New Products
Showing 37–48 of 55 resultsSorted by price: high to low
-
6.75″ Multi-Grip Electrical Scissors
$32.96Part No: 55203CV
6.75″ Multi-Grip Electrical Scissors
$32.96The 55203 6.75″ Multi Grip Electrician Scissors, are professional-grade electrician’s scissors that provide fit, form and function for any automotive electrical job. Allows user to easily cut through wire, cables, ties, tape and loom.
- High Hardness, precision blades
- Cuts up to 12AWG aluminum/copper wire
- Also cuts cable ties, tape and wire looms
- Integrated cable cutter, cuts soft cable up to 00 (2/0) AWG
- Full Tang, stainless steel frame with anti-slip handles
- Built in stripper and crimper
- Plastic Sheath with belt clip for safe storage
UPC: 047084552032
Shipping weight: .31lbs55200-55203-55206 Electricians Scissors Combined Flyer
Also available:
55200 – 6.25″ Electrician Scissors
55206 – 8″ Angled Electrician ScissorsQuick View -
6.25″ Electrician Scissors
$32.96Part No: 55200CV
6.25″ Electrician Scissors
$32.96The 55200 6.25″ Electrician Scissors are a professional-grade electrician’s scissors. They provide fit, form and function for any automotive electrical job. Allows user to easily cut through wire, cables, ties, tape and loom.
- High Hardness, precision blades
- Cuts up to 12AWG aluminum/copper wire
- Also cuts cable ties, tape and wire looms
- Integrated cable cutter, cuts soft cable up to 0 (1/0) AWG
- Stainless steel frame designed with anti-slip handles
- Built-in stripper and crimper
- Plastic Sheath with belt clip for safe storage
UPC: 047084552001
Shipped weight: .8lbs55200-55203-55206 Electricians Scissors Combined Flyer
Also available:
55203 – 6.75″ Multi-Grip Electrical Scissors
55206 – 8″ Angled Electrician ScissorsQuick View -
Snap Ring Pliers- Straight
$31.84Part No: 49CV
Snap Ring Pliers- Straight
$31.84The U-joint snap ring pliers are designed to remove and replaced U-Joint snap rings, upholstery clips and a multitude of other removal tasks. The unique jaw allows you to grab snap rings on a flat surface and trim clips of all types without damaging them.
- Designed to remove and replace snap rings on universal joints on Hotchkiss drive shafts
- Can be used to remove plastic push pin retainers on several makes and models
- Designed to remove trim pads & insulation
- Unique jaw design allows the user to easily grab snap rings from a flat surface
- Great for removing interior clips and body panel fasteners
- Straight design
UPC: 047084000496
Shipping Weight: .75lbs49 Snap Ring Plier Straight Flyer
Also available:
48 Snap Ring Pliers – 75˚ OffsetQuick View -
Magnetic Field Indicator
$30.76Part No: 82000CV
Magnetic Field Indicator
$30.76A quick and easy way to detect magnetic fields. Just place the tip of the probe on any AC, DC, or permanent magnet, and it will illuminate if a magnetic field is present.
- Diagnose electrical solenoid valves in automotive applications or on pneumatic and hydraulic equipment
- Use to test various solenoids and coiled relays common in many vehicles, oil burners, and machinery
- Can even be used to check audio speaker magnets
- It includes an integrated tester magnet to ensure the device is always working
- Immediately verify an active or inactive ignition coil by putting the tip near the coil.
- A blue LED light will display every time a magnetic field is detected.
- The test tip has a built-in LED flashlight
UPC: 047084820001
Shipping weight: .11lbs82000 – Magnetic Field Indicator Flyer
Available on backorder
Quick View -
Multi-Functional Push Pin & Clip Pliers
$30.76Part No: 68700CV
Multi-Functional Push Pin & Clip Pliers
$30.76The 68700, is designed with an angled head to easily remove multiple types of push pins and trim clips found on most vehicles. Equipped with a cutting function and hole design to grip plastic fasteners without cutting head off. Ergonomic dip handles for a comfortable grip and an added spring to prevent hand fatigue during long periods of use.
- Angled head equipped with a diagonal cutting function and hole design to grip plastic fasteners
- Easily removes multiple types of push pins and trim clips found on most vehicles
- Removes nails and rivet puller
- Ergonomic dip handles for a comfortable grip
- Added spring prevents hand fatigue
UPC: 047084687000
Shipping weight: .5lbsQuick View -
1/2″ Dr. 4 Lug Spindle Nut Socket
$29.99Part No: 83960CV
1/2″ Dr. 4 Lug Spindle Nut Socket
$29.99The 4 Lug Spindle Nut Socket is specially designed to remove and install 4 slot axle nut sockets found in Dana 44, Dana 50 and Dana 60 front axles, 1/2-to-3/4-ton trucks. Will also work on Ford trucks with ratcheting type lock nuts on front axles.
- Remove and install 4 slotted axle lock nuts
- ½” drive
- Fits front wheel retaining nut on Dana 44 series axle, 1959 and later, Dana 50 and Dana 60 front axles
- 1/2-ton vehicles with manual locking nuts
- Not for use with power tools
- Will also work on Ford trucks with ratcheting type lock nuts on front axles
UPC: 047084839607
Shipping weight: 1.75lbsQuick View -
New!
Rectangular Polished Stainless-Steel Telescoping Mirror
$27.99Part No: 27000CV
Rectangular Polished Stainless-Steel Telescoping Mirror
$27.99The Telescopic Polished Stainless-Steel Mirror is designed with a polished stainless-steel mirror instead of a traditional glass mirror. Handle can be extended from 6″ to 25″ to provide easier access to hard reached engine compartments.
- Telescopic handle extends from 6″ to 25″
- Provides user with easy access to see hard-to-reach areas
- Smooth, flexible connector with 360° rotatable foldable head
- Ergonomic rubber grip
- Polished stainless steel mirror
UPC: 047084270004
Shipping weight: .18lbsAvailable on backorder
Quick View -
360 Degree Quick Disconnect Tool
$27.46Part No: 68600CV
360 Degree Quick Disconnect Tool
$27.46This handy quick disconnect tool allows the user to remove a two button type quick connector with one hand operation and easy to use in tight access applications. Multi angle design with a soft grip handle and durable curved jaws for easy and comfortable operation.
• Multi angle design with anti slip curved jaws
• Compact one handed operation for tight access applications
• Curved jaws with anti slip designUPC: 047084686003
Shipping weight: .125lbsQuick View -
Deburring Chamfer Tool Bit
$26.37Part No: 49100CV
Deburring Chamfer Tool Bit
$26.37Designed to clean and repair damaged bolts and fasteners. Can be used for hard steel applications with lubricating oil to improve tool performance. NOT recommended for use with Impact driver.
- Applicable for use on threads from 1/4″ to 3/4″ in diameter.
- 72 Degree deburring capacity
- 3-HSS blades
- 1/4″ bit Dr. to fit any drill type
UPC: 047084491003
Shipping Weight: .16lbsQuick View -
Brake Line Bending Tool
$25.82Part No: 76110CV
Brake Line Bending Tool
$25.82The 76110, Brake line bending tool, is designed to align, bend and adjust brake lines up to 3/6″/4.75MM in diameter. Comes with two 90 degree bending width options and a 6MM female hex slot for a secure hold while bending brake lines. Ergonomic design is suitable for one-handed operation.
- Design to bend brake lines with a 3/16″ – 4.75mm maximum diameter
- Fitted with a 15/64″ – 6mm hex slot for holding and bending brake lines
- Two 90 degree bending width options
- Coated with an anti-corrosion electrophoretic black paint
- Ergonomic design is suitable for one handed operation
- Compact features allows user to complete brake line bends in tight fitting applications
UPC: 047084761106
Shipping Weight: .35lbsAlso available:
75902 – Tube Bend Mirror AdaptersQuick View -
6″ Magnetic Tool Box Shelf
$25.36Part No: 90941CV
6″ Magnetic Tool Box Shelf
$25.36The 6″ Inch magnetic toolbox shelf tray comes with heavy duty, non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds fasteners, small parts, and tools by any work area, with a 4.51lbs holding weight capacity. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.
- Heavy Duty non-marring rubber coated magnets
- Industrial Grade powder coating finish resist rust and corrosion
- 6 inch tray holds various items
- 4.51LBS Weight Capacity
UPC: 047084909416
Shipping weight: 1.25lbsQuick View -
20” Rolling Head Pry Bar
$24.75Part No: 11700
20” Rolling Head Pry Bar
$24.75The 20” Rolling head Pry Bar is designed with a curved head design that ensures easy access in tight areas. Machined head and a hardened tip allow user to strike head if needed.
- Curved head design ensures better access in tight areas
- 20” Pry Bar length gives you extra leverage for heavier objects
- Black Oxide finish to resist rust and corrosion
UPC: 047084117002
Shipping weight: 1.95lbsQuick View
