CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Engine

  • Serpentine Belt Tool Set

    Serpentine Belt Tool Set

    $80.00

    Part No: 738

    Serpentine Belt Tool Set

    $80.00
    • Designed to remove and install serpentine belts on vehicles with spring-loaded belt tensioners
    • Eases removal and installation of serpentine belt
    • Extension bar for hard to access areas
    • Fits tensioner pulleys with 13mm-16mm, 18mm hex, or 3/8″ and 1/2″ square drives.
    • For hard to access tensioners, there are 13mm and 15mm, 12-point wrenches built into the handle.
    • 13mm, 14mm, and 15mm crows foot wrenches also included.

    UPC: 047084007389
    Shipping weight: 4.57lbs

    738 Replacement Parts

    Quick View
  • The Grabber Serpentine Belt Tool

    The Grabber Serpentine Belt Tool

    $29.00

    Part No: 734

    The Grabber Serpentine Belt Tool

    $29.00
    • Clamping jaw allows user to position serpentine belt without the belt slipping out of the tool.
    • Tru-grip and long reach allows belt routing in tight access areas that would normally be difficult if not impossible.
    • Body made of light-weight alloy steel for durability and strength.
    • Ergonomic handle provides comfort and ease in use acting as an extension of the users hand.
    • Patent Pending

    UPC: 047084007341
    Shipping weight: .95lb

    Quick View
  • 360 Degree Quick Disconnect Tool

    360 Degree Quick Disconnect Tool

    $24.99

    Part No: 68600CV

    360 Degree Quick Disconnect Tool

    $24.99

    This handy quick disconnect tool allows the user to remove a two button type quick connector with one hand operation and easy to use in tight access applications. Multi angle design with a soft grip handle and durable curved jaws for easy and comfortable operation.

    • Multi angle design with anti slip curved jaws
    • Compact one handed operation for tight access applications
    • Curved jaws with anti slip design

    UPC: 047084686003
    Shipping weight: .125lbs

    68600 Low Profile Disconnect Tool Flyer

    Quick View
  • Ford 6.0L Diesel Head Bolt Adapter

    Ford 6.0L Diesel Head Bolt Adapter

    $30.77

    Part No: 171CV

    Ford 6.0L Diesel Head Bolt Adapter

    $30.77

    Save time and money when removing and installing head bolts on Ford 6.0L diesel engines. There is no longer a need to remove the cab, worry about the rear heat shield or to disturb the A/C system with the access you with gain with this adapter.

    • Designed to loosen and tighten diesel head bolts on 6.0L Powerstroke® diesel engines
    • Offset of the adapter increases torque for loosening stubborn fasteners
    • The low-profile allows for easy access to head bolts without the need to remove multiple engine components, saving time
    • Reduces the overall time to complete engine work related to removing and installing cylinder heads
    • Get access to the cylinder head bolts without the need to remove the cab or dealing with freon recovery when removing the evaporator
    • ¾” Dr Female adapter with ½” Dr. Male

    UPC: 047084001714
    Shipping Weight: .99lbs

    Quick View
  • 3 Valve Replacement Insert

    3 Valve Replacement Insert

    $15.80

    Part No: 393-100

    3 Valve Replacement Insert

    $15.80

    Replacement insert for the 3 Valve Ford® Triton Engine kit, part 39300.

    • 16mm x 1.5
    • 3/4″-16 OD
    • Works with 2004-2008 Three Valve Ford® Triton Engines
    • Sold individually
    • Steel alloy insert with black oxide finish

    UPC: 047084393109
    Shipping Weight: .05lbs

    Quick View
  • Ford® Spark Plug Porcelain Extractor Kit

    Ford® Spark Plug Porcelain Extractor Kit

    $25.00

    Part No: 39200

    Ford® Spark Plug Porcelain Extractor Kit

    $25.00

    This tool is used to extract the broken porcelain from broken spark plugs in 2003 to current Ford® Triton Engines. In some cases, the porcelain will break off in the sleeve and will need to be extracted in order for the 39100 to function effectively. Unlike other tools that tell you to push the porcelain through the sleeve (Ford® says specifically not to do this), this tool adheres to the porcelain using a special perma-bond and then allows a user to extract the broken porcelain from the sleeve.

    UPC: 047084392003
    Shipping weight: .49lbs

    39200 – Spark Plug Removal Tool Instructions

    Quick View
  • Ford® & Mazda® Engine Valve Timing Kit

    Ford® & Mazda® Engine Valve Timing Kit

    $48.37

    Part No: 38300

    Ford® & Mazda® Engine Valve Timing Kit

    $48.37

    This easy alignment tool takes place of pins needed in similar tools. Pins can be hard to access and add time to job in cases where other components are needed. This also eliminates the user error with pins that can lead to pins being bent and stuck.

    • For servicing the timing belt chains, head gaskets, or other valve train repairs on Ford®, Mercury®, and Mazda vehicles
    • Applications: 2.0L DOHC Zetec engines found in 1994-2003 Ford® and Mercury® vehicles and 2004-2012 2.5L DOHC, 2.3L DOHC 4V, and 2.0L DOHC engines that are found in Ford®, Mercury®, and Mazda® vehicles
    • Easy alignment tool is screwed into sparkplug hole and turned by wrench to align cams.
    • Tool positions number 1 cylinder to top dead center by holding number 2 or 3 cylinder to bottom dead center

    UPC: 047084383001
    Shipping weight: 1.45lbs

    38300 CAMSHAFT ALIGNMENT TOOL INSTRUCTIONS

    Quick View
  • Adjustable Cylinder Hone Deglazer, 2″- 5″

    Adjustable Cylinder Hone Deglazer, 2″- 5″

    $34.00

    Part No: 32300

    Adjustable Cylinder Hone Deglazer, 2″- 5″

    $34.00

    An extremely versatile hone for 2″ – 5″ (56mm – 127mm) diameter cylinders for many applications.

    • For use with a high or low speed drill
    • Adjustable, knurled tension knob controls pressure for varying diameter cylinders
    • Fast cutting action
    • 3″ medium grit, 220 – 240 stones
    • Replacement Stones:
      • Part #324: Medium Grit Stone, 220-240, set of 3

    UPC: 047084323007
    Shipping weight: .6lbs

    Quick View
  • Crank Bolt Socket Set

    Crank Bolt Socket Set

    $90.00

    Part No: 980

    Crank Bolt Socket Set

    $90.00
    • Deep counter-weighted sockets to add more torque to break loose stubborn crank bolts specifically for Honda® and Toyota®. The set includes 17mm, 19mm, 21mm.
    • Applications:
      • Honda/Acura®, models: Accord, Civic, Pilot, CRV, Odyssey, CL TL Integra, MDX, vehicles
      • Toyota/Lexus® models: Camry, Corolla, 4Runner, Sequoia, ES300, LS400 vehicles
      • Any vehicle with a 17, 19, or 21mm crank bolt

    UPC: 047084009802
    Shipping weight: 6.25lbs

    Quick View
  • Stretch Belt Installation Tool

    Stretch Belt Installation Tool

    $16.00

    Part No: 736

    Stretch Belt Installation Tool

    $16.00
    • Quickly and easily installs Stretch Belts.
    • Will not damage stretch belts during installation.
    • Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
    • Eliminates the belt tensioner.
    • Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
    • Patented

    UPC: 047084007365
    Shipping weight: .1lbs

    Quick View
  • Euro Stretch Belt Installation Tool

    Euro Stretch Belt Installation Tool

    $18.97

    Part No: 735

    Euro Stretch Belt Installation Tool

    $18.97
    • Larger with different pin configuration to accommodate larger pulleys with different designs found on many European vehicles.
    • Quickly and easily installs stretch belts.
    • Will not damage stretch belts during installation.
    • Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
    • Eliminates the belt tensioner.
    • Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
    • Patented

    UPC: 047084007358
    Shipping weight: .2lbs

    Quick View