Products
Showing 205–216 of 318 resultsSorted by average rating
-
Tamper Resistant Square Drive Torx Bit Set
$32.63Part No: 913
Tamper Resistant Square Drive Torx Bit Set
$32.63- Contains nine of the most popular tamper resistant square drive bits.
- 1/4″ drive
- Sizes included: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, and T-50
Quick View -
Extra-Long Torx Screwdriver Set
$49.45Part No: 912
Extra-Long Torx Screwdriver Set
$49.45The Extra Long Torx Screwdriver Set has an extra long shaft for hard-to-reach areas.
- Shaft made of S-2 steel with chrome finish for strength and durability
- Comfortable ergonomic handle
- Handle length: 4.47″
- Shaft length:
- T-10, T-15, T-20, T-25 : 9.75″
- T-27 and T-30: 11.65″
- Set Includes: T-10, T-15, T-20, T-25, T-27, and T-30
UPC: 047084009123
Shipping weight: 2.3lbs912 Extra Long Torx Screwdriver Set Breakdown
912 Extra Long Torx Screwdriver Set Flyer
Also available: 917 Extra Long Torx Screwdriver Set, Tamper-Proof
Quick View -
Heavy-Duty Truck Oil Filter Wrench 5-5/32″ to 5-21/32″
$35.16Part No: 893
Heavy-Duty Truck Oil Filter Wrench 5-5/32″ to 5-21/32″
$35.16Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
- Use with 1/2″ square drive tool.
- Fit fits filters 5-5/32″ to 5-21/32″ (130mm-143mm) in diameter
UPC: 047084008935
Shipping weight: 1.15lbAlso available:
Quick View -
Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″
$39.84Part No: 892
Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″
$39.84Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
- Use with 1/2″ square drive tool.
- Fits filters 4-21/32″ to 5-5/32″ (118mm-130mm) in diameter
UPC: 047084008928
Shipping weight: 1.2lbAlso available:
Quick View -
Heavy-Duty Truck Oil Filter Wrench 4-1/8″ to 4-21/32″
$39.84Part No: 891
Heavy-Duty Truck Oil Filter Wrench 4-1/8″ to 4-21/32″
$39.84Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
- Use with 1/2″ square drive tool
- Fits filters 4-1/8″ to 4-21/32″ (105mm-118mm) in diameter
UPC: 047084008911
Shipping weight: 1.15lbsAlso available:
Quick View -
Brake Bleeder Tank
$183.21Part No: 855
Brake Bleeder Tank
$183.21This lightweight and easy-to-use, portable tank fills and bleeds both standard and power brakes in a single operation. Tank is easily pressurized with just a few strokes of the built-in hand pump.
- Eliminates the need for a compressor
- One (1) gallon capacity features extra-long hose, quick disconnect coupler, shut-off valve and pressure gauge
UPC: 047084008553
Shipping weight: 5.4lbs855 – Brake Bleeder Tank Manual
Quick View -
6PT and 12PT Flex Oxygen Sensor Wrench
$38.46Part No: 844CV
6PT and 12PT Flex Oxygen Sensor Wrench
$38.46The combination 12 & 6-Point Flexible Oxygen Sensor Wrench Model is designed for use with most oxygen sensors. The double-sided design allows the technician easier access with the 12-point socket and more torque with 6-point for rusted or stubborn sensors.
- Gives technicians access to remove sensors in difficult areas.
- Offset, low-profile design allows more room and leverage in confined areas
- Incorporates a harness pass-thru in socket
UPC: 047084008447
Shipping weight: .95lb844 Oxygen Sensor Wrench Flyer
Also available:
843 – 6PT Oxygen Sensor WrenchQuick View -
6PT Oxygen Sensor Wrench
$37.36Part No: 843CV
6PT Oxygen Sensor Wrench
$37.36The Flex head design offers essential clearance for removal or installation of oxygen sensors when it is positioned upward and inward to the floorboard or when leverage is needed around an exhaust pipe.
- Designed for all oxygen sensors with 7/8″ hex.
- For numerous applications including Ford® Contours 4.6L and 5.4L Ford® Modular engines
- Also works on 7/8″and 22mm knock sensors used on mid-sized trucks, SUVs, and vans.
- Incorporates a harness pass-thru in socket
UPC: 047084008430
Shipping weight: .9lb843 Oxygen Sensor Wrench Flyer
Also available:
844 – 6PT and 12PT Flex Oxygen Sensor WrenchQuick View -
7 PC Oxygen Sensor Socket Set
$75.82Part No: 842CV
7 PC Oxygen Sensor Socket Set
$75.82A comprehensive socket set that enables technicians to easily install or remove oxygen sensors, vacuum switches, and oil pressure sending units on a wide variety of domestic vehicles and imports.
- Provides a method of removal and installation without damage to the sensor
- This versatile set includes SAE and metric sockets for the most common applications
- Includes:
- 7/8″ – Vacuum Switch Socket
- 7/8″ – Oxygen Sensor Socket Short
- 7/8″ – Oxygen Sensor Socket Long
- 1″ – Oil Pressure Sending Unit Socket
- 1-1/16″ – Oil Pressure Sending Unit Socket
- 27 mm – Oil Pressure Sending Unit Socket
- 29 mm – Vacuum-Pressure Switch Socket
UPC: 047084008423
Shipping weight: 4.55lbsQuick View -
6 PC 4WD Locknut Socket Set
$152.84Part No: 839CV
6 PC 4WD Locknut Socket Set
$152.84This high-quality steel, six-piece socket set features 1/2” square drives that enable technicians to use ratchets, breaker bars, and torque wrenches in their applications. This convenient set will cover the most common light truck and SUV applications and includes:
- 4-lug socket
- 6-lug socket
- GM® locknut socket
- Toyota® 4-lug locknut socket
- Ford® 4-lug locknut socket
- FWD front spindle puller
UPC: 047084008393
Shipping weight: 13.15lbsQuick View -
Universal Strap Oil Filter Wrench
$10.68Part No: 814
Universal Strap Oil Filter Wrench
$10.68This filter wrench adjusts quickly to any spin-on filter up to 6″ in diameter.
- 2″ wide
- Strong nylon web belt will not slip
- Use with 1/2″ square drive wrench
UPC: 047084008140
Shipping weight: .6lbsQuick View -
Heavy-Duty Strap Oil Filter Wrench
$36.26Part No: 803
Heavy-Duty Strap Oil Filter Wrench
$36.26This deluxe wrench adjusts quickly to any spin-on filter up to 9″ (228mm) in diameter.
- Features 3/8″ and 1/2″ forged driver
- Heavy-duty strap for high torque requirements
UPC: 047084008034
Shipping weight: .7lbsQuick View
