Results for "81"
-
Heavy Duty U-Joint Puller
$178.00Part No: 199
Heavy Duty U-Joint Puller
$178.00A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
- Engineered for use with up to a 1″ impact tool
- Eliminates dangerous vice-and-socket or hammering removal methods
- Does not damage the driveshaft, yokes, joints or bearing cups
Applications
- U-Joints with bearing cups 1.5″ to 2.2″ O.D
- Spicer 1610, 1710, 1760, 1810, 1880 Series
- Spicer SPL 140, 170, & 250 Life Series
- Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
- Meritor RPL 20, 25 Permalube™ Series
Quick View -
New!
10 TON PUSH PULLER
$139.95Part No: 18100CV
10 TON PUSH PULLER
$139.95- Designed to remove and install press to fit parts, gears, bearing and shafts
- Can be used with bearing pullers and pulley pulling attachments
- 10 Ton Capacity
- Cross Bar spread range 2-1/8″-7-1/4″
- Maximun reach of 8-1/4″
- Heavy Duty Truck Applications
Quick View -
Timing Pulley Puller
$107.20Part No: 181
Timing Pulley Puller
$107.20FEATURES
This tool is designed for removing drive pulleys with face grooves.
The tool removes a pulley absolutely free of any risk of damage.
The tool is adaptable to different pulley diameters, as the legs are adjustable.
For removing pulleys with 3, 6, 9 slots.Range is 42 to 82mm
Quick View -
Master Ratchet Accessory Set
$60.00Part No: 48100
Master Ratchet Accessory Set
$60.00FEATURES
- Set Includes many popular items available from Cal Van.
- All the items you need to get to tight access areas around corners and adapt sockets to step up and down.
- Set Includes: Two 2 Gearless Angle Drives two Twin Spin Converters and one 1 Finger Bit Driver w-bits.
Out of stock
Quick View -
Ford & Mazda Crankshaft Holder
$40.00Part No: 38100
Ford & Mazda Crankshaft Holder
$40.00A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt on many popular Ford and Mazda vehicles, or it can be used to turn the engine when doing timing work.
- Adapter securely fits the crankshaft tokeep it from rotating when loosening the pulley bolt
- The ½” drive tab allows for the use of a ratchet or breaker bar
- Ideal for timing-related jobs
- Heavy-duty construction and a rust resistant finish
Applications: Ford/Mazda 2005 2011 2.0L/2.3L/2.5L (including some Mercury and Volvo applications) (Hybrid models also)
Models: (Ford) Focus, Fusion, Escape, Ranger, Transit; (Mazda) MX 2,MX 3, MX 5, MX 6; CX 5, CX 9; (Mercury) Milan, MKZ, Mariner
Warranty: Lifetime Against Defects
Quick View -
Ford Harmonic Balancer Holder
$35.00Part No: 38110
Ford Harmonic Balancer Holder
$35.00A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford engines, or it can be used to turn the engine when doing timing work.
- Designed to fit multiple Ford vehicles ranging from 1992 to 2016
- The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
- The ½” drive knockout allows for the use of a ratchet or breaker bar
- Ideal for rotating the engine for timing-related jobs
- Will not warp balancer
- Heavy-duty construction
Quick View -
Logic Light Circuit Tester
$28.00Part No: 81
Logic Light Circuit Tester
$28.00This self-powered Logic Light removes the guesswork when testing live and non-live 6V, 12V and 24V DC electrical systems. It is simple to use and has patented LED edge-lighting to clearly distinguish power or ground. Use it to test for poor grounding, broken wires, and blown fuses. Creates less draw than traditional test lights with incandescent bulbs, protecting your electrical system while you work.
•Patented LED edge-lighting illuminates the handle red when power has been detected and green when grounded
•Internal power source allows user to test live and non-live DC systems (battery included)
•Save time by easily confirming a grounded circuitApplications:
For use with 6V/12V/24V automotive electrical systemsQuick View -
All Size Oil Filter Wrench
$9.72Part No: 814
All Size Oil Filter Wrench
$9.72FEATURES
- This filter wrench adjusts quickly to any spin-on filter up to 6in in diameter.
- Strong nylon web belt will not slip.
- Use with 1⁄2in square drive wrench.
- No. 814-02 Replacement Strap
Quick View