CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Bearing Pullers and Separators

  • 7-Ton Bar Type Puller Bearing Separator Set

    7-Ton Bar Type Puller Bearing Separator Set

    $174.92

    Part No: 501CV

    7-Ton Bar Type Puller Bearing Separator Set

    $174.92
    • Includes a Bearing Splitter with 4″ capacity, two sets of hex push puller legs, and a 8″ bar type puller head mated with a custom thread forcing screw
    • Professionals have a Puller-Bearing set for hard jobs up to 7-tons
    • Larger applications and a greater reach 8″ to 16″

    UPC: 047084005019
    Shipping Weight: 17.05lbs

    501 – Bearing Separator and Puller Set Breakdown

    Quick View
  • Heavy-Duty Bearing Cup Installer

    Heavy-Duty Bearing Cup Installer

    $165.00

    Part No: 20300CV

    Heavy-Duty Bearing Cup Installer

    $165.00

    Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints. The press plate and specific adapters make proper installation easy every time while also reducing the risk of damage to the driveshaft, yokes, and joints.

    • Three adapters to fit SPL 140, 170, 250 Series drivelines
    • Use on quick disconnect universal joint only
    • Safer alternative to makeshift methods
    • Can be used with hand and air tools
    • Great partner tool for Heavy Duty U-Joint Puller (Part No.199) and Heavy Duty Yoke Puller (Part No. 497)
    • Applications:
      • Dana®/Spicer® SPL 140, 170, and 250 Series U-joints found in class 6-8 commercial vehicles and equipment

    UPC: 047084203002
    Shipping weight: 12.5lbs

    20300CV Heavy Duty Bearing Cup Installer Instructions

    20300 Heavy Duty Bearing Cup Installer Replacement Parts

    20300 Heavy Duty Bearing Cup Installer Flyer

    Quick View
  • Bearing Splitter, Large

    Bearing Splitter, Large

    $145.00

    Part No: 511

    Bearing Splitter, Large

    $145.00

    Designed to pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.

    • Designed to remove and pull bearings in tight areas
    • Capacity 4″ – 6″
    • Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
    • Split and separate bearings where puller jaws cannot be used
    • Made from industrial strength steel
    • Universal application
    • Max spread: 8.375″

    UPC: 047084005118
    Shipping weight: 12lbs

    511 Breakdown

    Quick View
  • 10 Ton Push Puller

    10 Ton Push Puller

    $139.95

    Part No: 18100CV

    10 Ton Push Puller

    $139.95

    The 10 Ton Push Puller is designed to push or pull depending on how the puller is set up. Ideally to be used with various pulling attachments when needing to remove press fitted parts such as bearings, gears and other components.

    • Designed to remove and install press to fit parts, gears, bearing and shafts
    • Can be used with bearing pullers and pulley pulling attachments
    • 10 Ton Capacity
    • Cross Bar spread range 2-1/8″-7-1/4″
    • Maximum reach of 8-1/4″
    • Heavy Duty Truck Applications

    UPC: 047084181003
    Shipping weight: 7.25lbs

    18100 – Cal-Van Instructions

    18100 10-Ton Push Puller Flyer

    Quick View
  • 5-Ton Bar Type Puller Bearing Separator Set

    5-Ton Bar Type Puller Bearing Separator Set

    $134.88

    Part No: 502CV

    5-Ton Bar Type Puller Bearing Separator Set

    $134.88
    • Set includes two popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw
    • Separator tools are used with bar puller and legs for a wide variety of pulling jobs
    • The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools

    UPC: 047084005026
    Shipping Weight: 10.3lbs

    502 Breakdown

    Quick View
  • Bearing Splitter, Medium

    Bearing Splitter, Medium

    $81.77

    Part No: 509CV

    Bearing Splitter, Medium

    $81.77

    Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.

    • Capacity 3″ to 4-1/2″
    • Split and separate bearings where puller jaws cannot be used
    • Made from industrial strength steel
    • 3 Ton Capacity

    UPC: 047084005095
    Shipping Weight: 4.29lbs

    509 Breakdown

    Quick View
  • Bearing Splitter, 4 1/4″ Capacity

    Bearing Splitter, 4 1/4″ Capacity

    $61.65

    Part No: 503

    Bearing Splitter, 4 1/4″ Capacity

    $61.65

    For removing generator gears, bearing cones, bearings, and similar parts that ordinary puller jaws cannot reach.

    • Knife edges are flush on one side for easy pulling
    • Bolts are heat treated for added strength

    UPC: 047084005033
    Shipping Weight: 1lb

    Quick View
  • Bearing Splitter, Small

    Bearing Splitter, Small

    $53.74

    Part No: 508CV

    Bearing Splitter, Small

    $53.74

    Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.

    • Capacity 1-1/4″ to 2-1/4″
    • Split and separate bearings where puller jaws cannot be used
    • Made from industrial strength steel

    UPC: 047084005088
    Shipping Weight: 1.33lbs

    508 Breakdown

     

    Quick View