CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

  • 7 oz Multi-Purpose Fluid Extractor Kit

    7 oz Multi-Purpose Fluid Extractor Kit

    $34.50

    Part No: 85610CV

    7 oz Multi-Purpose Fluid Extractor Kit

    $34.50

    The 7 oz Multi-purpose fluid extractor is made from heavy-duty, chemical resistant, polypropylene plastic. Ideal to extract oil, brake, steering fluids and anti-freeze. Includes two quick connect extension tubes for hard to reach areas and deep fluid reservoir found on all vehicles types.

    • Will hold 7 oz.
    • Dual measurement scale on tube determines fluid levels easily
    • Safe for brake, steering, and other fluids, including anti-freeze
    • Includes two quick connect extension tubes for hard to reach areas and deep fluid reservoirs
    • Syringes are washable

    UPC: 047084856109
    Shipping Weight: .65lbs

    85610CV Breakdown

    85610 7 oz Multi-Purpose Fluid Extractor Flyer

    Also available:
    85620 – 17 oz Multi-Purpose Fluid Extractor Kit
    85630 – 1.5 Liter Multi-Purpose Fluid Extractor Kit

    Quick View
  • 6PT and 12PT Flex Oxygen Sensor Wrench

    6PT and 12PT Flex Oxygen Sensor Wrench

    $35.00

    Part No: 844CV

    6PT and 12PT Flex Oxygen Sensor Wrench

    $35.00

    The combination 12 & 6-Point Flexible Oxygen Sensor Wrench Model is designed for use with most oxygen sensors. The double-sided design allows the technician easier access with the 12-point socket and more torque with 6-point for rusted or stubborn sensors.

    • Gives technicians access to remove sensors in difficult areas.
    • Offset, low-profile design allows more room and leverage in confined areas
    • Incorporates a harness pass-thru in socket

    UPC: 047084008447
    Shipping weight: .95lb

    844 Oxygen Sensor Wrench Flyer

    Also available:
    843 – 6PT Oxygen Sensor Wrench

    Quick View
  • 4 PC Oil Pan Plug Remover

    4 PC Oil Pan Plug Remover

    $35.00

    Part No: 38200CV

    4 PC Oil Pan Plug Remover

    $35.00

    Many Late model Ford®, Volkswagen®, Audi® and BMW® have a plastic oil pan and plastic drain plug. This tool set is specially designed to slot in and release these plugs found on many late model Ford®, Volkswagen®, Audi® and BMW® vehicles.

    • Revised to include Ford®/Lincoln® plastic oil pan drain plugs of engines: 2.7L / 2.7L (2018) / 3.0L / 3.3L / 3.5L Turbo from 9-12-2018 / 5.0L (2018)
    • Adapters will not damage drain plugs
    • Designed to slot in and easily release these plugs
    • Set comes in a hard case for easy storage

    UPC: 047084382004
    Shipping weight: .69lbs

    38200 4 PC Oil Pan Plug Remover Flyer

    Quick View
  • Ford® Harmonic Balancer Holder

    Ford® Harmonic Balancer Holder

    $35.00

    Part No: 38110CV

    Ford® Harmonic Balancer Holder

    $35.00

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford® engines, or it can be used to turn the engine when doing timing work. The studs of the tool go into the open spans of the harmonic balancer to apply force against them, while a 1/2″ drive ratchet or breaker bar is inserted into the knockout hole of the face plate for leverage. The open faceplate allows a socket to be applied to the retaining bolt of the balancer. While holding the balancer in place, the bolt can be loosened or tightened without the crankshaft turning with it. This tool can also be utilized to turn the engine when a procedure requires alignment of timing marks.

    • Designed to fit multiple Ford® vehicles ranging from 1992 – 2016
    • The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
    • The ½” drive knockout allows for the use of a ratchet or breaker bar
    • Ideal for rotating the engine for timing-related jobs
    • Will not warp balancer
    • Heavy-duty construction

    UPC: 047084381106
    Shipping weight: 1.19lbs

    38110 Ford Harmonic Balancer Holder Flyer

    Quick View
  • Stud Remover

    Stud Remover

    $35.72

    Part No: 19

    Stud Remover

    $35.72

    This powerful stud removing tool is designed to remove rusted, broken, seized bolts and studs with ease. Ideal use in tight access and hard to reach applications. Has a capacity range of 1/4″ up to 3/4″ (6MM to 19MM) diameter or bolt. Roller assembly grips like a pipe wrench and uses a cam action to grasp material firmly for removal. Use with a 1/2″ Dr. ratchet or breaker bar.

    FEATURES

    • This powerful tool is designed to fit into hard-to-reach spots and to remove hard-to-turn studs.
    • Will remove broken studs with threads with material above the surface.
    • Capacity from 1/4″ – 3/4″ (6-19mm) diameter.
    • Zinc plated.
    • Roller assembly grips like a pipe wrench.
    • Works with a 1/2″ drive

    UPC: 047084000199
    Shipping Weight: 1.25lbs.

    Quick View
  • Disc Brake Pad Spreader

    Disc Brake Pad Spreader

    $35.72

    Part No: 703

    Disc Brake Pad Spreader

    $35.72
    • Used for easy efficient brake pad installation
    • Works on all standard and four-piston caliper disc brakes
    • Cuts installation time dramatically
    • Tool fits between the two new pads being installed then expands to retract the piston
    • Leaves both hands free to slide the caliper over the rotor
    • After it’s started, the spreader is removed and you can slide the caliper over the rotor

    UPC: 047084007037
    Shipping weight: .6lbs

    Quick View
  • Pitman Arm Puller

    Pitman Arm Puller

    $35.80

    Part No: 186CV

    Pitman Arm Puller

    $35.80

    Heavy duty tool is designed to remove pitman arms from late model cars and light trucks.

    • Yoke is forged from high grade alloy steel and heat treated.
    • 1-5/16” opening 2-1/2″ pull
    • Replacement yoke: Part #186-100

    UPC: 047084001868
    Shipping Weight: 2lbs

    Quick View
  • 2 Valve Replacement Insert

    2 Valve Replacement Insert

    $35.85

    Part No: 389-100

    2 Valve Replacement Insert

    $35.85

    Replacement insert for the 2 Valve Ford® Triton Engine kit, part 38900.

    • 14mm x 1.25
    • 3/4″-16 OD
    • Works with Ford® Triton Motors ’96 – ’03
    • Sold individually
    • Steel alloy with black oxide finish

    UPC: 047084389102
    Shipping Weight: .05lbs

    Quick View
  • Dodge® Hub Removal Tool

    Dodge® Hub Removal Tool

    $35.95

    Part No: 90701CV

    Dodge® Hub Removal Tool

    $35.95

    Uses the force from the vehicle’s power steering system to easily free the front wheel hubs, without damaging the hub or other components.

    • Designed to remove the front hubs of 3/4-ton (2500) and 1-ton (3500) Dodge trucks
    • Reduces the time it takes to complete front-end related jobs such as hub removal, replacing axle shafts, U-joint, and axle seals
    • Replaces the 90300CV

    UPC: 047084907016
    Shipping weight: 1.04lbs

    Quick View
  • Subaru Crank Pulley Tool

    Subaru Crank Pulley Tool

    $36.00

    Part No: 198

    Subaru Crank Pulley Tool

    $36.00

    The use of this tool eliminates the need to remove the radiator to make space for an impact wrench. Time is saved by not having to refill and bleed the air out of the cooling system when changing a timing belt.

    • Tool designed to hold harmonic balancer for removal and installation.
    • This tool combines the individual tools available into one tool, while also increasing applications.
    • Applications: 1.8L, 2.2L, 2.2L Turbo, and 2.5L Subaru motors

    UPC: 047084001981
    Shipping Weight: 2.1lbs

    Quick View
  • Heavy-Duty Truck Oil Filter Wrench 4-1/8″ to 4-21/32″

    Heavy-Duty Truck Oil Filter Wrench 4-1/8″ to 4-21/32″

    $36.25

    Part No: 891

    Heavy-Duty Truck Oil Filter Wrench 4-1/8″ to 4-21/32″

    $36.25
    • Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
    • Use with 1/2″ square drive tool
    • Fits filters 4-1/8″ to 4-21/32″ (105mm-118mm) in diameter

    UPC: 047084008911
    Shipping weight: 1.15lbs

    Also available:

    Quick View
  • Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″

    Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″

    $36.25

    Part No: 892

    Heavy-Duty Truck Oil Filter Wrench 4-21/32″ to 5-5/32″

    $36.25
    • Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
    • Use with 1/2″ square drive tool.
    • Fits filters 4-21/32″ to 5-5/32″ (118mm-130mm) in diameter

    UPC: 047084008928
    Shipping weight: 1.2lb

    Also available:

    Quick View