Products
- You cannot add "Light Duty Slide Hammer and Puller Set, 14 Piece" to the cart because the product is out of stock.
Showing 241–252 of 310 results
-
Coil Spring Compressor
$82.00Part No: 510
Coil Spring Compressor
$82.00FEATURES
- This tool removes and installs coil springs quickly and safely
- Compress coil springs on all passenger cars and pick-up trucks
- Instructions included
- Not for use with impact tools
This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.
Quick View -
Bushing Driver Set
$80.00Part No: 504
Bushing Driver Set
$80.00FEATURES
- Remove or install bushings from 3⁄8” to 13⁄8” in diameter. Found in cars trucks tractors construction equipment electric motors and many other components containing bushings.
- Includes sixteen bushing adapters ranging from 3⁄8” to 13⁄8” large medium and small driver handles.
- Comes in a blow-molded storage case.
Quick View -
Bearing Splitter, 4 1/4″ Capacity
$61.65Part No: 503
Bearing Splitter, 4 1/4″ Capacity
$61.65FEATURES
- For removing generator gears bearing cones bearings and similar parts that ordinary puller jaws cannot reach.
- Knife edges are flush on one side for easy pulling. Bolts are heat treated for added strength.
- No. 503 Bearing Splitter for use with Puller
- No. 943 Capacity: 0″ to 41⁄4” (108mm) 5⁄8, 18 Holes
Quick View -
Puller Bearing Separator Set, 5 Ton/ Bar Type
$134.88Part No: 502
Puller Bearing Separator Set, 5 Ton/ Bar Type
$134.88FEATURES
- Set includes two popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw
- Separator tools are used with bar puller and legs for a wide variety of pulling jobs
- The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools
Quick View -
7-Ton Bar Type Puller Bearing Separator Set
$174.92Part No: 501
7-Ton Bar Type Puller Bearing Separator Set
$174.92FEATURES
- Includes a Bearing Splitter with 4″ capacity two sets of hex push puller legs a 8″ bar type puller head mated with a custom thread forcing screw
- Professionals have a Puller-Bearing set for hard jobs up to 7-tons larger applications and a greater reach 8″ to 16″
Quick View -
Twin Spin Drive Converter 3/8″ – 1/2″
$19.28Part No: 489
Twin Spin Drive Converter 3/8″ – 1/2″
$19.28FEATURES
- Can be used to use a 3/8 in. drive socket on a 1/2in. ratchet or a 1/2in. drive socket on a 3/8in. ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
Available on backorder
Quick View -
Twin Spin Drive Converter 1/4″ – 3/8″
$18.45Part No: 488
Twin Spin Drive Converter 1/4″ – 3/8″
$18.45FEATURES
- Can be used to use a 1/4 in. drive socket on a 3/8in. ratchet or a 3/8in. drive socket on a 1/4in. ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
Quick View -
90 Degree Gearless Angle Drive 3/8″
$16.00Part No: 483
90 Degree Gearless Angle Drive 3/8″
$16.00FEATURES
- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
Quick View -
90 Degree Gearless Angle Drive 1/4″
$16.00Part No: 482
90 Degree Gearless Angle Drive 1/4″
$16.00FEATURES
- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
Quick View -
1/2″ Drive Extendable Breaker Bar
$69.00Part No: 480
1/2″ Drive Extendable Breaker Bar
$69.00FEATURES
- Extends from 15 to 25
- Excellent for mobile technicians allowing them to fit the bar in regular carry tool boxes.
- Tested in Independent lab to destruction of 6800 inch pounds. Some tested as high as 8000 inch pounds.
- Patented
Quick View -
Tight Access Drive Wrench
$32.00Part No: 450
Tight Access Drive Wrench
$32.00FEATURES
- A gear-driven metric wrench set solution for tight access areas!
- Gear driven to gain easy access to tight areas where a box type wrench would not be practical.
- Dramatically reduce time needed to remove fasteners in awkward areas.
- Comes in a set of five 10mm, 12mm, 13mm, 14mm, 15mm w-blow molded case.
- Includes adapter for use with 3⁄8” sockets.
- A real time saver.
- Patented.
Quick View -
Fluted Screw Extractor Set
$17.00Part No: 441
Fluted Screw Extractor Set
$17.00FEATURES
- Forged alloy steel this this tapered style extractor can be used to extract broken studs screws pipe and pipe fittings.
- Has gradual taper and long flutes.
- Available as individuals:
No. 441-1 – For Removing Screw/Stud/Bolt 1⁄4, 5⁄16
No. 441-2 – For Removing Screw/Stud/Bolt 3⁄8
No. 441-3 – For Removing Screw/Stud/Bolt 7⁄16
No. 441-4 – For Removing Screw/Stud/Bolt 1⁄2, 9⁄16
No. 441-5 – For Removing Screw/Stud/Bolt 5⁄8
Quick View