium Grit, 220-240 Grit. Set of 3.
- 357-3 Replacement Stones 2″ (51mm) Fine Grit, 400 Grit. Set of 3.
- To hone disc brake cylinders larger than 1-1/4″ (32mm): 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003572
Shipping Weight: .25lbsQuick View -
One Man Brake Bleeder
$7.31Part No: 24700
One Man Brake Bleeder
$7.31- Simple design for ease of use.
- No springs, no diaphragms, no moving parts, no connections to leak, and no way air can re-enter the system once the brake pedal is released.
- Instructions included
UPC: 047084002476
Shipping weight: .05lbsQuick View