Shop
Showing 91–99 of 316 results
-
Ball Joint Separator
$33.09Part No: 184
Ball Joint Separator
$33.09This ball joint separator is used to separate ball joints from spindle support arms on almost all domestic and import, front wheel drive vehicles. This tool has two different joint positions that is adjustable up to 2″ for different sized ball joint applications.
- Use to separate ball joints from spindle
- Threaded forcing screw allow the tool to be used on different size ball joints
- Fits on virtually all domestic and import vehicles
- 13/16″ opening
- Replacement pin assembly: 184-1
- Replacement screw: 184-2
UPC: 047084001844
Shipping Weight: 2.75lbsQuick View -
Ball Joint Super Set
$193.89Part No: 196
Ball Joint Super Set
$193.89Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.
Contains:
- 3 receiver tubes
- 2- 3/4″ ID X 3″ OD
- 2- 1/4″ ID x 2 1/2″ OD
- 1- 3/4″ ID X 2″ OD
- Installation and removing adapters
- 1 installing cup
- 1 receiving cup
- 1 installing adapter
UPC: 047084001967
Shipping Weight: 14.83lbQuick View - 3 receiver tubes
-
Ball Joint Super Set
$370.00Part No: 197CV
Ball Joint Super Set
$370.00- This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks, vans, and SUVs through 2003; Dodge light trucks through 1998; Dodge vans, Durango, and Dakota through 2003; and Honda Accord Civic, del Sol, and Prelude through 2001.
- C-frame tool can be used alone to remove and replace universal joints
- Comes complete in durable case
UPC: 047084001974
Shipping Weight: 30lbsQuick View -
BEARING CUP INSTALLER
$105.33Part No: 20200
BEARING CUP INSTALLER
$105.33FEATURES
An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip.
- Install two bearing cups in one procedure on virtually all medium and light duty U-joints
- Manufactured from high-grade steel for strength and durability. Simple to use for instant results
Applications:
Light Duty to Medium Duty U joints.Parts Breakdown:
20201 C Frame
20202 Forcing Screw
20203 Flat Press Adapter
20204 O RingDimensions: 11.50″ x 1.85″ x 5.17″
Quick View -
Bearing Splitter, 4 1/4″ Capacity
$61.65Part No: 503
Bearing Splitter, 4 1/4″ Capacity
$61.65For removing generator gears, bearing cones, bearings, and similar parts that ordinary puller jaws cannot reach.
- Knife edges are flush on one side for easy pulling
- Bolts are heat treated for added strength
UPC: 047084005033
Shipping Weight: 1lbQuick View -
Bearing Splitter, Large
$145.00Part No: 511
Bearing Splitter, Large
$145.00• Designed to remove and pull bearings in tight areas
• Capacity 4″ to 6″
• Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
• Split and separate bearings where puller jaws cannot be used
• Made from industrial strength steelQuick View -
Bearing Splitter, Medium
$81.77Part No: 509CV
Bearing Splitter, Medium
$81.77Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 3″ to 4-1/2″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- 3 Ton Capacity
UPC: 047084005095
Shipping Weight: 4.29lbsQuick View -
Bearing Splitter, Small
$53.74Part No: 508CV
Bearing Splitter, Small
$53.74Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 1-1/4″ to 2-1/4″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
UPC: 047084005088
Shipping Weight: 1.33lbsQuick View -
Blind Hole Puller Set
$200.00Part No: 29CV
Blind Hole Puller Set
$200.00• Designed for removing bearings from a recessed location.
• Set includes a 2-1/2 lbs. slide hammer with T-handle and four collets, for a range of applications with 3/8″– 1-1/4″ (10mm to 32mm) inner diameter holes
• Ideal for removing pilot bearings29 Blind Hole Puller Set Breakdown
Cal-Van 29 – Instruction Manual
Quick View