CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Results for "16"

  • New!

    BRAKE ANCHOR PIN PRESS

    $275.99

    Part No: 70100CV

    BRAKE ANCHOR PIN PRESS

    $275.99
    • Removes brake anchor pins and bushings on 16-1/2″ S-Cam trailers and Tractor Q brake systems
    • No need to remove hub or dust shield
    • 10 Ton capacity C-Frame
    • Easily removes seized anchor pins
    • Design for use with 1/2″ Impact Wrench
    Quick View

  • In-Line Dowel Pin Puller Master Set

    $250.00

    Part No: 95400

    In-Line Dowel Pin Puller Master Set

    $250.00

    FEATURES

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.

    • A simple and effective method for removing dowel pins
    • Can be used with an air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow-molded case
    • Patent pending

    Contains:
    SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
    Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm

    95200, In-Line Dowel Pin Puller Set, SAE Only
    95300, In-Line Dowel Pin Puller Metric, Metric Only

    Quick View

  • Heavy Duty U-Joint Puller

    $178.00

    Part No: 199

    Heavy Duty U-Joint Puller

    $178.00

    A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.

    • Engineered for use with up to a 1″ impact tool
    • Eliminates dangerous vice-and-socket or hammering removal methods
    • Does not damage the driveshaft, yokes, joints or bearing cups

    Applications

    • U-Joints with bearing cups 1.5″ to 2.2″ O.D
    • Spicer 1610, 1710, 1760, 1810, 1880 Series
    • Spicer SPL 140, 170, & 250 Life Series
    • Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
    • Meritor RPL 20, 25 Permalube™ Series
    Quick View

  • 7-Ton Bar Type Puller Bearing Separator Set

    $174.92

    Part No: 501

    7-Ton Bar Type Puller Bearing Separator Set

    $174.92

    FEATURES

    • Includes a Bearing Splitter with 4″ capacity two sets of hex push puller legs a 8″ bar type puller head mated with a custom thread forcing screw
    • Professionals have a Puller-Bearing set for hard jobs up to 7-tons larger applications and a greater reach 8″ to 16″
    Quick View

  • In-Line Dowel Pin Puller Set, SAE

    $160.00

    Part No: 95200

    In-Line Dowel Pin Puller Set, SAE

    $160.00

    FEATURES

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use outer sleeve and nut to extract the dowel.

    • Simple and effective method for removing dowel pins
    • Can be used with air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow molded case
    • Patent pending

    SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″

    95300, In-Line Dowel Pin Puller Metric, Metric
    95400, In-Line Dowel Pin Puller Master Set

     

    Quick View

  • Puller Bearing Separator Set, 5 Ton/ Bar Type

    $134.88

    Part No: 502

    Puller Bearing Separator Set, 5 Ton/ Bar Type

    $134.88

    FEATURES

    • Set includes two popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw
    • Separator tools are used with bar puller and legs for a wide variety of pulling jobs
    • The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools
    Quick View

  • 11 PC OXYGEN SENSOR SOCKET SET

    $125.00

    Part No: 84100CV

    11 PC OXYGEN SENSOR SOCKET SET

    $125.00

    A versatile set is used for the installation and removal of oxygen sensors on most domestic and import vehicles.

    FEATURES

    • Provides a method for removal and installation without damage to sensor
    • Includes the most popular sizes of oxygen sensor sockets
    • Comprised of SAE and metric sizes
    • Blow molded case included

    Includes:
    1/2″ Dr x 29mm x 6pt x 90mm
    3/8″ Dr x 7/8″ x 6pt x 90mm
    1/2″ Dr x 27mm x 12pt x 78mm
    3/8″ Dr x 7/8″ x 6pt x 80mm
    3/8″ Dr x 1″ & 1-1/16 ” x 74mm
    1/2″ Dr x 7/8″  x  50mm
    3/8″ Dr  x  7/8″ x  50mm
    1/2″ Dr x   1″ x  7/8″  6pt
    1/2″ Dr  x  22  x  6pt  x  88mm
    3/8″ Dr  x 22 x  6pt offset, deep
    Sensor Thread Chaser  M18 x 1.5

     

     

    Quick View

  • Hydraulic In-line Flaring Tool

    $110.00

    Part No: 166

    Hydraulic In-line Flaring Tool

    $110.00

    Integrates Hydraulic assist to create an easy to use, versatile kit. This time saving tool enables technicians to make perfect flares every time, even in tight access areas for on-car applications. It handles single, double, and bubble flares with the option to expand into quick connect fitting.

    FEATURES

    • Creates single, double, and bubble flares with the option to expand into quick-connect fittings
    • Includes Constant Tension Tube Cutter

    Tubing Sizes: 

    SAE: 3/16″, 1/4″, 5/16″, and 3/8″
    Metric: 4.75mm, 6mm, and 8mm

    Quick View
  • New!

    6PC. DIESEL INJECTOR LINE SOCKET SET

    $109.99

    Part No: 39660CV

    6PC. DIESEL INJECTOR LINE SOCKET SET

    $109.99
    • Designed to loosen and tighten injector lines on most diesel engines
    • Flex head function allow user to apply leverage and access at any desired angle
    •  6PT Crows foot socket prevents fastener round-off
    • 12mm & 14mm flex head sockets come with 3/8″ Dr.
    • 16mm, 17mm, 18mm &19mm flex head sockets come with 1/2″ Dr.
    Quick View

  • Double & Bubble Flaring Tool Set

    $105.17

    Part No: 82900

    Double & Bubble Flaring Tool Set

    $105.17

    FEATURES

    • This set contains the tools necessary to create single or double flares as well as Bubble Flares on soft steel and copper tubing.
    • This two-in-one kit contains the Double Flare Tool (Item #163) and the Bubble Flare Tool (Item #82700) in one convenient blow molded case.
    • Single & Double Flares 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, and 1⁄2 tubing.
    • Bubble Flares 4.75mm, 6mm, 8mm, 10mm tubing.
    • Includes Tube Cutter.

    Out of stock

    Quick View

  • 6 PC DOUBLE FLIP SOCKET

    $89.99

    Part No: 96110CV

    6 PC DOUBLE FLIP SOCKET

    $89.99

    The 6 piece double flip socket set is designed to easily remove damaged lug nut, using the 6 fluted twist socket end. Flip socket to other end and use a traditional 6 point to remove and install lug nuts. A 1/2″ Dr. 3″ extension bar is recommended to use during operation.

    • Standard 6 Point and 6 fluted twist flip socket design
    • 6 fluted twist end is designed to remove damaged lug nuts
    • Made from Chrome molybdenum steel for strength and durability
    • Black oxide coating resists corrosion
    • 1/2″ Dr. 3″ Extension Bar included

    Set Includes: 17MM Double Flip Socket, 19MM Double Flip Socket, 13/16″ Double Flip Socket, 21MM Double Flip Socket, 7/8″ Double Flip Socket, 1/2″ Dr. 3″ Extension Bar

    Quick View
  • Sale!

    16 PC MASTER WHEEL LOCKING NUT KEY SET

    Original price was: $119.99.Current price is: $89.99.

    Part No: 75510CV

    16 PC MASTER WHEEL LOCKING NUT KEY SET

    Original price was: $119.99.Current price is: $89.99.

    Locking lug nuts are a great deterrent of wheel theft, but for mechanics, they can quickly make an easy job more difficult. This set makes removing wheel locks simple. This set consists of 8 internally splined bits along with 8 hex and star bits.

    • Designed for removing many OEM and aftermarket specific locking wheel lug nuts
    • Reduces chances of damaging lug nuts or wheels
    • Chrome-vanadium construction and rust-resistant, black oxide finish
    • Contains eight inner-splined keys and eight outer-splined keys
    • All organized in a blow-molded case

    Inner-splined sizes:

    5-spline Short 5/8″, 6-spline 41/64″, 6-spline 45/64″, 7-spline Medium 5/8″, 7-spline Short 11/16″,
    7-spline Long 3/4″, 12-spline 11/16″, and 12-spline 13/16″

    Outer-splined sizes:

    8-pt Star 7/16″, 8-pt Star Lug 5/8″, 9-pt Star Lugs 1/2″, 10-pt Star Lug 1/2″, Fluted Hex 12mm Outer,
    Hex Lug 12mm, Hex Lug 15mm, and Hex Lug 9/16″

     

    Quick View

  • Tube Service Set

    $86.94

    Part No: 82800

    Tube Service Set

    $86.94

    FEATURES

    • This kit features the tools that a technician will need to make SAE single and double flares on soft steel or copper tubing. All of these tools come in one convenient blow molded case. Set contains:
    • Double flaring tool (Item # 163) for making single and double flares on soft steel or copper tubing.
    • Works on 3⁄16 1⁄4“, 5⁄16“,3⁄8“, and 1⁄2” tubing for single or double flares.
    • 151 Mini Tube cutter to cut 1⁄8” to 5⁄8” tubing
    • 758 Heavy Duty Tube Bender plier type bender that bends steel tubing 3⁄16“, 5⁄16” and 3⁄8” without kinking or collapsing.
    • A reamer to de-burr cut tubing and ensure better flares
    Quick View

  • Two & Three Jaw Adjustable Combination Puller, 8″ Spread

    $86.72

    Part No: 952

    Two & Three Jaw Adjustable Combination Puller, 8″ Spread

    $86.72

    These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.

    FEATURES

    • Pullers have standard threads, zinc, and black oxide finish
    • Yoke and jaws are forged, and all components heat-treated
    • 8″ spread, 9/16″ center screw- 20″ x 6-3/8″

    Also, available:

    134, 2-Ton, Two & Three Jaw Combination Puller
    3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″

    951 Two & Three Jaw Combination Reversible Puller
    3-1/2″, 7″ spread, 9/16″ center screw – 20″ x 6-3/8″

    Quick View

  • Two & Three Jaw Combination Reversible Puller, 7″ Spread

    $82.17

    Part No: 951

    Two & Three Jaw Combination Reversible Puller, 7″ Spread

    $82.17

    These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.

    FEATURES

    • Pullers have standard threads, zinc, and black oxide finish
    • Yoke and jaws are forged, and all components heat-treated
    • 7″ spread, 9/16″ center screw – 20″ x 6-3/8″

    Also, available:

    134, 2-Ton, Two & Three Jaw Combination Puller
    3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″

    952, 5-Ton, Two & Three Jaw Adjustable Combination Puller
    5-1/2″, 8″ spread, 9/16″ center screw- 20″ x 6-3/8″

    Quick View

  • Serpentine Belt Tool Set

    $80.00

    Part No: 738

    Serpentine Belt Tool Set

    $80.00

    FEATURES

    • Fits tensioner pulleys with 13mm-16mm 18mm hex or 3⁄8“” and 1⁄2“” square drives. For hard to access tensioners; there are 13mm and 15mm 12point wrenches built into the handle.
    • 13mm 14mm and 15mm crows foot wrenches also included.
    Quick View
  • New!

    6PC OIL FILTER WRENCH SET WITH HOLDER

    $75.00

    Part No: 99100CV

    6PC OIL FILTER WRENCH SET WITH HOLDER

    $75.00
    • Features a swivel handle that allows user to get to filters in hard to reach areas
    • Wide dimpled band securely grips filters without crushing
    • Ergonomic cushioned rubber grip
    • Heavy duty magnetic base holder for secure metal surface placement
    • Locknut allows user to tighten or loosen swivel handle feature
    • Sizes included:
      • Part #99001: 2-1/4″-2-7/8″ (57-73MM)
      • Part #99002: 2-9/16″-3-1/4″ (65-83MM)
      • Part #99003: 2-61/64″-3-3/4″ (75-95MM)
      • Part #99004: 3-5/8″-4-3/8″ (92-111MM)
      • Part #99005: 3-15/16″-4-23/32″ (100-120MM)
      • Part #99006:  4-23/32″-5-3/4″ (120-146MM)

    Available on backorder

    Quick View

  • Master In-Line Flaring Set

    $75.00

    Part No: 165

    Master In-Line Flaring Set

    $75.00

    FEATURES

    • The In-Line Flaring Tools unique design locks the adapters cone and tube in a perfect line making perfect factory flares every time with less risk of breaking adapters.
    • With the clamp and set screws putting pressure directly over the tube you greatly reduce the chance of the tube slipping from the clamp. Also this increases the overall life of the clamp by not wearing down the teeth inside from repeated slipping.
    • The slender low profile design of this tool allows the user to make flares on the vehicle and in tight spaces. Flares can be achieved along frame rails or areas in the engine compartment saving the user time from having to remove components or complete lines to make repairs.
    • Set includes everything needed to do the following:
    • 3⁄16“, 5⁄16“, 3⁄8” Double and Single Flares
    • 4.75mm, 6mm, 8mm Double and Bubble Flares
    Quick View

  • Power Steering Pump Remover and Installer Kit

    $73.77

    Part No: 195

    Power Steering Pump Remover and Installer Kit

    $73.77

    FEATURES

    • This kit has nearly everything you need to remove and install power steering pump pulleys in Chrysler Ford and GM vehicles with Saginaw Thompson and Ford C111 and C2 power steering pumps.
    • Fits 11⁄8“, 11⁄4“, 15⁄16“, and 13⁄8“” pulley hub diameters including 1988-newer GM cars equipped with Quad 4 engines; 1991-94 GM 3.1L V6; 1991-newer 3800 V6 engines; 1994-newer GM 3100 V6; 1999-newer GM 3400 V6 and 1992-newer Ford Crown Victoria and Mercury Grand Marquis with 4.6 V8 engine 1997-newer Ford truck with 4.2 & 4.6 V6, 5.4 V8, and 6.8 V10 engines.
    Quick View

  • 8 PIECE AIR BLOW GUN SET

    $73.34

    Part No: 40500CV

    8 PIECE AIR BLOW GUN SET

    $73.34

    This 8pc air blow gun kit comes with 7 different application interchangeable tips designed to blow off work areas, used to dry off surfaces and easily inflates pool toy and balloons.

    • Ideal for cleaning debris from work area
    • Use to dry off wet surfaces
    • Easily inflate pool toys and balloons
    • 1/4″ NPT Female Threaded Air Inlet

    Specs:

    • Air gun body working air pressure 160PSI
    • Air gun body maximum air pressure 220PSI
    • Air consumption at 160PSI without tip 15.0 CFM
    • Working temp range -4 degrees to 185 degrees

    Quick View