CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Shop

Showing 82–90 of 316 results

  • All Size Oil Filter Wrench

    $9.72

    Part No: 814

    All Size Oil Filter Wrench

    $9.72

    FEATURES

    • This filter wrench adjusts quickly to any spin-on filter up to 6in in diameter.
    • Strong nylon web belt will not slip.
    • Use with 1⁄2in square drive wrench.
    • No. 814-02 Replacement Strap
    Quick View

  • Alternator Coupler Pulley (ADP) Kit, 22 Piece

    $130.00

    Part No: 750

    Alternator Coupler Pulley (ADP) Kit, 22 Piece

    $130.00

    Used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys.

    FEATURES

    • To remove these pulleys the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise depending on the manufacturer. The opposite would be used in the installation
    • OWC’s were first used in 1997 followed by the OAD in 1999. Today more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems
    • Will service vehicles included but are not limited to: Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroen, Dodge, Fiat, Ford, Honda, Lexus, Mercury, Mercedes-Ben,z Opel, Pontiac, Peugeot, Porsche, Renault, Saturn, Seat, Scion, Toyota, and VW
    Quick View

  • Alternator Service Bit Set, 5 Piece

    $29.92

    Part No: 756

    Alternator Service Bit Set, 5 Piece

    $29.92

    FEATURES

    • Kit for removing and installing many alternator decoupler pulleys on popular vehicles.
    • To remove these pulleys the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counter clockwise depending on the manufacturer. The opposite would be used in installation.
    • Set Includes: H22 x 33T
    • H17 x H19
    • H10 x 70mm L
    • 12mm x 75mm L x T50
    • Spline M10
    Quick View

  • Amp Alert

    $46.89

    Part No: 69

    Amp Alert

    $46.89
    • Instant Parasitic Drain Finder
    • Tool used to detect parasitic Drain without removing a fuse from the fuse box.
    • Simply touch probes to the top of the fuse and tool gives off a distinct audible tone when parasitic drain current is detected.
    • A huge time saver for the technician. Cuts troubleshooting time by up to 90%.
    • Avoid blown multi-meter fuses.
    • Resolution down to 5 milliamps.
    • 1 year warranty

    UPC: 047084000694
    Shipping Weight: .25lb

    Quick View

  • Amp Hound

    $90.00

    Part No: 74

    Amp Hound

    $90.00
    • Designed to drastically reduce the amount of time needed to find current in all ATM, ATO, and MAXI type fused circuits
    • Audible beep instantly tells you if there is any current in any circuit
    • Fuses do not need to be removed to read current, check the entire fuse block quickly
    • Easily find the parasitic drain
    • Battery operated with an automatic shut-off
    • Use standard test leads to touching the top of the Fuse
    • Patent Pending
    • Replacement leads: 74-2
    • 1 year warranty

    UPC: 047084000748
    Shipping Weight: .7lbs

    Amp Hound Manual

    Check out the Amp Hound 2 #72 

    Quick View

  • Amp Hound 2

    $162.28

    Part No: 72

    Amp Hound 2

    $162.28

    The Amp Hound 2 is a designated Amp meter for a safe and convenient method to determine real time readings of current and amps in fused circuit without removing the fuse. Convenient and easy adapters that attach to a fuse or just touch the probes to the top of the fuse for an amp reading.  A tone lets you know when you are touching a fuse that has parasitic draw and no need to remove fuse or stare at meter. Works on multiple fuse type along with three of the most common automotive fuse types. Very safe to use with no chance of shorting a circuit while the fuse is removed.

    • Real time readings of current and amps in fused circuit without removing fuse
    • For use on 6V, 12V and 24V systems only
    • Ideal for locating a parasitic drain
    • Special fuse adapters lock on to fuse to give user hands-free control
    • Includes all features from the original Amp Hound that allows easy component testing and parasitic drain location
    • Takes amperage readings without having to access hard to reach components
    • Audible tone when in contact with fuse, ensuring use has complete contact
    • Patent Pending
    • 1 year warranty
    • Replacement leads:
      • 72-1 Small
      • 72-2 Middle
      • 72-3 Large

    UPC: 047084000724
    Shipping Weight: 1.1lbs

    72 – Amp Hound 2 Manual 

    Check out the “original” Amp Hound!

     

    Quick View

  • Antenna & Radio Socket Set

    $71.66

    Part No: 142

    Antenna & Radio Socket Set

    $71.66

    FEATURES

    • Eleven-piece kit in molded case.
    • Universal antenna wrench.
    • Ford radio removal tool.
    • Deep sockets to remove and install the tamper-proof radio nuts from many GM Chrysler and other aftermarket radios.
    • Antenna nut sockets that cover most import and domestic antenna nuts.
    Quick View

  • Automotive Bubble Flare Kit

    $30.00

    Part No: 155

    Automotive Bubble Flare Kit

    $30.00

    The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.

    • In-Line 4.75mm Bubble Faring Tool Kit
    • Makes Bubble flares on 4.75mm soft steel or copper tubing
    • Inline design for factory quality flares and tight access applications
    • Bars directly clamp over tubing for no push through
    • Clamp and hex sleeve work together to ensure perfectly symmetrical flares
    • Patent pending

    UPC: 047084001554
    Shipping Weight: .7lbs

    Quick View

  • Automotive In-Line Flaring Tool

    $24.00

    Part No: 161

    Automotive In-Line Flaring Tool

    $24.00

    The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE 164 Metric 154 and Auto-Specific Set 161
    • Patent Pending

    UPC: 047084001615
    Shipping Weight: .75lbs

    161 – In Line Flaring Instructions

    Quick View