Products
Showing 157–168 of 317 results
-
Ford® 6.0L Diesel Head Bolt Adapter
$33.81Part No: 171CV
Ford® 6.0L Diesel Head Bolt Adapter
$33.81Save time and money when removing and installing head bolts on Ford® 6.0L diesel engines. There is no longer a need to remove the cab, worry about the rear heat shield or to disturb the A/C system with the access you with gain with this adapter.
- Designed to loosen and tighten diesel head bolts on 6.0L Powerstroke® diesel engines
- Offset of the adapter increases torque for loosening stubborn fasteners
- The low-profile allows for easy access to head bolts without the need to remove multiple engine components, saving time
- Reduces the overall time to complete engine work related to removing and installing cylinder heads
- Get access to the cylinder head bolts without the need to remove the cab or dealing with freon recovery when removing the evaporator
- ¾” Dr Female adapter with ½” Dr. Male
UPC: 047084001714
Shipping Weight: .99lbsQuick View -
Ford® & Mazda® Engine Valve Timing Kit
$53.15Part No: 38300
Ford® & Mazda® Engine Valve Timing Kit
$53.15This easy alignment tool takes place of pins needed in similar tools. Pins can be hard to access and add time to job in cases where other components are needed. This also eliminates the user error with pins that can lead to pins being bent and stuck.
- For servicing the timing belt chains, head gaskets, or other valve train repairs on Ford®, Mercury®, and Mazda vehicles
- Applications: 2.0L DOHC Zetec engines found in 1994-2003 Ford® and Mercury® vehicles and 2004-2012 2.5L DOHC, 2.3L DOHC 4V, and 2.0L DOHC engines that are found in Ford®, Mercury®, and Mazda® vehicles
- Easy alignment tool is screwed into sparkplug hole and turned by wrench to align cams.
- Tool positions number 1 cylinder to top dead center by holding number 2 or 3 cylinder to bottom dead center
UPC: 047084383001
Shipping weight: 1.45lbsQuick View -
Ford® & Mazda® Crankshaft Holder
$43.96Part No: 38100CV
Ford® & Mazda® Crankshaft Holder
$43.96A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt on many popular Ford® and Mazda® vehicles, or it can be used to turn the engine when doing timing work.
- Adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
- The 1/2″ drive tab allows for the use of a ratchet or breaker bar
- Ideal for timing-related jobs
- Heavy-duty construction and a rust resistant finish
Applications: Ford®/Mazda® 2005 2011 2.0L/2.3L/2.5L (including some Mercury® and Volvo® applications) (Hybrid models also)
Models: Ford® Focus, Fusion, Escape, Ranger, Transit; Mazda® MX 2,MX 3, MX 5, MX 6; CX 5, CX 9; Mercury® Milan, MKZ, MarinerUPC: 047084381007
Shipping Weight: 1.69lbsQuick View -
Ford Radio Remover Tool
$8.51Part No: 135
Ford Radio Remover Tool
$8.51- Tool inserts into holes on radio face to release retaining clips.
- Fits Ford vehicles 1987 to current.
- Makes removal fast and easy.
UPC: 047084001356
Shipping Weight: .75lbsQuick View -
Fluted Screw Extractor Set
$18.68Part No: 441
Fluted Screw Extractor Set
$18.68Made from forged alloy steel, this this tapered style extractor can be used to extract broken studs, screws, pipe and pipe fittings.
- Has gradual taper and long flutes.
- Available as individuals:
Part 441-1 – For Removing Screw/Stud/Bolt – 1/4″, 5/16″
Part 441-2 – For Removing Screw/Stud/Bolt – 3/8″
Part 441-3 – For Removing Screw/Stud/Bolt – 7/16″
Part 441-4 – For Removing Screw/Stud/Bolt – 1/2″, 9/16″
Part 441-5 – For Removing Screw/Stud/Bolt – 5/8″
UPC: 047084004418
Shipping Weight: .3lbsQuick View -
Floor Mounted Strut Spring Compressor
$390.72Part No: 91300
Floor Mounted Strut Spring Compressor
$390.72This product is suitable for all cars, light-trucks, vans, and SUV’s. Its practicality, operability, simplicity and the use of security, have unique advantages. The use of supporting a variety of handles, will be able to complete the installation of the shock absorber and spring installation and relaxation, with only a one person operation.
- Adaptive Spring Bracket can be configured in multiple configurations
- For strut assemblies with spring coils 3.5″ – 8.75″ wide
- Accepts maximum spring height of 19″
- Can be used with varying coil diameters up to 5/8″
- Compresses struts up to 2,200lbs
- Easy, one-person use
- Can be mounted to the floor (hardware not provided)
UPC: 047084913000
Shipping weight: 72lbs91300CV Strut Spring Inner Carton Breakdown
Quick View -
Flange Type Axle & Front Wheel Hub Puller
$48.64Part No: 526
Flange Type Axle & Front Wheel Hub Puller
$48.64- For use on domestic and import cars and light trucks.
- Range is 3-3/4″ – 4-1/2″
- For use on 4, 5, or 6 bolt stud design and all non-C Lock GM axles.
UPC: 047084005262
Shipping Weight: 2.95lbsQuick View -
Extra-Long Torx Screwdriver Set, Tamper-Proof
$49.45Part No: 917
Extra-Long Torx Screwdriver Set, Tamper-Proof
$49.45- Extra long shaft for hard-to-reach areas
- Shaft made of S-2 steel with chrome finish for strength and durability
- Comfortable ergonomic handle
- Tamper proof design
- Set Includes: T-10, T-15, T-20, T-25, T-27, and T-30.
UPC: 047084009178
Shipping weight: 2.05lbs917 Tamperproof Extra Long Torx Screwdriver Set Breakdown
917 Extra Long Tamper-proof Torx Screwdriver Set Flyer
Also available: 912 Extra-Long Torx Screwdriver Set
Quick View -
Extra-Long Torx Screwdriver Set
$49.45Part No: 912
Extra-Long Torx Screwdriver Set
$49.45- Extra long shaft for hard-to-reach areas.
- Shaft made of S-2 steel with chrome finish for strength and durability
- Comfortable ergonomic handle
- Handle length: 4.47″
- Shaft length:
- T-10, T-15, T-20, T-25 : 9.75″
- T-27 and T-30: 11.65″
- Set Includes: T-10, T-15, T-20, T-25, T-27, and T-30
UPC: 047084009123
Shipping weight: 2.3lbs912 Extra Long Torx Screwdriver Set Breakdown
912 Extra Long Torx Screwdriver Set Flyer
Also available: 917 Extra Long Torx Screwdriver Set, Tamper-Proof
Quick View -
Extra Long Ratcheting Chain Wrench
$60.44Part No: 87000CV
Extra Long Ratcheting Chain Wrench
$60.44This versatile tool combines a heavy-duty 24″ chain to grip nearly any shape round, square, or otherwise and a knurled, chrome-plated 20″ handle to provide leverage to loosen almost anything, even in tight working spaces.
• Use to grip nearly any round or multifaceted object 3″ – 6.75″ in diameters, such as pipe, conduit, or other various items
• Robust, 20″ chrome-plated and knurled handle provides enough leverage for even the most stubborn items
• Quickly adjusts for another turn without removing the tool or resetting the chain
• Easy to reverse direction, loosen the chain, flip the handle, and seat the chainUPC: 047084870006
Shipping Weight: 4.9lbsQuick View -
Extended Razor Blade Scraper
$13.66Part No: 717
Extended Razor Blade Scraper
$13.66- 12″ (305mm) long extended-reach inspection sticker remover is a must for long sloped windshields
- Blade clamp is screw-tightened to prevent the blade from popping out
- Includes: One Poly guard blade and two standard single-edge blades inside storage handle.
UPC: 047084007174
Shipping weight: .35lbsQuick View -
Exhaust Tail Pipe Cutter
$53.85Part No: 764
Exhaust Tail Pipe Cutter
$53.85- Comprised of thirteen, large diameter (19mm) cutting wheels that cut deep into exhaust pipes.
- Will not leave burrs.
- Ideal for heavier-walled European-type exhaust pipes.
- Cuts pipe from 3/4″ to 3-1/4″ (19mm – 83mm) in diameter.
- Only 1/4″ turn needed to cut.
- Works well in hard to reach places.
UPC: 047084007648
Shipping weight: 1.2lbsQuick View
