Products
Showing 73–84 of 319 resultsSorted by price: low to high
-
45 Degree Gearless Angle Drive 1/4″
$21.54Part No: 485
45 Degree Gearless Angle Drive 1/4″
$21.54- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
UPC: 047084004852
Shipping Weight: .25lbsAlso available:
482 – 90 Degree Gearless Angle Drive 1/4″
483 – 90 Degree Gearless Angle Drive 3/8″Quick View -
Inner Tie Rod Removal Tool
$22.23Part No: 946
Inner Tie Rod Removal Tool
$22.23The Inner Tie Rod Removal Tool, is essential when working with applications when inner tie rods have round ends, but can also be used for rounded with flats, hex end versions and great for inner tie rod ends with damaged surfaces.
- Turns smooth tie rods easily.
- Simply slide tool over the end and tighten collar to allow access with an extension.
- Can remove Inner tie rod without removing the outer tie rod
- No more bulky tool to store.
- Inexpensive and effective way to turn these smooth tie rod ends.
UPC: 047084009468
Shipping weight: .75lbQuick View -
Tie Rod End Puller
$22.52Part No: 194
Tie Rod End Puller
$22.52Designed to easily separate tie rod ends and separate pitman arms from steering gears. Can be used to remove both tie rod ends and pitman arms on many small domestic rear wheel drive cars and light trucks.
- Cap screw has a 3/8″ Female drive
- 1-15/16″ of pull travel and over 1″ of jaw opening
- Replacement center screw: Part 194-1
UPC: 047084001943
Shipping Weight: 1lbQuick View -
Subaru® Stretch Belt Installer
$22.66Part No: 737
Subaru® Stretch Belt Installer
$22.66- All 2008 to current models of Subaru® Impreza, Outback, and Forrester feature a stretch belt.
- When replacing these belts due to access issues traditional tools and even current stretch belt tools will not work.
- Only tool on the market for this job
UPC: 047084007372
Shipping weight: .15lbQuick View -
6″ Magnetic Tool Box Shelf
$23.08Part No: 90941CV
6″ Magnetic Tool Box Shelf
$23.08The 6″ Inch magnetic toolbox shelf tray comes with heavy duty, non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds fasteners, small parts, and tools by any work area, with a 4.51lbs holding weight capacity. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.
• Heavy Duty non-marring rubber coated magnets
• Industrial Grade powder coating finish resist rust and corrosion
• 6 inch tray holds various items
• 4.51LBS Weight CapacityUPC: 047084909416
Shipping weight: 1.25lbsQuick View -
Brake Line Bending Tool
$23.50Part No: 76110CV
Brake Line Bending Tool
$23.50The 76110, Brake line bending tool, is designed to align, bend and adjust brake lines up to 3/6″/4.75MM in diameter. Comes with two 90 degree bending width options and a 6MM female hex slot for a secure hold while bending brake lines. Ergonomic design is suitable for one-handed operation.
- Design to bend brake lines with a 3/16″ – 4.75mm maximum diameter
- Fitted with a 15/64″ – 6mm hex slot for holding and bending brake lines
- Two 90 degree bending width options
- Coated with an anti-corrosion electrophoretic black paint
- Ergonomic design is suitable for one handed operation
- Compact features allows user to complete brake line bends in tight fitting applications
UPC: 047084761106
Shipping Weight: .35lbsAlso available:
75902 – Tube Bend Mirror AdaptersQuick View -
Automotive In-Line Flaring Tool
$24.00Part No: 161
Automotive In-Line Flaring Tool
$24.00The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.
- Make Perfect Flares Every Time!
- Use to make single and double flares
- Low profile design allows for use on or off the vehicle
- Designed to be used with a ratchet to make flares easier
- In line design makes a more accurate flare
- Double clamp and hex screw design keeps tubing locked tightly in position
- For use on thin walled steel and copper tubing
- Patent Pending
UPC: 047084001615
Shipping Weight: .75lbs161 – In Line Flaring Instructions
Also available:
154 Metric In-Line Flaring Tool
155 Automotive Bubble Flare Kit
156 Metric In-Line Bubble Flaring Kit
164 Automotive In-Line Flaring Tool
165 Master In-Line Flaring SetQuick View -
DEBURRING CHAMFER TOOL BIT
$24.00Part No: 49100CV
DEBURRING CHAMFER TOOL BIT
$24.00Designed to clean and repair damaged bolts and fasteners. Can be used for hard steel applications with lubricating oil to improve tool performance. NOT recommended for use with Impact driver.
- Applicable for use on threads from 1/4″ to 3/4″ in diameter.
- 72 Degree deburring capacity
- 3-HSS blades
- 1/4″ bit Dr. to fit any drill type
UPC: 047084491003
Shipping Weight: .16lbsQuick View -
6 PC 9-3/4″ Hook and Pick Set
$24.38Part No: 22CV
6 PC 9-3/4″ Hook and Pick Set
$24.38Remove and retrieve O-rings, gaskets, or many other items with precision and ease using this hook and pick set. Plenty of grip when you most need it most with textured, cushioned grips, even when hands are wet or covered with oil.
• Use to remove O-rings, wadding, springs, gaskets, etc.
• Retrieve items from tight or hard to reach areas
• Heat-treated and polished, high-carbon steel picks
• Cushioned and textured handles provide grip
• Mark plastic or metal surfacesUPC: 047084000229
Shipping Weight: .41lbsAvailable on backorder
Quick View -
360 Degree Quick Disconnect Tool
$24.99Part No: 68600CV
360 Degree Quick Disconnect Tool
$24.99This handy quick disconnect tool allows the user to remove a two button type quick connector with one hand operation and easy to use in tight access applications. Multi angle design with a soft grip handle and durable curved jaws for easy and comfortable operation.
• Multi angle design with anti slip curved jaws
• Compact one handed operation for tight access applications
• Curved jaws with anti slip designUPC: 047084686003
Shipping weight: .125lbsQuick View -
Body Clip Pliers
$25.00Part No: 55CV
Body Clip Pliers
$25.00No need to buy 3 sets of trim clip pliers for different applications, this one does it all. These specially designed and patented pliers will remove any clip found on trim, bumpers, etc.
- Very popular with Paint and Body.
- Steel levers enclosed in PMS plastic prevents scratches
- Tips have a special angle and size that make them the most versatile tool in the clip removal category
- These clips are found on almost every vehicle inside and out.
- Patent pending.
UPC: 047084000557
Shipping Weight: .3lbsAlso available:
56 Recessed Body Clip PliersQuick View -
Pistol Grip LED Lighted Screwdriver
$25.00Part No: 668
Pistol Grip LED Lighted Screwdriver
$25.00- Screw driver can either be a straight-grip or pistol-grip screwdriver
- Removable shank for use with other drivers
- LED light on handle for dark areas
- Bits stored in handle
- Professional quality, high-torque screwdriver
UPC: 047084006689
Shipping weight: .65lbsQuick View
