Suspension and Wheel
Showing 1–12 of 38 results
-
HUB WHEEL BEARING MASTER SERVICE SET
$499.00Part No: 94000CV
HUB WHEEL BEARING MASTER SERVICE SET
$499.00Removes and Installs wheel hubs, bearing races and bearings.
Quick View -
Ball Joint Super Set
$370.00Part No: 197
Ball Joint Super Set
$370.00FEATURES
- This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks vans and SUVs through 2003; Dodge light trucks through 1998; Dodge vans Durango and Dakota through 2003; and Honda Accord Civic del Sol and Prelude through 2001.
- C-frame tool can be used alone to remove and replace universal joints
- Comes complete in durable case
Quick View -
Floor-Mounted, 2,200 lbs. Spring Compressor
$345.00Part No: 91300
Floor-Mounted, 2,200 lbs. Spring Compressor
$345.00The heavy-duty construction and Adaptive Spring Bracket allow the user to single-handedly compress many of the strut assemblies found on passenger cars, light-trucks, vans, and SUV’s.
FEATURES
- Adaptive Spring Bracket can be configured in multiple configurations
- For strut assemblies with spring coils 3.5″ to 8.75″ wide
- Accepts maximum spring height of 19″
- Can be used with varying coil diameters up to 5/8″
- Easy, one-person use
- Can be mounted to the floor (hardware not provided)
Available on backorder
Quick View -
New!
SHEPPARD M110 PITMAN ARM PULLER
$199.99Part No: 18630CV
SHEPPARD M110 PITMAN ARM PULLER
$199.99- Replaces less effective and often destructive methods to remove pitman arms
- Constructed of high-strength materials for increased pulling power
- Rated for usage with up to a 3/4″ drive impact for faster removal
- Applicable to highway transportation vehicles, RVs, buses, and equipment
Quick View -
SHEPPARD M100 PITMAN ARM PULLER
$199.00Part No: 18620
SHEPPARD M100 PITMAN ARM PULLER
$199.00Our M100 Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M100 steering gears found on many class 6 –8 vehicles.
- Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
- Constructed of high-strength materials for increased pulling power and superior durability
- Rated for usage with up to a ¾” drive impact wrench
- Simple and effective design with a wide application range
Applications: Class 6 –8 vehicles, including but not limited to highway transportation vehicles, buses, RVs, and other equipment
Warranty: Limited Lifetime Against Defects
Out of stock
Quick View -
Ball Joint Super Set
$193.89Part No: 196
Ball Joint Super Set
$193.89Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins
FEATURES
Contains:
- 3 receiver tubes
- 2- 3/4″ ID X 3″ OD
- 2- 1/4″ ID x 2 1/2″ OD
- 1- 3/4″ ID X 2″ OD
- Installation and removing adapters
- 1 installing cup
- 1 receiving cup
- 1 installing adapter
Quick View - 3 receiver tubes
-
Wheel Bearing Replacement Set Adapters
$166.91Part No: 904
Wheel Bearing Replacement Set Adapters
$166.91FEATURES
- Replace wheel bearings on front-wheel drive cars and light trucks without having to remove the steering knuckle and strut assembly
- Eliminates the need for a front-end alignment once completed
Quick View -
Intermediate Pitman Arm Puller
$155.00Part No: 18640
Intermediate Pitman Arm Puller
$155.00Our Intermediate Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from the steering gear found on many medium-duty vehicles.
- Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
- Constructed of high-strength materials for increased pulling power and superior durability
- Rated for usage with up to a ½” drive impact wrench
- Simple and effective design wide a wide application range
Applications: Heavy-duty pickups (1-ton and 2-ton), medium-duty trucks, box trucks, cab-and-chassis, and school buses
Warranty: Limited Lifetime Against Defects
Quick View -
Front End Service Kit
$150.00Part No: 185
Front End Service Kit
$150.00The Front End Service Kit Includes five tools used in the servicing of ball joints, pitman arms, and tie rods on most vehicles.
FEATURES
Contains:
- A large and small Pitman arm puller for ball Joint applications.
- Three different tie rod pullers.
- Two ball joint separators.
- Comes in a sturdy blow molded case
Quick View -
12 Point Metric Axle Nut Socket Set, 8 PC
$145.00Part No: 976
12 Point Metric Axle Nut Socket Set, 8 PC
$145.00FEATURES
- This set features eight heavy-duty metric sockets that fit axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep, Audi, Volkswagen, and BMW as well as many other makes
- Includes socket sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm
- Comes with a durable blow-molded case
Quick View -
6 Point Axle Nut Socket Set, 8 Piece
$143.49Part No: 966
6 Point Axle Nut Socket Set, 8 Piece
$143.49FEATURES
- Features eight 1/2″, 6-point, deep alloy sockets ideal for use in removing and installing axle nuts on a wide variety of domestic and import cars, trucks, and SUV’s
- The extra-long design ensures complete contact between the nut and socket and prevents slipping or distortion of the axle nuts during application
- Sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, and 39mm
Quick View -
4WD Locknut Socket Set, 6 Piece
$139.08Part No: 839
4WD Locknut Socket Set, 6 Piece
$139.08This high-quality steel, six-piece socket set features 1/2” square drives that enable technicians to use ratchets, breaker bars, and torque wrenches in their applications.
FEATURES
Includes:
- 4-lug socket
- 6-lug socket
- Toyota, 4-lug locknut socket
- Ford, 4-lug locknut socket
- FWD front spindle puller
Quick View